Kilovoltmeter S196 electrostatic (S 196, S-196, c 196, c-196, c196)
Kilovoltmeter S196 electrostatic are designed to measure DC and AC in a wide range of frequencies in the circuit with one pole earthed, i.e. in grounded circuit.
Kilovoltmeter S196 electrostatic can measure the tension in incomplete circuit, i.e. in circuit with two live wires.
Kilovoltmeter S196 electrostatic is designed for operation at an ambient temperature of 10° to 35°C and relative humidity up to 80% at 25°C.
Range: 0-7,5 kV 0-15kV and 0-30 kV. Measurement range: from 27 to 100% of full scale range. Normal frequency: 50 Hz. Operating frequency range: AC from 20 Hz up to:
14 MHz – on the range of 0-7,5 kV;
8 MHz – on the range of 0-15kV;
2 MHz – on the range of 0-30 kV.
Acceptable basic accuracy: ± 1,0% of full scale value. Maximum permissible additional error caused by changes in ambient temperature of 20±5°C to any temperature between 10 and 35°C for every 10°C change in temperature is ± 1,0%.
Input capacity does not exceed 15 pF.
Self-resonant frequency: at least 100 MHz.
Response speed: less than 4s. Dielectric test voltage between the high voltage electrode and the housing connected to the power circuit of illuminator:
16kV – on the range 0-7,5 kV;
26kV - on the range 0-15kV;
45kV - on the range 0-30 kV;
2kV - between illuminator power circuit and the housing.
Insulation resistance of high-voltage electrode as to the housing is at least 104 MΩ at an ambient temperature of 20±5°C and 80% relative humidity.
Insulation resistance of the illuminator power circuit as to the housing at the same conditions is at least 40 MΩ.
Power supply of illuminator: AC 50 Hz with the voltage of 127V or 220V Dimensions: 280x645x239 mm.
Weight: not more than 11kg.
Devices are designed in compliance with the requirements of GOST 8711.
Photos C196 (С196)