Store R4041M resistance measurement (R 4041M, R-4041M, p4041m, p 4041m, p-4041m)
It is intended for use as a multi-valued measure of electrical resistance (MMES) in DC.
Nominal impedance 107 Ohm
Rated and maximum voltage at the store 3kV
Number of decades 1
Accuracy class 0.05
Store R4041M resistance measurement designed for use as a multi-valued measure of electrical resistance (MMES) in DC
Ambient air temperature of 10 to 40 ° C
relative humidity from 25 to 80% in the working temperature range;
pressure 86-106 kPa (650-800 mm Hg).
- UHL, category 4.2. GOST 15150 - 69.
Shops R4041M are recoverable single-channel, monofunctional products.
Main parameters and codes OKP stores are listed in Table. 1.
The permissible deviation of the actual value of the resistance of the rated stores R4041M not exceed ± 0,005% under the following standard conditions:
ambient temperature (20 ± 1) ° C;
relative humidity (60 ± 20)%;
atmospheric pressure (100 ± 4) kPa (750 ± 30) mm Hg;
current is constant;
voltage - not the rated (Table 1).
The limit of additional error shops R4041M caused by changes in ambient temperature between the upper (lower) limit the range of normal conditions of use and by some point in the related field of application of the operating temperature corresponding to the maximum change in resistance is equal to ± 0,05%.
Mean time between failures stores R4041M in normal conditions of use not less than 6000 hours average lifetime of at least 10 years of age.