Deadweight pressure gauge MP-60
Also, this device can be called: MP60, MP 60.
Deadweight gauges MP-60 - widely used for benchmark results in the field of heat engineering. With their help, you can easily find a high pressure liquid or gas.
At the heart of robots instrument MP-60 is the principle of "non-compacted piston" - the total weight of the piston weighbridge, and installed on the balances of goods measured by the pressure acting on the lower end of the piston.
Scope MP-60 standard for verification and calibration of measuring the excess pressure transducers, model and technical gauges and other measuring tools, as well as the deadweight tester lower accuracy class in the laboratory.
Accuracy class MP-60 - 0.01, 0.02, 0.05 (Table 1).
Upper limit of measurement (playback) - 6 MPa (60 kgf / cm 2).
The lower limit of measurement (playback) - 0.02 MPa (0.2 kgf / cm 2).
The piston stroke length - at least 10 mm.
Nominal area of the piston - 0.5 cm 2.
Maximum deviation from the nominal value of the reduced area of the piston - 1%.
Nominal value of the mass of the piston with a load device - no more than 0,4 x0, 98 kg.
Working fluid - transformer oil.
Working fluid volume - no more than 250 cm 3.
Dimensions - 400h500h300 mm.
Weight without cargo - not more than 25 kg.
Ambient - 15 º C to 30 º C.
Relative humidity - 60 ± 20%.
Atmospheric pressure - from 84 kPa to 106.7 kPa.
MTBF - 40,000 hours
Average life - 8 years.
The manufacturer provides a guarantee the compliance of the deadweight gauge MP-60 all the technical requirements provided the customer terms and conditions of use, storage and transportation, installed documentation manuals.