G113.1 primary converter (G -113.1, G 113.1)
G113.1 primary converter included tachometer K1803.1 device designed for remote measurements of the speed and the direction of rotation of shaft diameters from 20mm to 1125mm main marine engines.
- 1.0 - when the reversing rollers;
- 1.0 - for units with zero within the range of measurement;
- 1.5 - for units with zero left.
Technical characteristics of the instrument G113.1 primary converter:
G113.1 primary converter has obscheklimaticheskoe performance of "0";
Measurement range of the instrument and tachometer K1803.1 number of rotor teeth, depending on the diameter of the shaft are shown in Table. 1;
Standardized output signals to analog output proportional to the frequency K1803.1 tachometer shaft rotation;
The limits of voltage changes the output signals:
- From 0V to +10 V - when working with non-reversible shaft tachometer;
- From-10V to +10 V - working tachometer with reversing rollers;
Voltage output tachometer K1803.1 corresponding end range value - 10V
Load resistance - from 2 ohms to 2 megohms;
Power supply transformer primary G113.1 is AC 220V, 50 Hz or 400 Hz by a factor of harmonics up to 10%;
Power consumption is less than 20 V ∙ A;
Table 1: Range and number of rotor teeth, depending on the diameter of the shaft
Note. Special order can be made with other tachometers reading range, including marked with an asterisk.
Overall dimensions converter G113.1 primary - 150x190x130mm, weight 2.4 kg;
G113.1 primary converter GOST.