Products catalog

Testers

43101

Available:

17 pcs

The electric analogue instrument combined 43101
Is designed to measure AC and DC current and voltage, and resistance.
Accuracy class - 1.5, 2.5;
Measuring ranges:
- DC - Idc - 0.05 mA 10000mA;
- AC - Iperem - 0.05 mA 10000mA;
- DC - Upost - 0.0750 V-1000 V;
- AC - Uperem - 0.0750 V-1000 V;
- Resistance - R - 0,2 kW-10000 kW.
More info ...

43102

Available:

4 pcs

Combined electrical analogue instrument 43102
Designed for DC voltage, rms AC voltage sine wave, DC resistance, speed of the crankshaft of the engine, including engines with non-contact ignition system, and the angle of the closed state of the breaker contacts four-, six-and eight-cylinder engines with electric 12V and negative polarity of the "masses".
DC voltage - 0V-2V, 0V-20V, 0V-40V;
AC voltage - 60V-400V;
DC Resistance - 0 k = 0, 1 k, 0 k, 100 k;
Rotational speed of the engine crankshaft - 0min-1-1500min -1   0min-1-9000min -1;
The angle of the closed state of the breaker contacts - 0 º -45 º, 0 º -60 º, 0 º -90 º;
Acceptable basic error limit - ± 1,5%, ± 2,5%.
More info ...

43102-M1

Available:

3 pcs

    43102-M1 electronic measuring device combination is designed to measure various parameters of car engines.
    Limits of measurement:
    - DC voltage - 2.5 V; 25 V; 50 V;
    - AC voltage - 50 V; 500 V;
    - DC resistance - 0.1 ohms; 100 ohms;
    - Engine speed - 1500 min-1; 9000 min-1;
    - Corner of the closed state of contact breaker - 45°; 60°; 90°.
    The presentation of results - arrow.

More info ...

43103/2

Available:

8 pcs

43103/2 electric device combined with automatic protection against electrical overloads used to measure:

- power and the DC voltage - from 0.06 mA to 30 A; from 0.6 V to 12 kV;

- rms value of power and AC voltage sine wave - from 0.05 mA to 30 A; from 0.2 V to 12 kV;

- the peak value of the pulse power and voltage AC and DC areas - from 0.06 mA to 30 A; from 0.6 V up to 1200 V;

- DC resistance - from 0.2 Ohm to 30 MOhm;

- the absolute level of the signal voltage AC - from -12 dB to +3 dB.

More info ...

43104

Available:

7 pcs

The electric analogue instrument combined 43104
Is designed to measure AC and DC current and voltage, and resistance.
Accuracy class - 2.5, 4.0;
Measuring ranges:
- DC - Idc - 0.06 mA 3000mA;
- AC - Iperem - 0.06 mA 3000mA;
- DC - Upost - 0.6-1200V;
- AC - Uperem - 3V-1200V;
- Resistance - R - 0,2 kW-10000 kW.
More info ...

43109

Available:

14 pcs

The electric analogue instrument combined 43109
Designed to measure DC, AC and DC voltage, and resistance.
Accuracy class - 4.0;
Measuring ranges:
- DC - Idc - 0.05 mA, 500 mA;
- DC - Upost - 0.5-1000V;
- AC - Uperem - 10V-1000V;
- Resistance - R - 3 kW-300 kW.
More info ...

43201

Available:

4 pcs

     Electric tools 43201
     43201 electric tools - combined appliance designed for the measurement of AC and DC power.
     Range:
     -Voltage: 1 mV - 1000 V;
     - Current: 1mkA-30A;
     - Impedance: 0.5 ohm - 5MOm;
     - Capacity: 0.05 uF - 50mkF.
More info ...

43309.3

Available:

3 pcs

The electric analog combo device 43309.3 (433 093, 43309-3, 43 309 3)
Designed to measure AC and DC current and voltage, and resistance.
Measuring range
- DC - Ipost - 0 mA-10000mA;
- AC - Iperem - 0 mA-10000mA;
- DC - Upost - 0V-600V;
- AC - Uperem - 0V-600V;
- Resistance - R - 0-20000 ohms ohms.
More info ...

43312

Available:

4 pcs

43312 прибор комбинированный предназначается для измерения постоянных и переменных токов и напряжений и применяется для измерения поляризационного потенциала подземных изолированных трубопроводов для оценки защищенности от коррозии.

Класс точности - 1,5; 2; 4.

Пределы измерения:

- тока - 2 мА; 20 мА; 200 мА; 1 А;

- напряжения - 2 В; 20 В; 200 В; 1 кВ;

- сопротивления - 2 кОм; 20 кОм; 200 кОм.

More info ...

ТЛ-4М

Available:

3 pcs

ТЛ-4М тестер предназначен для измерения силы и напряжения постоянного тока, действующего значения силы и напряжения переменного тока синусоидальной формы, сопротивления постоянному току.

Пределы измерения:

- постоянного и переменного тока - от 0 до 3 А;

- переменного напряжения - от 0 до 1000 В;

- сопротивления - от 0 до 3 МОм;

- статического коэффициента усиления транзисторов по току - от 0 до 500.

More info ...
1
2
3
4
5
6
   View all 

LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

 

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

 

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

 

The company takes an active part in such procedures as electronic bidding, tender, auction.

 

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.