Discount up to 50% on the panel devices.

Electrical measuring instruments >> measures and boxes >> resistance


13 999 RUB
6 720 UAH
12 pieces

Online prices include VAT.

It is possible effectively delivery of any quantity.

Coil resistance measurement R4033 (R 4033, R-4033, p4033, p 4033, p-4033)
It is intended for use as a single-valued measures electrical resistance (OMES) in DC.
Nominal impedance 108 Ohm
Accuracy class 0,005
A measure of the resistance measuring R4033

Product Overview

R4013 measuring coil resistance are designed for use as a single-valued measures electrical resistance (OMES) in DC.
Operating conditions:
ambient temperature (20 ± 5) ° C;
relative humidity from 25 to 80% in the working temperature range;
84-106.7 kPa atmospheric pressure (630-800 mm Hg).
Type of climate UHL 4.1 per GOST 15150-69.
Coil resistance measurement R4033 belongs to the non-renewable, one-channel, monofunctional products.

Technical characteristics

The main parameters of the coils R4033 and OKP codes are given in the table below. The permissible deviation of the actual value of the coil resistance of the nominal value of R4033 for initial verification (at release from the factory) is not greater than ± 0,01% under the following standard conditions:
ambient temperature (20 ± 0,5) ° C;
relative humidity (25-80)%;
atmospheric pressure 64-106,7 kPa (630-800 mm. mercury);
current is constant;
voltage is higher than the nominal (stated in the table).
Restricted to change the coil resistance R4033 per year (instability) does not exceed ± 0,005%. The limit of additional error R4033 coil caused by changes in ambient temperature between the upper (lower) limit the range of normal conditions of use and by some point in the related field of application of the operating temperature corresponding to the maximum change in resistance, Kmax is equal to ± 0,005%. The resistance value (Rt) coil in ohms at
t ° C operating temperature range is determined by the formula.
The limit of additional error R4033 coil as a percentage of its nominal voltage changes from nominal to any value that does not exceed the maximum, under normal conditions of use and steady thermal state does not exceed ± 0,005.
Average, MTBF coil R4033 least 30,000 hours in the working conditions of use. Average life of coils at least 10 years of age. For information about the content of precious metals of silver: 0.34 g


Parameter name
Accuracy class
Rated resistance in Ohm
August 10
Coil voltage
The insulation resistance between current-carrying coil circuit and the chassis, Ohm, not less
1.10 13
Dielectric strength test voltage, kV
Temperature resistance coefficient, K -1, more
15.10 -6
Overall dimensions, mm
Mass, kg
OKP code
42 2512 0013 02

Photos Р4033

R4033 (P4033) device image.
R4033 (P4033) device image.
R4033 (P4033) in operation.
R4033 (P4033) in operation.
R4033 (P4033) front view.
R4033 (P4033) front view.
R4033 (P4033) overhead view.
R4033 (P4033) overhead view.
R4033 (P4033) bottom view.
R4033 (P4033) bottom view.