Tester STM-1500 - tester for monitoring the performance of brake systems and sustainability Motorcycle axle load up to 1500 kg.

This stand can also be called: STM1500, STM 1500.

Brake Testers series of STM-1500 are equipped with rollers monolithic-type cut-out thorns (do not require periodic renewal or "welded"), the factory warranty on the rollers of this type for 12 years!

These stands can operate in temperatures from -30° C to +50° C, which allows to use them in unheated rooms and open areas with a canopy.

To buy tester STM-1500 contact your account manager. Price brake tester will surprise you.

Tester STM provides the rotation of wheels in different directions.

Supplied brake tester STM-1500:

1. Roller module installation - 1 pcs.

2. The force sensor on the brake pedal - 1 pcs.

3. Weight sensors - 4 pcs.

4. Control cabinet - 1 pcs.

5. Traffic lights - 1 pcs.

6. Tripod - 1 pcs.

7. System unit PC Intel ® Pentium 4M - 1 pcs.

8. LCD Monitor 19 inches - 1 pcs.

9. Software "Diagnostic Control 4.0" - 1 pcs.

10. Software "Brake Stand STM 5.00" - 1 pcs.

11. PC keyboard - 1 pcs.

12. Optical Mouse - 1 pcs.

13. Adapter USB-TC - 1 pcs.

14. Cable kit - 1 pcs.

15. Calibration kit - 1 pcs.

16. Mounting kit - 1 pcs.

17. Passport - 1 pcs.

18. Operating Manual - 1 pcs.

19. Methods of verification - 1 pcs.

20. Installation Instructions - 1 pcs.

21. Certificate of state metrological verification - 1 pcs.

Buying tester STM-1500, you will get high quality and durable stand at an affordable price.

Stands STM-1500 can be used at service stations PBX auto businesses, the state inspection stations controllers, special service, in operation, when placed on the line, as well as annual inspections using diagnostics tools. May also be included in the automated inspection PBX lines, combined in software and hardware LTK or container in the diagnostic stations LTK-M.

Specifications STM-1500:

The measuring range of the braking force at each wheel axle checked - from 0 kN to 5 kN.

Mass axis measuring range - from 0 kg to 1500 kg.

Measuring range effort on the control - from 0 N to 1000 N.

Power consumption - 2,5 kW.

Track width - to 198 mm.

Wheel diameter (bus) - from 500 to 850 mm.

Power supply:

- Voltage - 323 V to 418 V;

- Frequency - 50±1 Hz.

Warm-up time - no more than 15 minutes.

Continuous operation of the stand - at least 8 hours.

Average life - at least 8 years.

Operating temperature range of the measurement - from -30° C to +50° C.

Dimensions STM-1500:

- Roller setting - 1400x750x230 mm;

- Control cabinet - 550x460x120 mm;

- Traffic - no more 70x200x200 mm.

Weight:

- Roller setting - 170 kg;

- Control box - 20 kg;

- Traffic - no more than 5 kg.

Structural features STM-1500:

Automatic control of measurement modes or manual mode with radio control.

Provides display of measurement results and service information on the screen and a bulletin board.

Printout of measurement protocol and schedules braking forces.

Teams operator and the driver of the vehicle is displayed on the monitor screen and duplicated at the traffic lights or remote display.

Disconnecting the drive rollers occurs at a fixed rate of slip between the wheels of the car and checked the drive rollers.

Stand STM-1500 enables self-aligning car during testing, automatic switching on and off drives when zoomed in and out.

Dynamic measurement of braking forces of the wheels and the axle loads under braking axle load given under braking.

Increased durability rollers provide special hardening and surface treatment. Roller coverings is resistant to studded tires.

Corrosion protection of all elements of the roller installation STM: polymer powder coating.

1. Brake stand provides automatic performance measurement and calculation of the following braking performance:
- Weight axis diagnosed kg;
- The control force, N;
- Response time braking system;
- Specific braking force of each wheel, kN;
- Relative difference in brake force one axis;
- Oval wheel axis diagnosed.

2. Displays measurement results and their graphical interpretation on the screen, and a bulletin board

3. Automatic control of the measurement mode or manually with radio control.

NPF "META" is currently the only producer of a complete list of equipment for inspection (gas analyzers, smoke meters, photometers, lyuftomer, brake testers, testers dampers testers input side wheels, light meters, etc.). It is possible to develop the necessary software by which managed to combine all instruments for diagnosing the technical condition of the car in a single line of technical control to build a common research protocol technical condition. All of these procedures on the formation of the protocol is done automatically - you only need to bring all of these devices to a central computer using an adapter LTK (master link or over the air).

These stands STM work equally effectively as with imported and domestic cars with, as well as military and special equipment.

2. Supply

The kit includes all the brake tester need to carry out maintenance: measuring the weight of the car, brake system response time, the force on the brake pedal. Also available light tower, by which the operator sends commands to the driver.

The basic package includes a modern PC «Intel ® Pentium 4M» 19 "LCD monitor with a set of necessary Russified licensed software and database specifications of all cars , "Brake Stand STM 5.00".

With the help of this software you can connect to your computer in a single line of technical control all other devices of NPF "META" (brake stands, photo and video recording, shock absorber testers, testers slip wheels, gas analyzers, smoke meters, photometers, lyuftomer, measuring light transmission coefficient Glass et al.) After vehicle diagnostics program "Diagnostic Control 4.0" automatically generates and prints a common protocol diagnostics vehicle, which will include vehicle registration data, the owner and all the parameters that were measured.

Twice a year, the manufacturer provides free software updates, which contains the necessary technical specifications of all new cars both foreign and domestic automotive industry.

As an option, the system comes videoregistration IAC or SVR, to automatically recognize the number TC, fix the fact of inspection through photos and videos, keep track of the number of vehicles that will soon be mandatory for passage THAT.

3. Quality stands STM

Due to the unique patented design rollers are guaranteed 12 years without further treatment. Strengthening the material stiffness rollers (done to increase their resource) realized cementation method - metal carbon saturation. The result of this process than in the result of the thermal hardening 3-4. Surface hardness of 55 HRC. Cementation increases service life of rollers 4 times. Spikes - solid roller. Are produced by radial axis milling roller base.

Due to the spiral-radial incisions thorns roller drum brake tester STM occurs when the vehicle self-centering measurements. It provides not only high accuracy, but also greatly increases the uptime of the brake tester.

No mutual wear spikes on the rollers and on the studded tires due to the rectangular shape of the studs on the roller and thus the lack of cohesion between them hard.

All components are covered with powder paint and a three-layer dip galvanized. Applied to the electrolytic method and provides 100% coverage of the surface, which is processed and makes it impossible to corrosion video.

STM stands combine civil and military quality of universality.

4. Annual verification

These brake stands STM series of NPF "META" listed in the State Register of measuring instruments in Russia, Kazakhstan, Belarus and Ukraine, which allows for annual calibration with minimal cost in any department of the State Register.

The package includes a stand STM necessary adaptations for the annual verification - levers, weights, dynamometer frame silozadayuschee device. Through this annual inspection costs about 5 times cheaper compared with stands from other manufacturers, for whom these tools are available or for a fee, or you need every year for verification call center service representatives (for a fee) or take back booth in the State Register Desk Reference .

The company also "Zapadpribor" offers services for calibration of equipment, including brake stands and other devices for inspection, on favorable terms in the shortest possible time.

5. Opportunities stands

Bandwidth stands - up to 95 cars per shift. Such an amount is achieved through technical strength brake tester (not necessary preventive stop), by automating data transfer protocol META to a central computer and automatic data entry into the protocol.

Due to the great length of brake rollers (a total of about three meters) stands for universal series STM further than cars and trucks, you can diagnose large equipment: harvesters, tractors, mining equipment, tractors and others.

Provides a large margin of structural strength (50%), which allows for rapid inspection of the vehicle with a load (useful for ATP, MES, MO, other institutions and enterprises).

Operating temperature range (-30° C to +50° C) allows data brake stands in unheated rooms and open areas.

6. Installation, commissioning and staff training

The company "Zapadpribor" provides a full range of services for installation, commissioning works on the highest professional level. Also provides training to operate the equipment in the field or in the service center with the subsequent registration certificate.

7. Current, warranty and service

Thanks to the convenient placement of motors and sensors (on par with casters) maintenance requires minimal time and effort compared to many other stands where engines and constructively sensors placed under the rollers in the pit, and for the most minimal routine maintenance (eg, pour oil into the gear or bearing grease) stand must be fully removed by crane from the frame-lodgement.

Warranty, after-sales and service brake tester is made in the service center "Zapadpribor" on the road or at the client. Also on the company's stock as an authorized dealer, always have the most necessary accessories and spare parts. This ensures minimum terms of repair and maintenance of this equipment.

As you are already familiar with all the features listed, then you definitely have a desire to buy a tester STM-1500. Contact our sales department to buy tester. We will gladly provide you with all the necessary consultations. Price tester STM-1500 will surprise you.