Equipment for maintenance checkup >> - the list of equipment for vehicle inspection >> equipment for inspection and auto service of the plant "GARO" >> brake testers STS
Mobile universal tester STS-13U-SP-24 is designed to monitor the efficiency of the service and parking brake systems and stability under braking PBX with an axle load of 13 tonnes.
Also this Brake Tester can be called: STS13USP24, STS 13U SP 24, STS-13USP24, STS-24 13USP, STS13 USP 24.
Brake stands STS-13U-SP-24 equipped with a heated room with a set of office furniture, office equipment and household appliances. Structurally, the stand consists of racks and floor supporting roller device.
Wheel diameter (bus) - from 520 to 1300 mm.
The inner / outer ends of the rollers - 800/2800 mm.
With the brake testers STS-13U-SP-24 is carried out measurement of the following parameters:
- brake system reaction time;
- total surface braking force;
- coefficient of uneven braking forces wheels on one axle;
- Compatibility rate units train;
- the relative difference between the axis of the wheel brake force;
- asynchronous time delay brake actuator units train.
Specifications stands STS-13U-SP-24:
Supply voltage - 380 V.
Supply frequency - 50 Hz.
Mode of operation of the stand - Intermittent.
Electrical power - 19 kW.
The maximum power measured maximum brake force for 10 - 55 kW.
Length of the flyover - 15 m
Overpass is for arrival and exit the car on the support rollers and attached on both sides of the platform to set the reference device.
Brake stands STS-13U-SP-24 are mobile and can be used both independently and as a basic module for transport companies, in technical control centers and service stations, provided that their electrical network is not connected to the networks of residential houses.
Management made a stand with a remote control that signals the computer via radio or on a PC keyboard.
Operating temperature range - from - 10 ° C to +35 ° C.
Brake stand STS-13U-SP-14, with delivery:
1. The support device.
3. Equipped office.
4. The weighing system.
5. Module 4WD.
6. Set the remote control.
7. Sensor measuring the pressure in the pneumatic actuator.
8. The force sensor on the control vehicle.
9. The Bridge (2 pcs.).
10. Underride guard (2 pcs.).
11. Set the PC - Optional consumer.
12. Tool set for checking the stand - Optional consumer.
Warranty period - 12 months from the date of sale to the consumer of the stand, but not more than 14 months from the date of shipment to the manufacturer. Guarantee period can be extended for another 12 months in case of a contract for service products.