Electrical measuring instruments >> calibrators, compartors, calibration rigs

UPAV-2M

available:
1 piece
For order is possible effectively delivery of any quantity.
Unit UPAV-2M portable on checking ammeters and voltmeters AC and DC (UPAV2M, UPAV 2 M, UPAV 2-M, UPAV 2M)
 
Unit UPAV-2M portable on checking ammeters and voltmeters AC and DC designed for calibration of ammeters and voltmeters AC and DC, 50 Hz is almost sinusoidal and DC millivoltmeter classes 1.0, 1.5, 2.5.
 
Technical characteristics of the devices installed, portable Unit UPAV-2M on checking of ammeters and voltmeters AC and DC:
 
Normal conditions of installation are:
- Ambient temperature - 20 º C ± 5 ° C;
- Relative humidity - 65% ± 15%;
Unit UPAV-2M portable on checking ammeters and voltmeters AC and DC performed in a portable version that allows verification devices in place of their operation;
The unit provides calibration of ammeters and voltmeters AC and DC and DC millivoltmeter with the following upper limits:
a) DC ammeters - from 0.5 A to 10A;
b) AC ammeters - from 0.5 A to 100 A;
c) a DC voltmeter - from 3V to 600V;
d) AC Voltmeter - from 3mV to 600mV;
e) millivoltmeters DC - from 15mV to 3000mV;
When checking the device Unit UPAV-2M portable calibration of ammeters and voltmeters AC and DC ammeters AC power output does not exceed the values ​​given in Table 1;
At checking ammeters DC power output not exceeding 20W at currents up to 10A;
 
Table 1: When checking ammeters AC power output does not exceed the values ​​given in this table
 
Current in A
0.5 A
1.0 A
2.5 A
5A
10A
25A
50A
100A
Output in Watts
6W
10W
12W
50W
50W
50W
75W
100W
 
Checking the installation of a portable device for calibration of ammeters and voltmeters AC and DC Unit UPAV-2M is provided at the following current consumption:
- 100mA - for checking voltmeters up to 600 V;
- 150mA - for checking voltmeters up to 300V;
- 250mA - for checking voltmeters up to 150V;
- 20mA - if verification millivoltmeter DC to 3000mV;
Adjusting device installation Unit UPAV-2M portable on checking ammeters and voltmeters AC and DC make it possible to control the value of voltage and current in DC and AC smoothness is not worse than 0.2% of full scale instruments under verification;
The unit provides a variable component in DC no more than 3% of full scale value instruments under verification at the rated current up to 250mA for voltmeters and ammeters for 10A;
Portable Unit UPAV-2M on checking of ammeters and voltmeters AC and DC powered from AC 220V 5% 220 10% 50Hz ± 1Hz;
Power consumption - less than 100 watts;
Weight block device installation, portable Unit UPAV-2M on checking of ammeters and voltmeters AC and DC:
- The measuring unit current - 24kg;
- Voltage measuring unit - 20kg;
- M2007 instrument in its case - 4kg;
Dimensions of the elements of the device installation falling-2M portable calibration of ammeters and voltmeters AC and DC:
- The measuring unit current - 545h365h200mm;
- Voltage measuring unit - 545h365h200mm;
- M2007 instrument in its case - 225h330h140mm;
The manufacturer guarantees the quality of the instrument Unit UPAV-2M portable calibration of ammeters and voltmeters AC and DC technical requirements specifications subject to user terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.

Photos: UPAV-2M

UPAV-2M block image voltage.
UPAV-2M block image voltage.
UPAV-2M block image current.
UPAV-2M block image current.
UPAV-2M device image.
UPAV-2M device image.
UPAV-2M front view.
UPAV-2M front view.
UPAV-2M side view.
UPAV-2M side view.
UPAV-2M rear view.
UPAV-2M rear view.
UPAV-2M overhead view.
UPAV-2M overhead view.
UPAV-2M bottom view.
UPAV-2M bottom view.


Яндекс цитирования