Products catalog

frequency counters F

Ф5007

Available:

4 pcs

Ф5007 счетчик программный реверсивный предназначается для счета импульсов и других величин, преобразуемых в электрические сигналы.

Емкость счетчика - 7 десятичных разрядов и 1 знаковый разряд.

Диапазон частот входных сигналов в режиме счета по входам «А» и «Б» в отдельности:

- при синусоидальных сигналах - от 10 Гц до 1 МГц;

- при импульсных сигналах - от 0 до 1 МГц.

More info ...

Ф5034

Available:

15 pcs

Ф5034 частотомер-хронометр электронно-счётный предназначен для измерений частоты и периода электрических колебаний, длительности импульсов и интервалов времени, отношения частот.

Частота электрических колебаний - от 0,1 Гц до 50 МГц.

Период электрических колебаний - от 0,1 Гц до 1 МГц.

Длительность импульсов - от 1 мкс до 105 с.

Интервал времени - от 10 мкс до 105 с.

Отношение частот приборов частотомеры Ф5034 - от 1:1 до 5·106:1.

Количество электрических импульсов - от 1 до 99 999 999.

More info ...

Ф5035

Available:

6 pcs

Ф5035 частотомер электронно-счетный предназначен для измерения частоты и периодов электрических колебаний, счета электрических сигналов, измерения процентного отклонения (со знаком) действительного значения измеряемой частоты от ее номинального значения, устанавливаемого на частотомере.

Диапазон частоты электрических колебаний - от 0,1 Гц до 50 МГц.

Измеряемый диапазон периода электрических колебаний - от 0,1 Гц до 10 МГц.

More info ...

F5041

Available:

3 pcs

Frequency counter-timer F5041 (F-5041, F 5041)
Designed to measure the frequency and period of oscillations, pulse width, frequency ratio, the electric pulses, as well as a frequency divider and oscillator frequency model;
The frequency of oscillations - 0.1 Hz-10MHz;
The period of oscillations - 0.1 Hz-1 MHz;
Pulse duration - 1mks-1c;
Time interval - 10mks-10 4 s;
Frequency ratio 1:1 - June 10: 1;
Account or summation of electrical impulses - to fill the meter.
More info ...

Ф5043

Available:

14 pcs

    Частотомер Ф5043 (Ф 5043, Ф-5043)
    Предназначен для измерений частоты переменного тока и может применяться в различных областях электротехнической и радиотехнической промышленности.
    Двадцать один узкий диапазон измерений: 25Гц-35Гц, 35Гц-45Гц, 45Гц-55Гц, 50Гц-70Гц, 70Гц-90Гц, 90Гц-110Гц, 125Гц-175Гц, 175Гц-225Гц, 225Гц-275Гц, 250Гц-350Гц, 350Гц-450Гц, 450Гц-550Гц, 500Гц-700Гц, 700Гц-900Гц, 900Гц-1100Гц, 1250Гц-1750Гц, 1750Гц-2250Гц, 2250Гц-2750Гц, 2500Гц-3500Гц, 3500Гц-4500Гц, 4500Гц-5500Гц и семь широких диапазонов измерений: 20Гц-200Гц, 40Гц-400Гц, 100Гц-1000Гц, 200Гц-2000Гц, 400Гц-4000Гц, 1000Гц-10000Гц, 2000Гц-20000Гц.
    Погрешность: ±0,1% для 45-55Гц и диапазонов, кратных ему; ±0,2% для 25-35 и 35-45 Гц и диапазонов, кратных им; ±0,5 для широких диапазонов.
More info ...

F5080

Available:

3 pcs

    F5080 frequency counter-chronometer designed to measure the frequency and period of oscillations , pulse duration , time intervals , as well as for use as a frequency divider and oscillator frequency model .
    Frequency counter measures :
    - The frequency of electric oscillations in the range from 0.1 Hz to 1.5 MHz;
    - Periods of oscillations in the frequency range from 0.1 Hz to 1 MHz;
    - The number of electrical impulses from 1 to 9999999 ;
    - Duration of the positive and negative pulses in the range from 10 ms to 107 ms;
    - The time intervals ranging from 10 ms to 105 s .
More info ...

Ф5137

Available:

2 pcs

Ф5137 частотомер электронно-счетный предназначается для измерения частоты и периодов электрических колебаний, длительности импульсов и интервалов времени, отношения частот, счета электрических импульсов, а также для работы в качестве делителя частоты и генератора образцовых частот.

Диапазон измеряемых частот - от 0,1 Гц до 100 МГц.

Диапазон измеряемых периодов - от 0,1 Гц до 1 МГц.

Вывод результатов в виде двоично-десятичного подекадного параллельно-последовательного кода 8-4-2-1.

More info ...

F5311

Available:

5 pcs

Frequency F5311-electron counting (F-5311, F 5311)
The range of measured frequency meter frequencies - from 10 -2 Hz to 1,5 ∙  10 Hz.
The range of measured periods - 7 ∙ 10 -9 to 1 0 2.
The range of measured frequency counter pulse durations and intervals of single - from 10 -7s to 1,5 ∙  10 with.
The range of measured frequency counter pulse durations and intervals averaged - 5 ∙ 10 -8s to 1,5 ∙  10 with.
The range of measured frequency ratios - from 1:1 to (10 9 -1): 1 in the frequency range from 10 -2 Hz to 1,5 ∙  10 Hz.
The range of measured frequency counter phase shifts - from 10 ° to 350 º at frequencies from 1 Hz to 2 ∙ 10 5.
The range of measured frequency counter numbers of oscillations through the latest accounts on one input - from 1 to 10 14.
The range of measured frequency counter numbers of oscillations through the accounts of the last two inputs in the forward and reverse directions is - from 10 10 to 10 10 to range from 10 to 2 Hz 1,5 ∙  10 Hz.
The range of measured absolute deviation of the measured value from the preset value of this quantity is - 10 to 10 units of the measured value.
The range of measured frequency meter percentage deviation of the measured value from the preset value of this quantity is - from -100% to 100%.
More info ...

Ф551 частотомер электронный с цифровым отсчетом предназначен для измерения частоты и периодов колебаний за определенный промежуток времени.

Диапазон измерения частоты - от 10 Гц до 200 кГц.

Диапазон измерения периода - от 10 Гц до 100 кГц.

More info ...

Ф552 частотомер электронный с цифровым отсчетом предназначен для точных точечных замеров показаний скважинных приборов и для калибровки аппаратуры.

Диапазон частоты - от 0,1 Гц до 1,5 Гц.

Период колебаний - от 0,1 Гц до 1 МГц.

More info ...
1
2
   View all 

LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

 

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

 

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

 

The company takes an active part in such procedures as electronic bidding, tender, auction.

 

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.