Electrical measuring instruments >> calibrators, compartors, calibration rigs

Y300 (У300)

36 999 RUB
14 799 UAH
available:
7 pieces

Online prices include VAT.

For order is possible effectively delivery of any quantity.
Aggregate Y300 (Y-300, Y300)
Designed for AC and DC ammeters and voltmeters verification in a way of comparison of verificated devices with readings of exemplary devices in accuracy classes of 0.2 and less.

Nominal value of DC output voltage: 0.15V-1000V; current 0.1A-50A
Nominal value of AC output voltage: 0.5V-1000V; current 0.1A-300A
 
Aggregate Y300 is designed for AC and DC ammeters and voltmeters verification in a way of comparison of verificated devices with readings of exemplary devices in accuracy classes of 0.2 and less.
Aggregate Y300 is designed to operate in temperature range of 10 to 35 ° C (with relative humidity up to 80%, at ambient temperature of 25 ° C)
Aggregate Y300, designed for export to countries with tropical climates, should work in air-conditioned rooms with mentioned above temperature ranges, and should be marked asY300T4.1
Technical characteristics
Nominal value of output voltage, currents and variable effective component value correspond to values ​​shown in table.
Maximum value of each voltage regulation at rated load exceeds value shown in table, for not less than 5%. 
 
Parameters name
 Measured ranges:
Low-voltageblock
High-voltageblock
Nominal value of outputDC voltage, V
0.15V
1V
1V
2V
3V
4V
100V
350V
1000V
Current, А
0.2А
50А
30А
20А
10А
0.2А
0.1А
The components variable  value of the output dc voltage, mV max
    -
30
30
60
90
120
1000
3500
10000
Nominal value of outputAC voltage, V
0.5V
1.5V
3V
6V
9V
12V
100V
350V
1000V
Current, А
300А
50А
50А
30А
20А
10А
0.2А
0.1А
 
Aggregates power is consumed  by AC voltage 220V, with frequency 50Hz. Aggregate Y300 can be powered by AC voltage 220 ± 22V, in high-frequency up to 500 Hz. Total Harmonic Distortion of  output alternating voltages does not exceed 2%.
   
Output voltage changes caused by changes in voltage supply ± 10% from nominal value, do not exceed ± 1% of final value limit. Y300 Aggregates power consumption does not exceed 750VA.
Relay semiconductor high-power block anti overload protection is used in aggregates Y300 . Insulation between electrical circuits and the case installation can withstand for 1 minute without breakdown action of  test voltage and sinusoidal frequency of 50 Hz:
1.5 kV - for electrically connected between all contacts of mounting pad block switching unit;
3 kV - for electrically connected between output clamps "Exemplary" and "Verifiable" (switch "Power Supply" should be set to "High Voltage").  
Devices of smooth voltage output adjustment provide smooth, necessary for using of exemplary device class 0.2.
Aggregate Y300 is equipped with remote divider which division error coefficient does not exceed ± 20%.
Continuous operation time without turning off is not less than 8 hours. Aggregate allows continuous operation at fixed position in verifying control for not more than 4 hours. In mechanical influences resistance aggregate Y300 belongs to ordinary, according to GOST 1845 - 59. Dimensions do not exceeding 520x1040x720 mm, with a removable table - not more than 980x1040x720 mm. Weight without package - not less than 200 kg.

Photos: Y300 (У300)

Y300 (У300) aggregate image.
Y300 (У300) aggregate image.
Y300 (У300) front view.
Y300 (У300) front view.
Y300 (У300) side view.
Y300 (У300) side view.
Y300 (У300) rear view.
Y300 (У300) rear view.
Y300 (У300) side view.
Y300 (У300) side view.


Яндекс цитирования