Oscilloscope S1-117 (S1 117, S1117, c1-117, c1 117, c1117)
Desined to study the shape of the electrical signals by visual observation and measurement of amplitude and time parameters.
The rise time of 35 ns HRP
MV/del-5 coefficient of variation of 0.1 V / div to 50 V / div with an external divider 1:10
The bandwidth of 0-10 MHz, 0-100 kHz range 0.1-0.5 mV / div
Error of 4%
Oscilloscope S1-117 is designed to study the form of electrical signals by visual observation and measurement of amplitude and time parameters on a scale of CRT, as well as digitally (for C1-117/1) to display the results of the measurements and dimensions of the measured parameters in the LED display. High sensitivity (0.1 mV / div). Sync TV - signal.
A wide range of connecting devices. Universal compact two-channel oscilloscope S1-117 study provide a wide range of signal amplitudes from 400 mV to 300 V with a frequency of 15 MHz. High sensitivity (0.1 mV / div.) Allows the use of radio equipment in, computing, electronics, medical technology, nuclear physics.
A TV-Sync makes it easy to repair the TV and video devices. In devices Oscilloscope S1-117 has a digital display of measurement results - measurement of amplitude and time parameters of periodic signals of complex shape, the combined power - work on AC 220 V, 50, 400 Hz, and the DC voltage of 27 V, the possibility of rapid connect the oscilloscope to the test input device - a wide range of connecting devices. Possible to operate the device Oscilloscope S1-117 is permanent structures.
Number of Channels 2.
Effective screen, mm 60x80.
Accelerating potential, kV, 3.
The vertical deviation (channels A and B) the sensitivity of the steps of 0.1 mV / div. to 5 V / div, respectively, the series of numbers 1,2,5 (15 steps) and smoothly between the levels of 0.1 × 10 -3 ... 5
Bandwidth, MHz 0 ... 15
rise time of HRP: the rejection of 1 mV / div. and more, no more, 23 ns at a deviation of 0.1 ... 0.5 mV / div, no more, 3.5 ms
Input impedance direct input 1 MW in parallel with, not more, 35 pF with 1:10 divider 1 MW in parallel with, at most, 17 pF Maximum input voltage (AC + DC), V: 300 on the closed entrance to the open input 100 for indoor or outdoor entrance with 1:10 divider 300
Bias error coefficients,% under normal conditions of ± 4 to ± 6 operating conditions, the digital error measuring amplitude ... 2% 3
Sweep steps accordingly set series of numbers 1, 2, 5 (19 steps) and smoothly between the steps. There is a 10-fold stretching sweep, s / div 0.5 × 10 -6 ... 0.5
Error,%: in normal conditions ± 4 6 ± operating conditions.
The error included stretch,% ± in normal operating conditions in 5 ± 7,5.
Digital measurement error waveform% 1 ... 2.
Synchronization Internal: harmonic signals 10Hz-15 × 10 6 Hz pulse signals with an image size of more than 0.8 cases, the duration, from 0.06 × 10 -6 -1
External synchronization: harmonic signals, 10 Hz ... 15x10 6 pulse signals when the signal amplitude from 0.5 to 5, a duration from 0.06 × 10 -6 ... 1
Rectangular pulses, V / 0.6 kHz / 1
The error of the amplitude and frequency under normal circumstances, no more than,% ± 1.
Power Supply: AC, V / Hz 220/50, 220/400 of the source voltage, V 27.
The error of the amplitude and frequency under normal circumstances, no more than,% ± 1 Power: AC, W 50 DC power supply, 45W.
Overall dimensions 273x180h465.
Weight, not more than 10 kg.
Operating temperature range, ° C from -10 to 40.
|Sales departments LLC "Zapadpribor"
|1008 RUB||in stock:||4195 RUB||in stock:|
|370 UAH||5781 pieces||1145 UAH||20 pieces|
|1328 RUB||in stock:||4195 RUB||in stock:|
|487 UAH||2640 pieces||1145 UAH||23 pieces|
|1014 RUB||in stock:||5000 RUB||in stock:|
|372 UAH||2784 pieces||1250 UAH||15 pieces|
|2213 RUB||in stock:||5680 RUB||in stock:|
|487 UAH||1635 pieces||1420 UAH||18 pieces|
|1109 RUB||in stock:||5380 RUB||in stock:|
|394 UAH||3143 pieces||1345 UAH||21 pieces|
Built-in printer and a keyboard, memory, transfer data to a computer
Wheatstone bridge, resistance box measure, the resistance coils:
Attention! Delivery of all instruments, which are listed on the site, is on the whole territory of the following countries: Russia, Ukraine, Belarus, Kazakhstan and other CIS countries.
According to Russia, there is an established system of delivery to cities: Moscow, St. Petersburg, Surgut, Nizhnevartovsk, Omsk, Perm, Ufa, Norilsk, Chelyabinsk, Novokuznetsk, Cherepovets, Almetyevsk, Volgograd, Lipetsk, Magnitogorsk, Togliatti, Kogalym Kstovo New Urengoy Nizhnekamsk, Nefteyugansk, Nizhny Tagil, Khanty-Mansiysk, Yekaterinburg, Samara, Kaliningrad, Nadym, Noyabrsk, Vyksa, Nizhny Novgorod, Kaluga, Novosibirsk, Rostov-on-Don, Upper Pyshma, Krasnoyarsk, Kazan, Naberezhnye Chelny, Murmansk, Vsevolozhsk Yaroslavl, Kemerovo, Ryazan, Saratov, Tula, Usinsk, Orenburg, Novotroitsk, Krasnodar, Ulyanovsk, Izhevsk, Irkutsk, Tyumen, Voronezh, Cheboksary, Neftekamsk, Novgorod, Tver, Astrakhan, Novomoskovsk, Tomsk, Prokopyevsk, Penza, Urai, Pervouralsk , Belgorod, Kursk, Taganrog, Vladimir, Neftegorsk, Kirov, Bryansk, Smolensk, Saransk, Ulan-Ude, Vladivostok, Vorkuta, Podolsk, Krasnogorsk, Novouralsk, Novorossiysk, Khabarovsk, Zheleznogorsk, Kostroma, Zelenogorsk, Tambov, Stavropol, Svetogorsk, Zhigulevsk , Arkhangelsk and other cities of the Russian Federation.
Ukraine has a well-established on the delivery system in the cities: Kiev, Kharkov, Dnepropetrovsk, Odessa, Donetsk, Lviv, Kiev, Nikolaev, Lugansk, Vinnitsa, Simferopol, Kherson, Poltava, Chernihiv, Cherkasy, Sumy, Zhytomyr, Kirovohrad, Khmelnytsky, Rivne, Chernivtsi, Ternopil, Ivano-Frankivsk, Lutsk, Uzhgorod and other cities of Ukraine.
On Belarus there organized system of delivery to cities: Minsk, Vitebsk, Mogilev, Gomel, Mozyr, Brest, Lida, Pinsk, Orsha, Polotsk, Grodno, Zhodino Molodechno and other cities of Belarus.
In Kazakhstan there is an established system of delivery to cities of Astana, Almaty, Ekibastuz, Pavlodar, Aktobe, Karaganda, Uralsk, Aktau, Atyrau, Arkalyk, Balkhash, Zhezkazgan Kokshetau Kostanai, Taraz, Shymkent, Kyzylorda, Lisakovsk, Shakhtinsk, Petropavlovsk, reader, Ore, Families, Taldykorgan, Temirtau, Ust-Kamenogorsk and other cities of Kazakhstan.
Ongoing delivery of devices to such countries: Azerbaijan (Baku), Armenia (Yerevan), Kyrgyzstan (Bishkek), Moldova (Chisinau), Tajikistan (Dushanbe), Turkmenistan (Ashgabat), Uzbekistan (Tashkent), Lithuania (Vilnius), Latvia (Riga ), Estonia (Tallinn), Georgia (Tbilisi).
LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.
The site includes a special offer «buy at the best price» - if other Internet resources in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.
In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.
LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.
Plant «META» - is the most reliable manufacturer of equipment for inspection. Brake stand STM produced on this plant.
Manufacturer TM «Infrakar» - a manufacturer of multifunction devices gas analyzer and smoke meter.
If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand.
You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.
Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.
While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.
Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS. We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.
If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.
We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.
Upon request, each measuring device is provided metrological certification or verification. Our staff can represent your interests in such organizations as the metrological Rostest (Rosstandart), State Standard, Derzhspozhiv standard (Derzhspozhivstandart), TSLIT, OGMetr.
Sometimes customers can enter our company name wrong - for example, zapadprybor, zapadprylad, zapadprіbor, zapadprilad, zahіdpribor, zahіdprіbor, zahidpribor, zahidprilad, zahidprіbor, zahidprybor, zahidprylad. That's right - Zapadpribor or zahіdprilad.
LLC "Zapadpribor" is the supplier of ammeters, voltmeters, power meters, frequency meters, phase meters, shunts and other devices such manufacturers of measuring equipment, such as: PO " Elektrotochpribor " (M2044, M2051), Omsk, OAO "Instrument-Making Plant "Vibrator" (M1611, Ts1611), St. Petersburg, JSC "Krasnodar ZIP " (E365, E377, E378), LLC " ZIP Partner" (Ts301 , Ts302 , Ts300) and "ZIP" Yurimov"(M381, C33), Krasnodar, OAO "VZEP" ("Vitebsk factory of electrical appliances") (E8030, E8021), Vitebsk, OAO "Electropribor" (M42300, M42301, M42303, M42304, M42305, M42306), Cheboksary, JSC "Elektroizmeritel" (Ts4342, Ts4352, Ts4353 ) Zhitomir, PJSC "Uman factory "Megger" (F4102, F4103, F4104, M4100), Uman.
© 2005 - 2016 LLC "Zapadpribor".
All rights reserved.