Products catalog

Q-meters (E4- and others)

Quality factor meter VM 560 (VM560, VM-560)
The range of frequencies - from 50 kHz to 35MGts (10 poddiapazonov);
The basic error of - 1%;
The limits of the measured quality factor - from 5ed. to 1000ed.
More info ...

Е4-10 измеритель добротности предназначен для прямого измерения коэффициента добротности катушек в НЧ и ВЧ диапазонах. Позволяет определять не только добротность и резонансную емкость катушек индуктивности, но и с достаточной точностью основные высокочастотные параметры двухполюсников.

Диапазон измерения:

- добротности катушек индуктивности (на пределах шкал 10-30-100-300) - от 2 до 300;

- индуктивности - от 25 мкГ до 10 Г;

- емкости контура - от 80 пФ до 0,11 мкФ;

- частот - от 1 кГц до 100 кГц.

More info ...


Quality factor measuring E4-11 (E411, E-4-11, E 4 11, E-411, E 411)

Provides efficient measurement object Q inductive nature as well as their self-capacitance and the resonant frequency of the circuit. By indirect measurements can determine the inductance of the measured object, the capacity, the amount of dissipation factor of capacitors, two-terminal resistance;
Frequency - 30MHz-300MHz;
Measuring range Q - 10-1000.
More info ...

Е4-4 измеритель добротности предназначен для измерения добротности катушек индуктивности, применяется для измерения добротности контуров, индуктивности и собственной емкости катушек индуктивности, емкости и тангенса угла потерь конденсаторов, полных сопротивлений двухполюсников.

Диапазон частот - от 50 кГц до 35 МГц.

Диапазон измерения:

- добротности - от 5 до 600;

- индуктивности - от 0,1 мкГн до 100 мГн.

More info ...


Е4-5А измеритель добротности служит для прямого измерения коэффициента добротности катушек в НЧ и ВЧ диапазонах, определяют резонансную емкость катушек индуктивности, а также с достаточной точностью основные высокочастотные параметры двухполюсников.

Частотный диапазон - 15 МГц - 250 МГц.

Пределы измерения емкости конденсатора измерительного блока - от 10 пФ до 100 пФ.

More info ...

Е4-7 измеритель добротности предназначен для измерения эффективной добротности объектов индуктивного характера, а также резонансной емкости этих объектов и резонансной частоты контуров.

Диапазон частот - от 50 кГц до 35 МГц.

Пределы измерения:

- добротности - от 5 до 1000;

- индуктивности - от 50 нГн до 0,4 Гн.

More info ...


Meter Q E9-4 (E94, E-9-4, E 9 4, E-94, E 94)
Designed to measure self-indicating an effective Q-factor inductors.
More info ...

Е9-5А измеритель добротности предназначен для измерения с непосредственным отчетом эффективной добротности катушек индуктивности.

Диапазон частот - от 15 МГц до 250 МГц.

Пределы измерения добротности - от 5 до 1200.

More info ...

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.


The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.


In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.


Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.


We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.


The online store takes an active part in such procedures as electronic bidding, tender, auction.


If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.