Products catalog

calibrators

Н4-12МН

Н4-12МН мера предназначена для ежедневной калибровки базового вольтметра-калибратора Н4-12 с целью обеспечения абсолютной точности, которая определяется точностью меры.

Напряжение меры - не более 10 В.

Потребляемая мощность - 10 В∙А.

More info ...

Н4-16

Н4-16 калибратор многофункциональный предназначен для реализации режимов калибратора постоянного и переменного напряжения, тока и декадного ряда сопротивлений.

Диапазон рабочих напряжений - не более 200 В.

Диапазон рабочих токов - не более 2 A.

More info ...

Н4-2 калибратор

Available:

2 pcs

Н4-2 калибратор предназначен для воспроизведения напряжения и силы постоянного тока с высокой точностью в широком динамическом диапазоне.

Выходная мощность - не более 130 Вт.

Высокое быстродействие на всех пределах - не более 1 с.

Широкий динамический диапазон воспроизведения - от 0,1 мкВ до 1000 В; от 1 нА до 2 А.

More info ...

Н4-3 калибратор

Available:

2 pcs

Н4-3 калибратор постоянного напряжения однодекадный предназначен для поверки вольтметров, аналого-цифровых преобразователей, делителей и других устройств наивысшей точности, а также для расширения диапазона образцовых мер напряжения и электродвижущей силы.

Выходное сопротивление на одну ступень декады - 220±2 Ом.

Потребляемая мощность - 10 В·А.

More info ...
Calibrator N4-3/1 (N43/1, N4 3/1)
Designed to determine the linearity of the basic limits of voltmeters, analog-digital converters, dividers, etc., as well as to expand the range of unambiguous measures of voltage and voltage.
More info ...

Н4-6

Н4-6 калибратор переменного напряжения предназначенный для поверки, калибровки и исследований широкой номенклатуры приборов и устройств, как в составе автоматизированных систем (с приборными интерфейсами RS-232C и IEEE 488), так и автономно.

Воспроизведение напряжений постоянного тока - до ±1000 В.

Воспроизведение напряжений переменного тока синусоидальной формы:

- в диапазоне от 0,1 Гц до 20 кГц - до 500 В;

- в диапазоне от 0,1 Гц до 10 кГц - до 700 В.

Воспроизведение силы постоянного тока - до ±10 А.

Воспроизведение тока синусоидальной формы:

- в диапазоне частот от 0,1 Гц до 10 кГц - до 2 А;

- в диапазоне частот от 0,1 Гц до 5 кГц - до 10 А.

Воспроизведение сопротивлений постоянному току в декадных точках - от 10 Ом до 10 МОм.

More info ...

Н4-7

Н4-7 калибратор предназначенный для поверки, калибровки и исследований широкой номенклатуры приборов и устройств, как в составе автоматизированных систем, так и автономно.

Напряжение постоянного тока - от 0,1 мВ до 1000 В.

Напряжение переменного - от 0,1 мВ до 700 В.

Сила постоянного и переменного тока - от 0,1 нА до 30 A.

More info ...

Calibrator N5-3 AC (N53, N5 3)
Enables playback of the AC voltage sine wave over a wide frequency range and is designed for testing and calibrating AC voltmeters.
Playing an AC voltage of 3.5 V to 100mkV in the frequency range 10Hz-50MHz with an accuracy of 0.2% -1.3%.
Playing DC voltage from 3.5 V to 100mkV with an error of 0.07% -0.2%.

More info ...

Н5-5

Н5-5 калибратор переменного напряжения предназначен для калибровки и поверки электронных вольтметров, измерителей уровня и мощности, а также может использоваться для испытаний широкого круга других СИ: ступенчатых аттенюаторов, анализаторов спектра, частотомеров и пр.

Диапазон частот воспроизводимых среднеквадратических значений (СКЗ) напряжения переменного тока - от 10 Гц до 2 ГГц.

Диапазон воспроизведения СКЗ напряжения переменного тока - от 3 мкВ до 3 В.

More info ...

Calibrator N6-2 phase (N62, N6 2)
     Designed for use in regulation, repair and calibration phase meter and other electronic equipment for various purposes.
     The working range of output frequency, at least 1 Hz - 100 MHz
     Step in the installation of the carrier frequency of 0.001 Hz to 10 Hz
     The main error of the carrier frequency of not more than 3.10 -6
     The range of the phase shift of the calibrator from 0 to 360 °
     Step in the installation phase shift of 0.01
     Acceptable basic error limit reproduction of the phase difference of not more than 0.01 at frequencies up to 100kHz, 0.02 for frequencies up to 1MHz, 0.03 for frequencies up to 10MHz and 0.5 for frequencies up to 100MHz.

More info ...
1
2
3
4
5
   View all 

LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

 

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

 

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

 

The company takes an active part in such procedures as electronic bidding, tender, auction.

 

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.