Products catalog

attenuators D1

D1-13

Available:

3 pcs

Installation for testing attenuators D1-13 (D113, D1 13, D-113, D 113, D-1-13)
Intended for use as a model for easing measures calibration attenuators meter attenuation of D1 and electronic voltmeters, B2, B3, B6, B7;
Frequency range - 0MGts-30MHz;
Attenuation range - from 0dB to 110dB;
Reduce error - 0.004 dB, 0, 022dB.
More info ...

D1-13A

Available:

3 pcs

Setup for calibration attenuators D1-13A (D113A, D 1 13 A, D-1-13-A, D1 13A)
It is intended for use as the exemplary steps for reducing calibration attenuators, meters weakening of D1 and electronic voltmeters, B2, B3, B6, B7;
Frequency range - 0MGts-30MHz;
Attenuation range - from 0 dB to 90 dB;
Error attenuation - 0.004 dB = 0, 022dB.
More info ...

Д1-14

Available:

5 pcs

Д1-14 установка для проверки аттенюатора предназначена для измерения модуля коэффициента передачи аттенюаторов (встроенных и отдельных), пассивных и активных четырехполюсников в широком частотном диапазоне.

Рабочий диапазон частот - от 0,1 Гц до 37 500 МГц.

More info ...

D1-14/1

Available:

5 pcs

Installation for testing attenuators and devices for measuring attenuations D1-14/1 (D114/1, D1 14/1, D-114/1, D 114/1, D-1-14/1)

It is intended for measuring the attenuation of fixed attenuator ferrite valves plavnoperemennyh and step attenuators, gain RF amplifier, and directional coupling factor of directional couplers, high VSWR with high accuracy by using the measuring line (unit is used as an indicator);
Frequency range - 10 -4 to 17 GHz, 44GGts;
Attenuation measurement range - 0-100 (10 GHz -4 0 05GGts about 0.1), 0-100 (0.05 GHz 2 15GGts about 10 -4 W) 0-90 (2.15 GHz 7 2GHz about 10 -4 W), 0.85 (7.2 Hz-17, 44 relative to 10 -4 W).
More info ...

Д1-17 измеритель

Available:

2 pcs

Д1-17 измеритель ослабления предназначен для измерения ослабления фиксированных аттенюаторов, ферритовых вентилей, плавнопеременных и ступенчатых аттенюаторов, коэффициента усиления высоко частотных усилителей, направленности и переходного ослабления направленных ответвителей, больших КСВН с высокой точностью с помощью измерительной линии.

Диапазон частот - от 0,1 МГц до 37,5 ГГц.

Диапазон измеряемых ослаблений в диапазоне частот от 0,1 МГц до 1200 МГц - от 0 до 120 дБ.

More info ...

Д1-17/1 установка

Available:

3 pcs

Д1-17/1 установка для измерения ослабления предназначена для измерения ослабления фиксированных аттенюаторов, ферритовых вентилей, плавнопеременных и ступенчатых аттенюаторов, коэффициента усиления высокочастотных усилителей, направленности и переходного ослабления направленных ответвителей, больших КСВН с высокой точностью с помощью измерительной линии.

Диапазон частот - от 0,0001 ГГц до 17,85 ГГц.

Пределы измеряемых ослаблений в диапазоне частот:

- от 0,0001 ГГц до 1,2 ГГц - от 0 до 120 дБ;

- от 1,2 ГГц до 17,85 ГГц - от 0 до 100 дБ.

More info ...

Д1-17/2 измеритель

Available:

5 pcs

no-image

Д1-17/2 измеритель ослабления предназначен для измерения ослабления фиксированных аттенюаторов, ферритовых вентилей, плавнопеременных и ступенчатых аттенюаторов, коэффициента усиления высокочастотных усилителей, направленности и переходного ослабления направленных ответвителей, больших КСВН с высокой точностью с помощью измерительной линии.

Диапазон частот - от 17,44 ГГц до 37,5 ГГц.

More info ...

Д1-17/3 измеритель

Available:

4 pcs

Д1-17/3 измеритель ослабления предназначен для измерения ослабления фиксированных аттенюаторов, ферритовых вентилей, плавно-переменных и ступенчатых аттенюаторов, коэффициента усиления высокочастотных усилителей, направленности и переходного ослабления направленных ответвителей, больших КСВН с высокой точностью с помощью измерительной линии.

Диапазон частот - от 0,1 МГц до 1,2 ГГц.

More info ...

Д1-2 установка

Available:

2 pcs

no-image

Д1-2 установка образцовая предназначена для проверки и калибровки аттенюаторов.

Диапазон частот - от 1000 МГц до 16 600 МГц.

Погрешность образцового аттенюатора при измерении ослабления не более 80 дБ - не более ±1 дБ.

More info ...

Д1-24

Available:

2 pcs

Д1-24 установка для измерения ослабления предназначена для измерения модуля коэффициента передачи встроенных и отдельных аттенюаторов, пассивных и активных четырехполюсников в высокочастотных и сверхвысокочастотных трактах различной радиотехнической аппаратуры, в том числе в составе подвижных комплексов.

Диапазон рабочих частот - от 0,1 МГц до 37 500 МГц.

Пределы допускаемой абсолютной систематической погрешности - ±2,7 дБ.

More info ...
1
2
   View all 

LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

 

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

 

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

 

The company takes an active part in such procedures as electronic bidding, tender, auction.

 

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.