TRS 5009 TRS 5009 A device for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009.
4.9 63
A device for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 (TRS5009, TRS 5009)
Designed to measure the hardness of metals and alloys by the method of Rockwell and Superficial Rockwell;
Range of hardness measurements - 20HRA-88HRA, 20HRB-100HRB, 20HRC-70HRC;
The maximum permissible errors of test loads - ± 0,5%, ± 1,0%.
Laboratory equipment
TRS 5009 A device for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009.

Price:

on request

 

Product information updated 09 March 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Product information updated 09 March 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Technical characteristics

A device for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 (TRS5009, TRS 5009)
 
A device for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 is designed to measure the hardness of metals and alloys by the method of Rockwell and Superficial Rockwell.
The device is designed for use in workshops and laboratories of engineering and metallurgical enterprises, as well as in laboratories of research institutes with an ambient temperature of +10 º C to +35 º C, relative humidity from 50% to 80%.
The instrument unit for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 is an improved analog device TRS 5009-01.
 
Technical characteristics of the devices devices for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009:
 
Range of hardness measurements - 20HRA-88HRA, 20HRB-100HRB, 20HRC-70HRC;
The test load device unit for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009, pre - 98.07 N;
Test loads, general, method Rockwell and Superficial Rockwell - 588.4 N, 980.7 N, 1471N;
The maximum permissible errors of test loads device device for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 - ± 0,5%, ± 1,0%;
Measurement range of Rockwell hardness according to the values ​​listed in Table 1;
 
Table 1: Range of hardness instrument instrument for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 Rockwell
 
Hardness scale
Load, N
View of the indenter
Measuring range, HR
NRA
588.4 N
Diamond cone
from 20 to 88
NRB
980.7 N
Ball Ø1, 588mm
20 to 100
HRC
1471N
Diamond cone
20 to 70
 
Range of hardness measurement device for measuring the hardness of the device according to the method Rockwell and Superficial Rockwell TRS 5009 on Superficial Rockwell scales in accordance with the values ​​specified in Table 2;
 
Table 2 Range of hardness measurement instrument instrument for measuring the hardness method Rockwell and Superficial Rockwell scales for TRS 5009 Super Rockwell
 
Hardness scale
Load, N
View of the indenter
Measuring range, HR
HR 15 N
147.31 N
Diamond cone
from 70 to 94
HR 30 N
294.2 N
Diamond cone
from 40 to 86
HR 45 N
441.3 N
Diamond cone
from 20 to 78
HR 15 T
147.31 N
Ball Ø1, 588mm
from 62 to 93
HR 30 T
294.2 N
Ball Ø1, 588mm
15 to 82
HR 45 T
441.3 N
Ball Ø1, 588mm
from 10 to 72
 
Test load device unit for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009:
- Rockwell method:
- Preview - 98.07 N;
- Full - 588.4 N; 980.7 N; 1471N;
- Method Superficial Rockwell:
- Preview - 28.42 N;
- Full - 147.1 N; 294.2 N; 441.3 N;
The maximum permissible errors of test loads device device for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 Rockwell method:
- Pre - ± 1%;
- Full - ± 0,5%;
- Method Superficial Rockwell:
- Pre - ± 1%;
- Full - ± 0,5%;
Limits of permissible absolute error of measurement instrument instrument for measuring the hardness method Rockwell and Superficial Rockwell hardness TRS 5009 Rockwell are shown in Table 3;
 
Table 3: Limits of the absolute error of measurement instrument instrument for measuring the hardness method Rockwell and Superficial Rockwell hardness TRS 5009 Rockwell
 
Intervals Hardness Rockwell c designation
Limits of permissible absolute error of measurement of hardness HRC, HR, (±)
from 20HRA to 75HRA
± 2.0HR
from 75HRA to 88HRA
± 1.5HR
from 20HRB to 80HRB
± 3.0HR
from 80HRB to 100HRB
± 2.0HR
from 20HRC to 35HRC
± 2.0HR
35HRCdo of 55 HRC
± 1.5HR
HRC 55 to 70HRC
± 1.0HR
 
Limits of permissible absolute error of measurement of hardness instrument instrument for measuring the hardness method Rockwell and Superficial Rockwell scales for TRS 5009 Super Rockwell are shown in Table 4;
 
Table 4: Maximum permissible absolute error of hardness measurement device for measuring the hardness of the device according to the method Rockwell and Superficial Rockwell scales for TRS 5009 Super Rockwell
 
Superficial Rockwell scales
Limits of permissible absolute error of measurement of hardness HRC, HR, (±)
HR15N, HR30N, HR45N
± 2.0HR
HR15T, HR30T, HR45T
± 3HR
 
The distance from the tip to the top of the test work plane instrument instrument for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 adjustable - from 0 mm to 240 mm;
Distance from the tip to the wall of the test case, which limits the size of the test items - 145mm;
The hydraulic system of the device device for measuring the hardness of the method of Rockwell and Superficial Rockwell TRS 5009 provides a smooth application in the main load 2c-8c;
Of full scale reading device - a dial indicator in the measurement of hardness method Rockwell and Superficial Rockwell hardness is 0.5 units, which corresponds to the movement of the tip of 0,001 mm;
Overall dimensions instrument for measuring hardness method Rockwell and Superficial Rockwell TRS 5009:
- Length - 490mm;
- Width - 170mm;
Height - 780mm;
Unit weight device for measuring the hardness of the method of Rockwell and Superficial Rockwell TRS 5009 - 82kg;
Full average life of the device - not less than 10 years;
A device for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 allows reference to evaluate the hardness of HRC in the range according to the values ​​specified in Table 3;
 
Table 3: Supplemental assessment instrument instrument for measuring the hardness of the method of Rockwell and Superficial Rockwell hardness TRS 5009 Rockwell
 
Hardness scale
Load, N
View of the indenter
Measuring range, HR
D
980.7 N
Diamond cone
from 40HR to 77HR
E
980.7 N
Ball Ø 3,175 mm
from 70HR to 100HR
F
588.4 N
Ball Ø 1,588 mm
from 60HR to 100HR
G
1471N
Ball Ø 1,588 mm
from 30HR to 94HR
H
588.4 N
Ball Ø 3,175 mm
from 30HR to 100HR
K
1471N
Ball Ø 3,175 mm
from 40HR to 100HR
L
588.4 N
Ball Ø 6,35 mm
from 20HR to 115HR
M
980.7 N
Ball Ø 6,35 mm
from 20HR to 115HR
P
1471N
Ball Ø 6,35 mm
from 20HR to 100HR
R
588.4 N
Ball Ø 12,7 mm
from 20HR to 115HR
S
980.7 N
Ball Ø 12,7 mm
from 20HR to 100HR
V
1471N
Ball Ø 12,7 mm
from 20HR to 100HR
 
Completeness of the apparatus unit for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 provided to the extent necessary for its installation and commissioning in accordance with the documentation and working conditions of the order;
The delivery products include operational documents (Manual);
Completeness of the apparatus unit for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 is provided in Table 4 under;
 
Table 4: Delivery unit device for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009
 
Document Designation
The name and symbol
Quantity
Note
TRS5009
instrument
1 pc.
 
Replacement parts
CT1
Flat table test Ø 139mm
1 pc.
 
CT3
Prismatic Table Test Ø 39mm angle of 90 °
1 pc.
 
GOST 9377-81
Tax tip Rockwell
1 pc.
In the case
 
Tip 1.588
1 pc.
 
Accessories
GOST 9031-75
Hardness model 2nd class MTR-1
1 com.
In the case
 
Set of keys
1 pc.
 
Operational documentation
 
Operating manual for the device
1 pc.
 
 
Passport to model hardness
1 pc.
 
 
Verification certificate
1 pc.
 
 
The additional supply of equipment devices for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 (available upon request) under Table 5;
 
Table 5: The additional supply unit device for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 (available on request)
 
Document Designation
The name and symbol
Quantity
Note
PF1
Retaining clip
1 pc.
 
CT2
Flat table test Ø 179mm
1 pc.
 
CT4
Prismatic Table Test Ø 58mm angle of 150 °
1 pc.
 
 
Tip 5
1 pc.
 
 
Tip 3.175
1 pc.
 
 
Tip 6.35
1 pc.
 
 
Tip of 12.7
1 pc.
 
 
Tip 10
1 pc.
 
Spare parts
GOST 3722-81
Balls 1.588 mm ± 0,003 mm.
5 pcs.
In the case
GOST 3722-81
Balls 2.5 mm ± 0,003 mm.
5 pcs.
In the case
GOST 9031-75
Balls 5mm ± 0,003 mm.
5 pcs.
In the case
GOST 3722-81
Balls 3,175 mm ± 0,003 mm.
5 pcs.
In the case
GOST 3722-81
Beads 6.35 mm ± 0,003 mm.
5 pcs.
In the case
GOST 3722-81
Balls 12.7 mm ± 0,003 mm.
5 pcs.
In the case
GOST 3722-81
Balls 10mm ± 0,003 mm.
5 pcs.
In the case
 
The manufacturer guarantees that the quality of the device unit for measuring the hardness method Rockwell and Superficial Rockwell TRS 5009 technical requirements specifications provided the customer terms and conditions of storage, transportation, installation, operation, and its specified operational documentation.
Rate the product: TRS 5009
Number of views: 1994
Product rating: 4.4
Number of grades: 279
* rating and all product statistics are updated once a month; information is current as of 28 March 2024

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.