Electrical measuring instruments >> calibrators, compartors, calibration rigs

N6-2 (h6-2, Н6-2) Calibrator H6-2 phase.

N6-2 (h6-2, Н6-2)

240 425 RUB
81 745 UAH

Online prices include VAT.

For order is possible effectively delivery of any quantity.
Calibrator N6-2 phase (N62, N6 2)
 
Calibrator N6-2 phase is intended to be used for regulation, repair and calibration phase meter and other electronic equipment for various purposes.
 
Technical characteristics of the instrument calibrators N6-2 phases:
 
Phase calibrator H6-2 - a desktop digital device, is the source of two sinusoidal signals with a calibrated value of the phase difference.
Designed for use in regulation, repair and calibration phase meter and other electronic equipment for various purposes.
Operation of the instrument calibrator N6-2 phase based on the principle of direct digital frequency synthesis (Direct Digital Synthesizers, DDS).
The generated signal is synthesized with a typical accuracy of digital systems.
The frequency, amplitude and phase of the signal at any given time are precisely known and controlled.
Provides control of the instrument calibrator N6-2 phase via the built-in RS-232.
The working range of output frequency - from 0,001 Hz to 100 MHz.
Step in the installation of the carrier frequency instrument calibrator N6-2 phases - from 0,001 Hz to 10 Hz.
The main error of the carrier frequency - less than 5 ∙ 10 -6.
The range of the phase shift unit calibrator N6-2 phases - from 0 º to 360 º.
Step in the installation phase shift - 0,01 º.
Acceptable basic error limit playback of the phase difference - no more than 0,005 º at frequencies up to 10 kHz, 0,01 º at frequencies up to 100kHz, 0,05 º at frequencies up to 10MHz and 0,1 º at frequencies up to 100MHz.
The maximum output level of the instrument calibrator H6-2 phase at 50 Ohm load - not less than 20mW.
Depth adjustment of output - 100 dB.
The main error adjust the output level of the instrument calibrator N6-2 phase - no more than 1 dB to 60 dB at the setting, no more than 2.5 dB for adjustment to 100 dB.
Operating conditions:
- Ambient temperature - from 5 º C to 40 ° C;
- Relative humidity - up to 90% at 30 ° C;
- Voltages instrument calibrator phase N6-2 network - 220V ± 22V, 50Hz ± 2Hz.
Weight of the device - no more than 5kg.
Overall dimensions calibrator N6-2 phases - 317h132h288mm.


Яндекс цитирования