Electrical measuring instruments >> combination devices

KT-2 (КТ-2) Digital clamp meter CT-2.

KT-2 (КТ-2)

6 038 RUB
1 638 UAH

Online prices include VAT.

For order is possible effectively delivery of any quantity.
Digital clamp meter KT-2 (kt2, kt 2)
 
Digital clamp meter KT-2 are designed for short-term measure the strength of AC sinusoidal frequency of 50 Hz without breaking the circuit with rated voltage up to 650V.
 
Technical characteristics of the instrument digital clamp meter KT-2:
 
The device is intended for short-term measure the strength of the AC sinusoidal frequency of 50 Hz without breaking the circuit with rated voltage up to 650V.
The window size of the magnetic device digital clamp meter KT-2 provides coverage of the conductor with an outer diameter of 35mm or less than the tire size 20h50mm.
As a reading device in the device used LED low tokopotrebleniem.
The bright glow and high contrast display device digital clamp meter KT-2 (digit height 14 mm) provide high-quality display of measured values ​​in conditions with poor ambient light.
This model has a function of holding statements, which allows measurements in a remote place, where it is not possible to consider directly the reading at the time of measurement.
Location of controls provides the necessary switching modes with one hand.
Power supply digital clamp meter KT-2 is carried out on four elements of the type A316.
The main technical characteristics of the device are shown in Table 1.
 
Table 1 Main technical characteristics of the instrument digital clamp meter KT-2
 
Alternating current 50 Hz
The range of the instrument measuring the digital clamp meter KT-2
1A-500A
Range of measurement
200A, 500A
The error of the instrument digital clamp meter KT-2
5.7
AC voltage
The range of the instrument measuring the digital clamp meter KT-2
10V-500V
Range of measurement
200V, 500V
The error of the instrument digital clamp meter KT-2
5.7
DC Resistance
The range of the instrument measuring the digital clamp meter KT-2
10 ohms, 200 ohms
Range of measurement
200 Ohm
The error of the instrument digital clamp meter KT-2
0.6
The performance characteristics
Current consumption from batteries
less than 30mA
Operating temperature range instrument digital clamp meter KT-2
-10 º C-+40 ° C
Weight (without batteries)
0.5 kg
Overall dimensions of the instrument digital clamp meter KT-2
256h110h44mm


Яндекс цитирования