43103/2 43103/2
4.9 63

43103/2 electric device combined with automatic protection against electrical overloads used to measure:

- power and the DC voltage - from 0.06 mA to 30 A; from 0.6 V to 12 kV;

- rms value of power and AC voltage sine wave - from 0.05 mA to 30 A; from 0.2 V to 12 kV;

- the peak value of the pulse power and voltage AC and DC areas - from 0.06 mA to 30 A; from 0.6 V up to 1200 V;

- DC resistance - from 0.2 Ohm to 30 MOhm;

- the absolute level of the signal voltage AC - from -12 dB to +3 dB.

Electrical measuring instruments

Available in our warehouse:8 pcs от производителя.

Production under the order: any quantity.

Price

on request

  include VAT

-50%off factory price

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Technical characteristics

Device combined 43103/2

Also this device can be called: 43103-2, 43103 2.

 

43103/2 device electric combined with automatic protection against electrical overloads used to measure:

- force and voltage DC;

- root mean square value of power and AC voltage sine wave;

- the peak value of the pulse power and voltage AC and DC areas;

- DC resistance;

- the absolute signal level on the AC voltage;

- DC and AC with finite values of 6 kV and 12 kV voltage divider.

 

Scope: regulation, repair and operation of electrical and radio equipment in artificially controlled climatic conditions.

 

Specifications 43103/2:

 

Parameters dc current measurements:

- full-scale value - 0.06 mA; 0.3 mA; 0.6 mA; 3 mA; 6 mA; 30 mA; 120 mA; 300 mA; 1.2 mA; A 6; 30 A;

- limit the permissible basic error - ±1,0%;

- voltage - 0.5 V.

 

Parameters DC voltage measurement:

- full-scale value - 0.6 V; 1.2 V; 3 V; 12 V; 30 V; 120 V; 300 V; 1200 V; from 1 kV to 6 kV; 2 kV to 12 kV;

- limit the permissible basic error - ±1,0%; ±4,0%;

- own current consumption of the circuit being measured - 0.052 mA; 0.054 mA;

- current consumption from own built-in power supply with a voltage divider - 10 mA.

 

Measuring parameters of AC current:

- full-scale value - from 0.05 mA to 0.3 mA; from 0.1 mA to 0.6 mA; from 0,5 mA to 3 mA; from 1 mA to 6 mA; 5 mA to 30 mA; from 20 mA to 120 mA; from 50 mA to 300 mA; from 200 mA to 1200 mA; 1 A to 6 mA; from 0 to 30 A;

- limit the permissible basic error - ±2,5%;

- voltage - not more than 2 V; 0.5 V;

- own current consumption from the current source built - less than 0.5 mA.

 

Options AC voltage:

- end of the measuring range - from 0.2 V to 1.2 V; from 0.5 V to 3 V; from 2 V to 12 V; from 5 V to 30 V; from 20 V to 120 V; from 50 V to 300 V; from 200 V to 1200 V; from 1 kV to 6 kV; 2 kV to 12 kV;

- limit the permissible basic error - ±2,5%; ±4,0%;

- own current consumption of the circuit being measured - 3.075 mA; 1,537 mA; 0.615 mA; 0.260 mA; 0.054 mA;

- current consumption from own built-in power supply with a voltage divider - 10 mA.

 

Parameters measuring the strength of the pulse current:

- full-scale value - 0.06 mA; 0.3 mA; 0.6 mA; 3 mA; 6 mA; 30 mA; 120 mA; 300 mA; 1.2 A; A 6; 30 A;

- limit the permissible basic error - ±5,0%;

- voltage - 0.5 V.

 

Measurement parameters of voltage pulsed current:

- full-scale value - 1.2 V; 3 V; 12 V; 30 V; 120 V; 300 V; 1200 V; 0.6 V;

- limit the permissible basic error - ±5,0%;

- own current consumption of the circuit being measured - 0.054 mA;

- own current consumption from the current source built - 1.8 mA.

 

Measurement parameters DC resistance:

- full-scale value - 0.2 Ohm; 3 Ohm; 30 Ohm; 300 Ohm; 30 MOhm;

- limit the permissible basic error - ±1,0%;

- own current consumption from the current source built - 10 mA; 30 mA; 3 mA; 0.3 mA; 15 mA.

 

Parameters measure the absolute level of the signal voltage:

- end of the measuring range - from -12 dB to +3 dB;

- limit the permissible basic error - ±2,5%;

- own current consumption of the circuit being measured - 3 mA.

 

Settling time readings 43103/2 - 4 s.

Warm-up time - not more than 10 min.

Continuous operation - 16 hours.

 

Insulation tester between housing and housing isolated from the DC electric circuits of the device and the voltage divider stand for 1 min test voltage AC frequency (50±1) Hz, the mean value is equal to 5 kV to 22 kV and the device to a voltage divider with device.

 

Tester stands for 0.5 s short-term overloads, the maximum value of less than 25-fold of the final value of the measuring range, but not more than 50 A serial and parallel 2 kV circuits.

 

Dimensions - 300×120×104 mm.

Unit weight - less than 1.6 kg.

 

Operating conditions 43103/2:

 

The ambient air temperature - from -30° C to +50° C.

Relative humidity at +25° C - 80%.

Atmospheric pressure - from 84 kPa to 106.7 kPa (630 mm hg. to 800 mm hg.)

Photos: 43103/2

43103/2 device image.

43103/2 device image.

43103/2 view panel of the device.

43103/2 view panel of the device.

43103/2 side view.

43103/2 side view.

43103/2 side view.

43103/2 side view.

43103/2 bottom view.

43103/2 bottom view.

LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

 

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

 

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

 

The company takes an active part in such procedures as electronic bidding, tender, auction.

 

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.