brake testers STM (Meta)
Brake tester STM 3000M.01 - low-profile one-piece brake tester is designed for testing of brake systems, vehicle control and braking performance stability under braking vehicles with axle load up to 3000 kg - cars, four-wheel drive, vans and small trucks.
Measuring range of braking force - from 0 kN to 10 kN.
Measuring range of force applied to the brake systems of governments - from 0 N to 1000 N.
Mass measurement range - from 0 kg to 3000 kg.
More info ...
Tester STM 3000M.02 - compact, low-profile tester is designed for testing of brake systems, vehicle control and braking performance stability under braking vehicles with axle load up to 3000 kg - cars, four-wheel drive, vans and small trucks.
Measuring range of braking force - from 0 kN to 10 kN.
Measuring range of force applied to the brake systems of governments - from 0 N to 1000 N.
Mass measurement range - from 0 kg to 3000 kg.
More info ...
Brake stand STM-16000.02 - universal monobloc brake tester, designed to test the brake systems of all types of cars and trucks with axle loads up to 16 000 kg - all passenger, all-wheel drive, vans, buses, trucks and other, including heavy.
Measuring range of the braking force at each wheel axle checked - from 0 to 40 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Range of weight measurement axis - from 0 kg to 16 000 kg.
Measuring range brake system response time - from 0 sec to 1,5 sec.
More info ...
Versatile two-speed modular brake testers STM-18000 is designed to measure all the parameters of the braking system of all types of vehicles with axle load of 18 000 kg - all passenger, all-wheel drive, vans, buses, trucks, etc., including heavy.
Measuring range of the braking force at each wheel axle checked - from 0 kN to 24 kN, from 0 kN to 60 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Mass axis measuring range - from 0 kg to 9000 kg, from 9000 kg to 18 000 kg.
Measuring range of brake system response time - from 0 sec to 2 sec.
More info ...
ДП-020 динамометр-приставка предназначен для контроля правильности настройки стояночного тормоза пассажирских и грузопассажирских автомобилей, автобусов, пассажирских автопоездов.
Динамометры-приставки ДП-020 входят в комплект тормозных стендов СТМ и применяются на станциях государственного технического осмотра АТС, станциях технического обслуживания, предприятиях автомобильной промышленности, а также при ежегодном техническом осмотре.
More info ...
Каркас-ложемент для тормозного стенда СТМ-15000У используется при проведении государственного ТО 2009г.
More info ...
Используется при проведении гостехосмотра.
Каркас-ложемент для тормозного стенда СТМ-8000 для станции техосмотра.
More info ...
Universal monobloc brake tester STM-10000 is designed to measure all the parameters of the brake system of all types of vehicles with an axle load of up to 10 000 kg - cars, four-wheel drive, vans, trucks and buses.
The measuring range of the braking force at each wheel axle checked - from 0 to 25 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Range of weight measurement axis - from 0 kg to 10 000 kg.
More info ...
Brake tester STM-13000.01 - universal monobloc brake tester, designed to test the brake systems of all types of cars and trucks with axle loads up to 13 000 kg - all passenger, all-wheel drive, vans, buses, trucks and other, including heavy.
Measuring range of the braking force at each wheel axle checked - from 0 to 30 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Range of weight measurement axis - from 0 kg to 13 000 kg.
Measuring range brake system response time - from 0 sec to 1,5 sec.
More info ...
Tester STM-13000.02 - universal modular tester, designed to test the brake systems of all types of cars and trucks with axle loads up to 13 000 kg - all passenger, all-wheel drive, vans, buses, trucks and other, including heavy.
Measuring range of the braking force at each wheel axle checked - from 0 to 30 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Range of weight measurement axis - from 0 kg to 13 000 kg.
Tester STM-1500 - tester for monitoring the performance of brake systems and sustainability Motorcycle axle load up to 1500 kg.
The measuring range of the braking force at each wheel axle checked - from 0 kN to 5 kN.
Mass axis measuring range - from 0 kg to 1500 kg.
Measuring range effort on the control - from 0 N to 1000 N.
Brake tester STM-15000 - universal monobloc stand, which designed to measure all the parameters of the brake system of all types of vehicles with an axle load of 12 000 kg - all passenger, all-wheel drive, vans, buses, trucks and other, including heavy.
Measuring range of the braking force at each wheel axle checked - from 0 "> kN to 26 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Range of weight measurement axis - from 0 kg to 12 000 kg.
Measuring range brake system response time - from 0 seconds to 2 seconds.
More info ...
Brake tester STM-15000U - universal modular stand, which designed to measure all the parameters of the brake system of all types of vehicles with an axle load of 15 000 kg - all passenger, all-wheel drive, vans, buses, trucks and other, including heavy.
Measuring range of the braking force at each wheel axle checked - from 0 kN to 40 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Range of weight measurement axis - from 0 kg to 15 000 kg.
Measuring range brake system response time - from 0 seconds to 2 seconds.
More info ...
Brake tester STM-15000U (mono) - universal monobloc stand, which designed to measure all the parameters of the brake system of all types of vehicles with an axle load of 15 000 kg - all passenger, all-wheel drive, vans, buses, trucks and other, including heavy.
Measuring range of the braking force at each wheel axle checked - from 0 kN to 40 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Range of weight measurement axis - from 0 kg to 15 000 kg.
Universal roller brake tester STM 15000U.01 is designed to measure all the parameters of the brake system of all types of vehicles with an axle load of 18 000 kg - all passenger, all-wheel drive, vans, buses, trucks and other, including heavy .
Measuring range of the braking force at each wheel axle checked - from 0 kN to 40 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Range of weight measurement axis - from 0 kg to 18 000 kg.
Measuring range brake system response time - from 0 seconds to 2 seconds.
Brake stands series STM-15000U.01 staffed monolithic type rollers with spikes cut-out (do not require periodic renewal or "welding on"), the factory warranty on the rollers of this type 12 years!
Brake stand STM-16000.01 - universal monobloc brake tester, designed to test the brake systems of all types of cars and trucks with axle loads up to 16 000 kg - all passenger, all-wheel drive, vans, buses, trucks and other, including heavy.
Measuring range of the braking force at each wheel axle checked - from 0 to 40 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Range of weight measurement axis - from 0 kg to 16 000 kg.
Measuring range brake system response time - from 0 sec to 1,5 sec.
More info ...
Brake Tester STM-3500 - universal brake tester, which is designed for testing of brake systems, vehicle control and braking performance stability under braking vehicles with axle load up to 3500 kg - cars, four-wheel drive, vans and small trucks.
Measuring range of the braking force at each wheel , checked axis - from 0 kN to 10 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Range of measurement of mass (weight) of the axis - from 0 kg to 3500 kg.
More info ...
Monoblock roller brake tester STM-3500M is designed to measure all the parameters of the braking system of vehicles axle load up to 3500 kg - passenger , all-wheel drive , vans and small trucks.
Measuring range of the braking force at each wheel , checked axis - from 0 kN to 10 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Range of measurement of mass (weight) of the axis - from 0 kg to 3500 kg.
Measuring range brake system response time - from 0 seconds to 2 seconds.
Guarantee to cover the roller 12 years.
More info ...
Brake testing STM-3500MM (STM-3500 MM, STM-3500-MM; stm-3500mm; stm-3500 mm; stm-3500-mm)
STM-3500MM - universal tester, designed to test the motorcycle with axle load up to 1500 kg.
The range of measurement of mass (weight) of the axis - 0-1500kg.
Parameters of the three-phase four-wire power supply with tolerance 380V +10% ± 15%, 50Hz.
Mobile Low Profile Roller brake tester STM-3500MN is designed to measure all the parameters of the braking system with axle load up to 3 500 kg - cars, four-wheel drive, vans and small trucks.
With a minimum weight of the roller units (a total of 170 kg), small size and capabilities of autonomous power supply from diesel generator currently stand - ideal for smaller stations and mobile point checkup!
Is unparalleled in its class!
Guarantee to cover the roller 12 years.
More info ...
Brake Tester STM-3500N - low-profile universal tester, which is designed for testing of brake systems, vehicle control and braking performance stability under braking vehicles with axle load up to 3500 kg - cars, four-wheel drive, vans and small trucks.
Measuring range of the braking force at each wheel, checked axis - from 0 kN to 10 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Range of measurement of mass (weight) of the axis - from 0 kg to 3500 kg.
Measuring range brake system response time - from 0 seconds to 2 seconds.
Guarantee to cover the roller 12 years.
More info ...
Brake tester STM-6000 - two-speed universal stand for all parameters of the brake system of all types of passenger cars and trucks with axle load up to 6000 kg.
Measuring range of the braking force at each wheel axle checked - from 0 kN to 18 kN, from 0 kN to 27 kN.
Measuring range effort on the control - from 0 N to 1000 N.
Mass axis measuring range - from 0 kg to 3500 kg, from 3500 kg to 6000 kg.
Rolling monoblock brake tester STM-8000 is designed to measure all the parameters of the brake system of all types of vehicles with an axle load of up to 10 000 kg - cars, four-wheel drive, vans, trucks and buses.
The width of the roller installation brake tester STM-8000 all 2950 mm - ideal for point inspection of cars and trucks with a small room! Increased rigidity of the ground!
Guarantee to cover the roller 12 years.
More info ...
Тормозной стенд предназначен для диагностики рабочей и стояночной тормозных систем всех типов легковых и грузовых автомобилей с одной или несколькими ведущими осями - все легковые, полноприводные, микроавтобусы, автобусы, грузовые и прочие, включая большегрузные.
Тормозные стенды применяются на участках диагностики тормозной системы для проверки работоспособности одного из ключевых узлов автомобиля - тормозной системы, от исправности которой зависит безопасность водителя и пассажиров.
More info ...Sales department
Увага!
Due to the large number of incoming orders, in order to speed up their processing, new applications are accepted only at
Email, or via the
, or via the
Ukraine, Lviv
Gorodotskaya, 222
Mon-Fri 8:00 - 18:00
Our works(35)
Installation of the lodgement and the STM-15000U.01 stand
Connecting the brake stand STM-15000U
Connecting a low-profile stand STM-3500MN
Installation of a two-speed stand STM-15000U.01
Work on the installation of the line of maintenance of trucks
Poll
How did you find out about zapadpribor.com?
Products in this category
Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.
The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.
In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.
Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.
We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba, Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.
We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.
The online store takes an active part in such procedures as electronic bidding, tender, auction.
If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.
Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.
While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.
In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.
On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.
All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.
If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.
We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.
We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.