Products catalog

brake testers STM (Meta)

STM 3000М.01

Available:

1 pc

Price

378 950 UAH

include VAT

Brake tester STM 3000M.01 - low-profile one-piece brake tester is designed for testing of brake systems, vehicle control and braking performance stability under braking vehicles with axle load up to 3000 kg - cars, four-wheel drive, vans and small trucks.

Measuring range of braking force - from 0 kN to 10 kN.

Measuring range of force applied to the brake systems of governments - from 0 N to 1000 N.

Mass measurement range - from 0 kg to 3000 kg.

More info ...

STM 3000М.02

Price

399 750 UAH

include VAT

Tester STM 3000M.02 - compact, low-profile tester is designed for testing of brake systems, vehicle control and braking performance stability under braking vehicles with axle load up to 3000 kg - cars, four-wheel drive, vans and small trucks.

Measuring range of braking force - from 0 kN to 10 kN.

Measuring range of force applied to the brake systems of governments - from 0 N to 1000 N.

Mass measurement range - from 0 kg to 3000 kg.

More info ...

STM-16000.02

Available:

1 pc

Brake stand STM-16000.02 - universal monobloc brake tester, designed to test the brake systems of all types of cars and trucks with axle loads up to 16 000 kg - all passenger, all-wheel drive, vans, buses, trucks and other, including heavy.

Measuring range of the braking force at each wheel axle checked - from 0 to 40 kN.

Measuring range effort on the control - from 0 N to 1000 N.

Range of weight measurement axis - from 0 kg to 16 000 kg.

Measuring range brake system response time - from 0 sec to 1,5 sec.

More info ...

STM-18000

Available:

1 pc

Price

1 075 000 UAH

include VAT

Versatile two-speed modular brake testers STM-18000 is designed to measure all the parameters of the braking system of all types of vehicles with axle load of 18 000 kg - all passenger, all-wheel drive, vans, buses, trucks, etc., including heavy.

Measuring range of the braking force at each wheel axle checked - from 0 kN to 24 kN, from 0 kN to 60 kN.

Measuring range effort on the control - from 0 N to 1000 N.

Mass axis measuring range - from 0 kg to 9000 kg, from 9000 kg to 18 000 kg.

Measuring range of brake system response time - from 0 sec to 2 sec.

More info ...

ДП-020

Available:

2 pcs

no-image

ДП-020 динамометр-приставка предназначен для контроля правильности настройки стояночного тормоза пассажирских и грузопассажирских автомобилей, автобусов, пассажирских автопоездов.

Динамометры-приставки ДП-020 входят в комплект тормозных стендов СТМ и применяются на станциях государственного технического осмотра АТС, станциях технического обслуживания, предприятиях автомобильной промышленности, а также при ежегодном техническом осмотре.

More info ...
Каркас-ложемент для тормозного стенда СТМ-10000 More info ...
no-image

Каркас-ложемент для тормозного стенда СТМ-15000У используется при проведении государственного ТО 2009г.

More info ...
Каркас-ложемент для тормозного стенда СТМ-16000.02 More info ...
    Каркас-ложемент для тормозного стенда СТМ-3500М 
    Используется при проведении гостехосмотра.
More info ...
no-image

Каркас-ложемент для тормозного стенда СТМ-8000 для станции техосмотра.

More info ...
1
2
3
   View all 

LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

 

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

 

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

 

The company takes an active part in such procedures as electronic bidding, tender, auction.

 

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.