Equipment for maintenance checkup >> - the list of equipment for vehicle inspection >> equipment for inspection and auto service of the plant "GARO" >> brake testers STS
Brake stand STS-13U-SP-11P is designed to monitor the efficiency of the service and parking brake systems, as well as stability under braking cars, trucks, buses and trucks with axle loads up to 13 tons.
Also this Brake Tester can be called: STS13USP11P, STS 13U JV 11 P, STS-13U-SP11P, STS-13USP-11P, 11P STS13 USP.
The kit includes stand tester checks the wheels slip SSP 4000 (Cartec, Italy) with an axle load of 20 tonnes, which measures the deviation of the vehicle from the rectilinear motion.
The inner / outer ends of the rollers - 800/2800 mm.
The diameter of the wheel (on the bus) - 520-1300 mm.
Brake stands STS-13U-SP-11P supports inspection:
- Total specific brake force the service and parking brakes;
- Brake system response time;
- Coefficient of uneven braking forces wheels on one axle;
- Factor of compatibility links trains;
- Asynchronous time delay brake actuator units train ;
- Withdrawal from the wheels of the car straight.
Specifications brake testers STS-1 U-3 SP-11P
The installed capacity of electric equipment - 19 kW.
Axles - no more than 10.
The maximum power measured maximum brake force for 10 - 55 kW.
Operating temperature range - from +5 ° C to +35 ° C.
Supplied brake testers STS-13U-SP-11P:
Frame foundation STS - 1 piece.
The tester checks the wheels slip model SSP 4000 - 1 piece.
Frame foundation SSP 4000 - 1 piece.
The support device - left and right;
Wardrobe power - 1 piece.
Weighing System - 1 piece.
Module 4 WD - 1 piece.
Remote Control Set - 1 piece.
The force sensor on the control TC - 1 piece.
Sensor measuring the pressure in the pneumatic actuator - 1 piece.
Instrument rack SP-6 - 1 piece.
The bridge - 2 pcs.;
Chock - 2 pcs.;
Set the PC - Optional consumer;
Tool set for checking the stand - Optional consumer.
Disposition of the brake tester STS-13U-SP-11P
1. Tester withdrawal.
2. The device reference.
3. Wardrobe power.
4. Instrument cabinet.
6. Control rack with a set of personal computer and a laser printer.
Brake stand STS-13U-SP-11P after passing the initial calibration can be put into operation with the provision of the warranty is 12 months.
The warranty period may be extended by another 12 months in the case of a contract for service products.
The requirements and application instructions contain technical documentation that comes with the stand. Also, the product provides all the necessary certificates.