Radiometric devices >> sets of measures

ДК2-70

130 839 RUB   |   32 710 UAH

DK2-70 set of measures a complex transfer coefficient used for the verification and calibration of network analyzers to mitigate the phase and gain.
Operating frequency range - from 0 GHz to 12 GHz.
Characteristic impedance - 50 Ohm.


More info ...

Kit measures the impedance and VSWR 2nd category

10 408 RUB   |   2 602 UAH

Kit measures VSWR and the impedance 2nd category is for checking meters and VSWR impedance with connectors type Sh (channel 7/3, 04 mm) according to GOST 13317-89.
Load - E9-155, E9-156.
Frequency range - from 0 GHz to 4 GHz.
Characteristic impedance - 50 Ohm.


More info ...

Н2-1 набор мер

available: 7 pieces
device image.

Н2-1 набор мер сопротивления образцовых предназначен для поверки измерителей иммитанса.

Номинальные значения сопротивления мер - от 1 Ом до 1 МОм.

Класс точности - 0,03%.


More info ...

Н3-1 набор мер

available: 2 pieces

Н3-1 набор мер предназначен для использования в качестве образцовых мер коэффициента отражения при поверке:

- панорамных измерителей коэффициента стоячей волны по напряжению;

- измерителей комплексных коэффициентов передачи.

Диапазон частот - 0,6 ГГц.

Канал - 3,5/1,52 мм.


More info ...

Н3-4 набор мер

available: 2 pieces

Н3-4 набор мер предназначен для использования в качестве образцовых мер коэффициента отражения при поверке:

- панорамных измерителей коэффициента стоячей волны по напряжению;

- измерителей комплексных коэффициентов передачи.

Диапазон частот - от 0 до 5 ГГц.

Канал - 16/4,6 мм.


More info ...

Coaxial SHF devices tract

Coaxial SHF devices tract are used to configure and checking gauges VSWR impedance and complex transmission coefficient, as well as for measuring the two-port.

Frequency - from 0 to 26,5 GHz.

Characteristic impedance - 50 Ohm to 75 Ohm.


More info ...

E9-78

7 000 RUB   |   2 200 UAH

E9-78 sets exemplary waveguide loads are designed for broadband matching output waveguide devices.
The kits - E9-78/1, E9-78/2, E9-78/3, E9-78/4, E9-78/5.
Frequency range - from 2,6 GHz to 3,94 GHz.
Cross section of rectangular waveguides - 72×34 mm.


More info ...

E9-79

7 000 RUB   |   2 200 UAH

E9-79 sets exemplary waveguide loads are designed for broadband matching output waveguide devices.
The kits - E9-79/1, E9-79/2, E9-79/3, E9-79/4, E9-79/5.
Frequency range - from 3,2 GHz to 4,8 GHz.
Cross section of rectangular waveguides - 58×25 mm.


More info ...

E9-80

7 000 RUB   |   2 200 UAH

E9-80 sets exemplary waveguide loads are designed for broadband matching output waveguide devices.
The kits - E9-80/1, E9-80/2, E9-80/3, E9-80/4, E9-80/5.
Frequency range - from 3,94 GHz to 5,64 GHz.
Cross section of rectangular waveguides - 48×24 mm.


More info ...

E9-81

available: 2 pieces
E9-81 delivery set.

E9-81 sets exemplary waveguide loads are designed for broadband matching output waveguide devices.
The kits - E9-81/1, E9-81/2, E9-81/3, E9-81/4, E9-81/5.
Frequency range - from 5,64 GHz to 8,24 GHz.
Cross section of rectangular waveguides - 35×15 mm.


More info ...

E9-82

7 000 RUB   |   2 200 UAH   |  available: 2 pieces
E9-82 device image.

E9-82 sets exemplary waveguide loads are designed for broadband matching output waveguide devices.
The kits - E9-82/1, E9-82/2, E9-82/3, E9-82/4, E9-82/5.
Frequency range - from 6,85 GHz to 9,98 GHz.
Cross section of rectangular waveguides - 28,5×12,6 mm.


More info ...

E9-83

7 000 RUB   |   2 200 UAH

E9-83 sets exemplary waveguide loads are designed for broadband matching output waveguide devices.
The kits - E9-83/1, E9-83/2, E9-83/3, E9-83/4, E9-83/5.
Frequency range - from 8,24 GHz to 12,05 GHz.
Cross section of rectangular waveguides - 23×10 mm.


More info ...

E9-84

7 000 RUB   |   2 200 UAH

E9-84 sets exemplary waveguide loads are designed for broadband matching output waveguide devices.
The kits - E9-84/1, E9-84/2, E9-84/3, E9-84/4, E9-84/5.
Frequency range - from 11,50 GHz to 16,70 GHz.
Cross section of rectangular waveguides - 17×8 mm.


More info ...

E9-85

7 000 RUB   |   2 200 UAH

E9-85 sets exemplary waveguide loads are designed for broadband matching output waveguide devices.
The kits - E9-85/1, E9-85/2, E9-85/3, E9-85/4, E9-85/5.
Frequency range - from 12,05 GHz to 17,44 GHz.
Cross section of rectangular waveguides - 16×8 mm.


More info ...

EK9-131

80 500 RUB   |   25 300 UAH

EK9-131 kit measures exemplary coaxial standing wave ratio and impedance apply:

- to check the devices for measuring the elements and circuits with distributed parameters;

- and for measuring the wave impedance.


More info ...

EK9-131A

80 500 RUB   |   25 300 UAH

EK9-131A kit measures exemplary coaxial standing wave ratio and impedance apply:

- to check the devices for measuring the elements and circuits with distributed parameters;

- and for measuring the wave impedance.


More info ...

ЭК9-140

available: 1 piece
ЭК9-140 set-up image with the opened lid.

EK9-140 set of measures SWR and impedance 1 discharge is used to configure the module and checking gauges transmission coefficient and reflection, impedance and complex transmission and reflection coefficient with connectors type III GOST 13317 and GOST RV 51914. And also for measuring the parameters of two-in of radio, antenna technology and microwave technology in the laboratory and workshop environments.
Frequency range - from 0 GHz to 4 GHz.
Characteristic impedance - 50 Ohm.


More info ...

EK9-145

99 999 RUB   |   40 000 UAH   |  available: 1 piece
EK9-145 set of measures image.
    EK9-145 set-up and complete the wave resistance of class I used to check the instrument for measuring the elements and circuits with distributed parameters with connector type III according to GOST 13317, GOST RV 51914. And also for the measurement of the wave and the impedance of radio in, antenna technology and microwave technology in the laboratory and workshop environments.
    Frequency range - from 4 GHz to 18 GHz.
    VSWR absorber downloads - not more than 1.15.

More info ...

EK9-180

available: 1 piece
EK9-180 set-up image with the opened lid.
    EK9-180 set-up coaxial impedance and VSWR 2nd class is used to configure and testing meters and VSWR impedance connectors with type II (channel 16/6, 95 mm) and VIII (Channel 16/4, 6 mm) in accordance with GOST 13317-89. And also for measuring the parameters of two-in of radio, antenna technology and microwave technology in the laboratory and workshop environments.
    Frequency range - from 0 GHz to 4 GHz.
    Characteristic impedance - 50 ohms, 75 ohms.

More info ...

ЭК9-181

92 931 RUB   |   23 233 UAH   |  available: 1 piece
A set of measures impedance model EK9-181.
A set of measures impedance model EK9-181 (EK9181, EC-9-181, EC 9181, EC-9181, EC 9181, EK9 181 EK9-181, EK9181, EC-9-181, EC 9181, EC-9181 , EC 9181, EK9 181 ЄK9-181, ЄK9181, ЄK-9-181, ЄK 9181, ЄK-9181, 9181 ЄK, ЄK9 181)
Designed for calibration of measuring parameters of microwave circuits and components, as well as automated measuring systems C9-11, C9-12 on the standing wave ratio, VSWR voltage and characteristic impedance in time domain;
Frequency range:
- 1GHz to 18GHz from - to measure with the connector type III;
- From 1 GHz to 26Ggts - for the measure with the connector type IX.

More info ...
Н3-4Н3-1Н2-1
Coaxial SHF devices tractE9-78E9-79
E9-80E9-81E9-82
E9-83E9-84E9-85
EK9-131EK9-131AEK9-145
EK9-180Kit measures the impedance and VSWRДК2-70
ЭК9-140ЭК9-181 


Яндекс цитирования