Products catalog
Price:
on request
Product information updated 12 December 2024.
Found cheaper?
Let us know. Our price is the best.
Warranty:
12 months.
Warranty extension up to 5 years.
Terms of delivery:
To all regions of the country, international delivery.
Product information updated 12 December 2024.
Found cheaper?
Let us know. Our price is the best.
Warranty:
12 months.
Warranty extension up to 5 years.
Terms of delivery:
To all regions of the country, international delivery.
Technical characteristics
Brake tester STM-15000 - universal monobloc stand, which designed to measure all the parameters of the brake system of all types of vehicles with an axle load of 12 000 kg - all passenger, all-wheel drive, vans, buses, trucks and other, including heavy.
Brake Testers series of STM-15000 are equipped with rollers monolithic-type cut-out thorns (do not require periodic renewal or "welded"), the factory warranty on the rollers of this type for 12 years!
Brake stands STM-15000 consists of one roller, Width 2950 mm which is only - ideal for inspection points cars and trucks with a small room!
These stands can operate in temperatures from -30° C to +50° C, which allows to use them in unheated rooms and open areas with a canopy.
Examples of brake stands STM-15000:
If you want to view all the pictures on this lab, click on the picture or inscription.
To buy tester STM-15000 contact your account manager. Price brake tester will surprise you.
Brake stands STM-15000 provide automatic performance measurement and calculation of the following braking performance:
Parameter | Measuring range | Error Measurement |
Braking force on each wheel | from 0 kN to 26 kN | ±3% |
Weight one axis car | from 0 kg to 12 000 kg | ±3% |
Reaction time brake system | from 0 s to 2 s | ±0,01 s |
Efforts on the organ Management | from 0 H to 1000 H | ±4% |
For control vehicle without leading differential between axes tester STM provides the rotation of the left and right wheel in opposite directions.
Supplied brake tester STM-15000:
1. Roller module installation - 1 pcs.
2. The force sensor on the brake pedal - 1 pcs.
3. Weight sensors - 4 pcs.
4. Control cabinet - 1 pcs.
5. Traffic lights - 1 pcs.
6. Tripod - 1 pcs.
7. System unit PC Intel ® Pentium 4M - 1 pcs.
8. LCD Monitor 19 inches - 1 pcs.
9. Software "Diagnostic Control 4.0" - 1 pcs.
10. Software "Brake Stand STM 5.00" - 1 pcs.
11. PC keyboard - 1 pcs.
12. Optical Mouse - 1 pcs.
13. Adapter USB-TC - 1 pcs.
14. Cable kit - 1 pcs.
15. Calibration kit - 1 pcs.
16. Mounting kit - 1 pcs.
17. Passport - 1 pcs.
18. Operating Manual - 1 pcs.
19. Methods of verification - 1 pcs.
20. Installation Instructions - 1 pcs.
21. Certificate of state metrological verification - 1 pcs.
Buying tester STM-15000, you will get high quality and durable stand at an affordable price.
Stands STM-15000 can be used at service stations PBX auto businesses, the state inspection stations controllers, special service, in operation, when placed on the line, as well as annual inspections using diagnostics tools. May also be included in the automated inspection PBX lines, combined in software and hardware LTK or container in the diagnostic stations LTK-M.
Specifications STM-15000:
Initial speed of braking - 2 km/h.
Measuring range of the braking force at each wheel axle checked - from 0 kN to 26 kN.
Permissible relative error limit - no more than ±3.
Measuring range effort on the control - from 0 N to 1000 N.
Limit of permissible relative error - ±4.
Range of weight measurement axis - from 0 kg to 12 000 kg.
Permissible relative error limit - no more than ±3.
Measuring range brake system response time - from 0 seconds to 2 seconds.
Permissible relative error limit - no more than ±0,01.
Power consumption - no more than 13 kW.
Track width - from 960 mm to 2800 mm.
Wheel diameter - from 500 mm to 1200 mm.
Power supply:
- Voltage - 323 V to 418 V;
- Frequency - 50±1 Hz.
Warm-up time - no more than 15 minutes.
Continuous operation of the stand - at least 8 hours.
Average life - at least 8 years.
MTBF - not less than 1000 hours.
Average time running again - no more than 6,4 hours.
Operating temperature range of the measurement - from -30° C to +50° C.
Dimensions:
- Roller unit (2 pieces) - no more than 2950x730x360 mm;
- Front control - no more 600x420x1400 mm;
- Traffic - no more 70x200x200 mm.
Weight:
- Roller system - no more than 1150 kg;
- Front controls - not more than 50 kg;
- Traffic - no more than 5 kg.
Structural features STM-15000:
Automatic control of measurement modes or manual mode with radio control.
Provides display of measurement results and service information on the screen and a bulletin board.
Printout of measurement protocol and schedules braking forces.
Teams operator and the driver of the vehicle is displayed on the monitor screen and duplicated at the traffic lights or remote display.
Disconnecting the drive rollers occurs at a fixed rate of slip between the wheels of the car and checked the drive rollers.
Stand STM-15000 enables self-aligning car during testing, automatic switching on and off drives when zoomed in and out.
Dynamic measurement of braking forces of the wheels and the axle loads under braking axle load given under braking.
Increased durability rollers provide special hardening and surface treatment. Roller coverings is resistant to studded tires.
Corrosion protection of all elements of the roller installation STM: polymer powder coating.
1. Brake stand provides automatic performance measurement and calculation of the following braking performance:
- Weight axis diagnosed kg;
- The control force, N;
- Response time braking system;
- Specific braking force of each wheel, kN;
- Relative difference in brake force one axis;
- Oval wheel axis diagnosed.
3. Automatic control of the measurement mode or manually with radio control.
5. Luft detector LD-4000 to identify and eliminate backlash in the joints. Designed to test and shock absorber supports, ball joint suspension, engine mount support arm suspension, steering linkage, wheel bearing, etc. Maximum axle load 4000 kg.
NPF "META" is currently the only producer of a complete list of equipment for inspection (gas analyzers, smoke meters, photometers, lyuftomer, brake testers, testers dampers testers input side wheels, light meters, etc.). It is possible to develop the necessary software by which managed to combine all instruments for diagnosing the technical condition of the car in a single line of technical control to build a common research protocol technical condition. All of these procedures on the formation of the protocol is done automatically - you only need to bring all of these devices to a central computer using an adapter LTK (master link or over the air).
These stands STM work equally effectively as with imported and domestic cars with, as well as military and special equipment.
2. Supply
The kit includes all the brake tester need to carry out maintenance: measuring the weight of the car, brake system response time, the force on the brake pedal. Also available light tower, by which the operator sends commands to the driver.
The basic package includes a modern PC «Intel ® Pentium 4M» 19 "LCD monitor with a set of necessary Russified licensed software and database specifications of all cars , "Brake Stand STM 5.00".
With the help of this software you can connect to your computer in a single line of technical control all other devices of NPF "META" (brake stands, photo and video recording, shock absorber testers, testers slip wheels, gas analyzers, smoke meters, photometers, lyuftomer, measuring light transmission coefficient Glass et al.) After vehicle diagnostics program "Diagnostic Control 4.0" automatically generates and prints a common protocol diagnostics vehicle, which will include vehicle registration data, the owner and all the parameters that were measured.
Twice a year, the manufacturer provides free software updates, which contains the necessary technical specifications of all new cars both foreign and domestic automotive industry.
As an option, the system comes videoregistration IAC or SVR, to automatically recognize the number TC, fix the fact of inspection through photos and videos, keep track of the number of vehicles that will soon be mandatory for passage THAT.
3. Quality stands STM
Due to the unique patented design rollers are guaranteed 12 years without further treatment. Strengthening the material stiffness rollers (done to increase their resource) realized cementation method - metal carbon saturation. The result of this process than in the result of the thermal hardening 3-4. Surface hardness of 55 HRC. Cementation increases service life of rollers 4 times. Spikes - solid roller. Are produced by radial axis milling roller base.
Due to the spiral-radial incisions thorns roller drum brake tester STM occurs when the vehicle self-centering measurements. It provides not only high accuracy, but also greatly increases the uptime of the brake tester.
No mutual wear spikes on the rollers and on the studded tires due to the rectangular shape of the studs on the roller and thus the lack of cohesion between them hard.
All components are covered with powder paint and a three-layer dip galvanized. Applied to the electrolytic method and provides 100% coverage of the surface, which is processed and makes it impossible to corrosion video.
STM stands combine civil and military quality of universality.
4. Annual verification
These brake stands STM series of NPF "META" listed in the State Register of measuring instruments, which allows for annual calibration with minimal cost in any department of the State Register.
The package includes a stand STM necessary adaptations for the annual verification - levers, weights, dynamometer frame silozadayuschee device. Through this annual inspection costs about 5 times cheaper compared with stands from other manufacturers, for whom these tools are available or for a fee, or you need every year for verification call center service representatives (for a fee) or take back booth in the State Register Desk Reference .
The company also "Zapadpribor" offers services for calibration of equipment, including brake stands and other devices for inspection, on favorable terms in the shortest possible time.
5. Opportunities stands
Bandwidth stands - up to 95 cars per shift. Such an amount is achieved through technical strength brake tester (not necessary preventive stop), by automating data transfer protocol META to a central computer and automatic data entry into the protocol.
Due to the great length of brake rollers (a total of about three meters) stands for universal series STM further than cars and trucks, you can diagnose large equipment: harvesters, tractors, mining equipment, tractors and others.
Provides a large margin of structural strength (50%), which allows for rapid inspection of the vehicle with a load (useful for ATP, MES, MO, other institutions and enterprises).
Operating temperature range (-30° C to +50° C) allows data brake stands in unheated rooms and open areas.
6. Installation, commissioning and staff training
The company "Zapadpribor" provides a full range of services for installation, commissioning works on the highest professional level. Also provides training to operate the equipment in the field or in the service center with the subsequent registration certificate.
7. Current, warranty and service
Thanks to the convenient placement of motors and sensors (on par with casters) maintenance requires minimal time and effort compared to many other stands where engines and constructively sensors placed under the rollers in the pit, and for the most minimal routine maintenance (eg, pour oil into the gear or bearing grease) stand must be fully removed by crane from the frame-lodgement.
Warranty, after-sales and service brake tester is made in the service center "Zapadpribor" on the road or at the client. Also on the company's stock as an authorized dealer, always have the most necessary accessories and spare parts. This ensures minimum terms of repair and maintenance of this equipment.
As you are already familiar with all the features listed, then you definitely have a desire to buy a tester STM-15000. Contact our sales department to buy tester. We will gladly provide you with all the necessary consultations. Price tester STM-15000 will surprise you.
Photos: STM-15000
Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.
The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.
In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.
Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.
We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba, Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.
We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.
The online store takes an active part in such procedures as electronic bidding, tender, auction.
If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.
Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.
While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.
In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.
On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.
All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.
If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.
We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.
We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.