Products catalog

SKT

DBSKT-220-1

Sine-cosine transformer DBSKT-220-1 (DBSKT2201, DBSKT 220 1, DBSKT220-1 DBSKT220 1 DBSKT-2201, DBSKT 2201)
Designed to work in a transformer circuit for remote transmission angle of the shaft, can be used as a sensor of angular position of the control;
Accuracy Class - 1.0, 2.0;
Electromagnetic asymmetry - no more than ± 12,5 ang., ± 20,0 ang.;
The ratio of minimum stress to the slope - not more than 15.0 ang., 20.0 ang..
More info ...

ДБСКТ-250-1Ш трансформатор малой мощности предназначен для работы в устройствах, собранных на полупроводниковых приборах в радиоэлектронной аппаратуре, аппаратуре средств связи и электронно-вычислительных машинах, а также в бытовой РЭА при питании от промышленной и специальной сети переменного тока напряжением 220 В с частотой 50 Гц.

More info ...

ДБСКТ-650-1Ш трансформатор малой мощности предназначен для работы в устройствах, собранных на полупроводниковых приборах в радиоэлектронной аппаратуре, аппаратуре средств связи и электронно-вычислительных машинах, а также в бытовой РЭА при питании от промышленной и специальной сети переменного тока напряжением 220 В с частотой 50 Гц.

More info ...

SKT-212-1D

Sine-cosine transformer SKT-212-1D (SKT2121D, SKT 212 1D, 1D, SKT212, SKT212 1D, SKT-2121D, 2121D RCP)
Designed to work in a transformer circuit for remote transmission angle of the shaft, can be used as a sensor of angular position of the control;
Accuracy Class - 1.0, 2.0;
Electromagnetic asymmetry - no more than ± 15,0 ang.;
The ratio of minimum stress to the slope - not more than 15.0 ang., 25.0 ang..
More info ...

SKT-212-1P

Sine-cosine transformer SKT-212-1P (SKT2121P, SKT 212 1P, SKT212-1P, 1P SKT212, SKT-2121P, 2121P CRT)
Designed to work in a transformer circuit for remote transmission angle of the shaft, can be used as a sensor of angular position of the control;
Accuracy Class - 1.0, 2.0;
Electromagnetic asymmetry - no more than ± 15,0 ang.;
The ratio of minimum stress to the slope - not more than 15.0 ang., 25.0 ang..
More info ...

SKT-220-1D

Sine-cosine transformer SKT-220-1D (SKT2201D, SKT 220 1D, 1D, SKT220, SKT220 1D, SKT-2201D, 2201D RCP)
Designed to work in a transformer circuit for remote transmission angle of the shaft, can be used as a sensor of angular position of the control;
Accuracy Class - 0.2, 0.35, 0.5;
Electromagnetic asymmetry - no more than ± 5,0 ang., ± 10,0 ang., ± 15,0 ang.;
The ratio of minimum stress to the slope - not more than 7.5 ang., 10.0 ang., 15.0 ang..
More info ...

SKT-220-1P

Sine-cosine transformer SKT-220-1P (SKT2201P, SKT 220 1P, SKT220-1P, 1P SKT220, SKT-2201P, 2201P CRT)
Designed to work in a transformer circuit for remote transmission angle of the shaft, can be used as a sensor of angular position of the control;
Accuracy Class - 0.2, 0.35, 0.5;
Electromagnetic asymmetry - no more than ± 5,0 ang., ± 10,0 ang., ± 15,0 ang.;
The ratio of minimum stress to the slope - not more than 7.5 ang., 10.0 ang., 15.0 ang..
More info ...

SKT-225-2D

Sine-cosine transformer SKT-225-2D (SKT2252D, SKT 225 2D, SKT225-2D, 2D SKT225, SKT-2252D, 2252D RCP)
Designed to work in a transformer circuit for remote transmission angle of the shaft, can be used as a sensor of angular position of the control;
Accuracy Class - 0.1, 0.2, 0.35;
Electromagnetic asymmetry - no more than ± 2,5 ang., ± 5,0 ang., ± 10,0 ang.;
The ratio of minimum stress to the slope - not more than 5.0 ang., 7.5 ang., 10.0 ang..
More info ...

SKT-225-2D8

Sine-cosine transformer SKT-225-2D8 (SKT2252D8, SKT 225 2D8, 2D8, SKT225, SKT225 2D8, SKT-2252D8, 2252D8 SKT)
Designed to work in a transformer circuit for remote transmission angle of the shaft, can be used as a sensor of angular position of the control;
Accuracy Class - 0.1, 0.2, 0.35;
Electromagnetic asymmetry - no more than ± 2,5 ang., ± 5,0 ang., ± 10,0 ang.;
The ratio of minimum stress to the slope - not more than 5.0 ang., 7.5 ang., 10.0 ang..
More info ...

SKT-225-2DF

Sine-cosine transformer SKT-225-2DF (SKT2252DF, SKT 225 2DF, SKT225-2DF, 2DF SKT225, SKT-2252DF, 2252DF CRT)
Designed to work in a transformer circuit for remote transmission angle of the shaft, can be used as a sensor of angular position of the control;
Accuracy Class - 0.1, 0.2, 0.35;
Electromagnetic asymmetry - no more than ± 3,5 ang., ± 7,0 ang., ± 10,0 ang.;
The ratio of minimum stress to the slope - not more than 5.0 ang., 7.5 ang., 10.0 ang..
More info ...
Sine-cosine transformer SKT-225-2P (SKT2252P, SKT 225 2P-2P SKT225, SKT225 2P SKT-2252P, 2252P CRT)
Designed to work in a transformer circuit for remote transmission angle of the shaft, can be used as a sensor of angular position of the control;
Accuracy Class - 0.1, 0.2, 0.35;
Electromagnetic asymmetry - no more than ± 2,5 ang., ± 5,0 ang., ± 10,0 ang.;
The ratio of minimum stress to the slope - not more than 5.0 ang., 7.5 ang., 10.0 ang..
More info ...

SKT-232B

Transformer SKT-232B rotating-pole open-frame (SKT232B, SKT-232-B, SKT 232 B, SKT 232B, SKT232 B, SKT232 B)
Represents four stretch wrapping machines;
Nominal voltage - 12V;
Input impedance idling - 800 ohms;
Turns Ratio - 0.58.
 
More info ...

SKT-232D

Transformer SKT-232D pole revolving, open-frame (SKT232D, SKT-232-D, SKT 232 D, SKT 232D, SKT232-D, SKT232 D)
Represents four stretch wrapping machines;
Nominal voltage - 36V;
Input impedance idling - 750 ohms;
Turns Ratio - 0.58.
More info ...

SKT-232D8

Transformer SKT-232D8 open-frame rotating pole (SKT232D8, SKT-232-D8,  SKT 232 D8, SKT 232D8, SKT232-D8,  SKT232 D8)
Represents four stretch wrapping machines;
Nominal voltage - 36V;
Input impedance idling - 750 ohms;
Turns Ratio - 0.58.
More info ...

SKT-232P

Transformer SKT-232P open-frame rotating pole (SKT232P, SKT-232-P, SKT 232 P, SKT 232P, SKT232-P,  SKT232 P)
Represents four stretch wrapping machines;
Nominal voltage - 36V;
Input impedance idling - 750 ohms;
Turns Ratio - 0.58.
More info ...

SKT-250

Transformer SKT-250 open-frame rotating pole (SKT250, SKT 250, ckt-250, ckt250, ckt 250)
Represents chetyrehobmotochnuyu machine;
Nominal voltage - 12V;
Input impedance idling - 1200 ohms;
Turns Ratio - 0.22.
More info ...

СКТ-265Д

Transformer SKT-265D pole revolving, open-frame (SKT265D, SKT-265-D, SKT 265 D, SKT 265D, SKT265-D, SKT265 D)
Represents four stretch wrapping machines;
Nominal voltage - 36V;
Input impedance idling - 800 ohms;
Turns Ratio - 1.
More info ...

SKT-265D8

Transformer SKT-265D8 open-frame rotating pole (SKT265D8, SKT-265-D8, SKT 265 D8, SKT 265D8, SKT265-D8, SKT265 D8)
Represents four winding machine;
Nominal voltage - 36V;
Input impedance idling - 800 ohms;
Turns Ratio - 0.22.
More info ...

SKT-265P

Transformer SKT-265P open-frame rotating pole (SKT265P, SKT-265-P, SKT 265 P, SKT 265P, SKT265-P, SKT265 P)
Represents four stretch wrapping machines;
Nominal voltage - 36V;
Input impedance of idling - 1600 ohms;
Turns Ratio - 1.
More info ...

SKT-432D

Transformer SKT-432D rotating multi (SKT432D, SKT-432-D, SKT 432 D, SKT 432D, SKT432-D, SKT432 D)
Is a three-winding or four stretch wrapping machines;
Nominal voltage - 36V;
Turns Ratio - 8.
More info ...

SKT-432P

Transformer SKT-432P rotating multi (SKT432P, SKT-432-P, SKT 432 P, SKT 432P, SKT432-P, SKT432 P)
Is a three-winding or four stretch wrapping machines;
Nominal voltage - 40V;
Turns Ratio - 28.
More info ...

SKT-6465D

Transformer SKT-6465D rotating multi (SKT6465D, SKT-6465-D, SKT 6465 D, SKT6465D, SKT6465-D, SKT6465 D)
Is a three-winding or four stretch wrapping machines;
Nominal voltage - 36V;
Turns Ratio - 8.5.
More info ...

SKT-6465P

Transformer SKT-6465P multi-rotating (SKT6465P, SKT-6465-P,   SKT 6465 P, SKT 6465P, SKT6465-P,  SKT6465P)
Is a three-winding or four stretch wrapping machines;
Nominal voltage - 36V;
Turns Ratio - 6.
More info ...
no-image

     Transformer sine-cosine SKT260-1 (CKT260-1) (SKT 260-1; SKT-260-1; skt260-1; skt 260-1; skt-260-1)
     Transformers SKT260-1 (CKT260-1) - frameless bipolar devices used for a transformer circuit Transmitting the rotation angle of the shaft can also be used as an angular position sensor in the control unit.
     Accuracy class of the device: 0.2.
     Following error: no more than ± 0,2 arc. minutes.
     The asymmetry of the zero positions of the rotor: ± 5,0 arc. minutes.
     Inequality transformation ratio: 5.0 arcmin. minutes.

More info ...

СКТ3-6465П трансформатор вращающийся синусно-косинусный многополюсный предназначенная для преобразования угла поворота в электрическое напряжение, амплитуда которого пропорциональна или является функцией синуса или косинуса угла или самым углом.

Число пар полюсов - 64.

Внешний диаметр корпуса - 65 мм.

More info ...

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.