Products catalog



Set of measures capacity of the E1-3 model 3rd digit (E13, E1 3, e1-3, e13, e1 3)
100pF, 200pf, 300pf, 500pf, 1000pf
Accuracy class PG ± (0,2 ÷ 2)%
Measurement range (100 - 30000) kHz; (10-2 - 105) Ω

More info ...


Measure KME-101 low-capacity exemplary (KME101, KME 101, kme-101 LME-101 KME101, LME 101, KMЄ-101 KMЄ101, KMЄ 101, kme101, kme 101)
Designed for calibration of measuring electrical capacitance in the frequency range up to 100kHz, as well as for use as elements of measuring alternating current circuits;
The nominal value of capacitance - 10 pF;
Accuracy class - 0.05, 0.1.
More info ...


A measure KME-11 of the low-capacity exemplary (KME 11, KME11)

More info ...

МЕ4 магазин емкостей переносной лабораторный со слюдяными конденсаторами предназначенный для включения в измерительные схемы переменного тока, когда требуется определенное значение емкости.

Верхний предел значения емкости - 2 мкФ.

Включение в схемы переменного тока с частотой, для определенных значений емкости - от 50 Гц до 1500 Гц.

Отклонение от истинного значения отсчитанной по положению штепсельных ключей емкости - не более 0,5%.

More info ...


МЕ5020 магазин емкости предназначен для применения в качестве меры или элементов измерительных цепей переменного тока частотой от 40 Гц до 60 Гц.

Диапазон изменения емкости магазина - 111,0001 мкФ.

Класс точности магазина - 0,1; 0,5.

More info ...
Capacitance Box Р5025 (Р-5025, Р 5025, r5025, r 5025, r-5025)
Designed to be used as standard or AC circuits measuring element with frequency from 40Hz to 40kHz.
Capacitance Box measuring range from initial to 111,0001 mkF.
Accuracy class:
     • 0.1 - for decades 0.0001-0.0011; 0.001-0.009; 0.01-0.09 and 0.1-0.9 mkF;
     • 0.5 - for decades 1-10 and 10-100 mkF.
More info ...
R5026 basic block to the bridge AC R5026M (R 5026M, R-5026M, R5026 M, R 5026 M, R-5026 M, R5026 M, R 5026-M, R-5026-M, p5026m, p 5026m, p-5026m , p5026-m, p 5026-m, p-5026-m, p5026 m, p 5026 m, p-5026 m)
Designed to measure the capacitance and dielectric loss tangent of high-voltage industrial insulation on the "straight" (both pins are isolated from the object to be measured "ground") and "inverted" (one of the conclusions of the measured object is connected to "earth") schemes under operational conditions, directly on the installation location, as well as for the measurement of "direct" scheme in the laboratory capacity and dielectric loss tangent of various insulating materials and capacitors at 50 and 60Hz.
More info ...

Р5050 мера электрической емкости 1 разряда предназначена для применения в качестве меры или элемента измерительных цепей переменного тока.

Диапазон частот - от 40 Гц до 100 кГц.

Диапазон номинальных значений:

- емкости - от 1 пФ до 1000 пФ;

- тангенса угла потерь - 1·10-5.

More info ...

Р5064 резистор составных мер тангенса угла потерь предназначен для использования в качестве меры тангенса угла потерь в измерительных цепях переменного тока частоты от 0,04 до 100 кГц.

Частота сети переменного тока - от 0,04 кГц до 100 кГц.

Номинальная емкость резисторов:

- в схеме последовательного соединения - 0,1 пФ;

- в схеме параллельного соединения - 15 пФ.

More info ...

Р5076 конденсатор переменной емкости предназначен для применения в качестве меры или элемента измерительных цепей переменного тока по двухзажимной системе включения.

Класс точности - 0,2.

Диапазон изменения емкости - от 0 до 35 мкФ.

More info ...
   View all 

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.


The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.


In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.


Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.


We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.


The online store takes an active part in such procedures as electronic bidding, tender, auction.


If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.