Shunt 75SHSMT2 Shunt 75SHSMT2
4.9 63
Shunt measuring steady 75SHSMT2 (75SHSM-T2, 75SHSM T2)
Designed for the extension of the limits of measuring DC ammeters and counters Cove ampere-hours;
Accuracy class - 0.5;
Rated current - 75A-7500A;
Nominal Impedance - 10 mkOm mkOm-1000.
Electrical measuring instruments
analog panel meters
shunts (75ShS, 75ShSM, 75ShIS and others)

Available in our warehouse:2 000 pcs от производителя.

Production under the order: any quantity.

Price

on request

  include VAT

-50%off factory price

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Technical characteristics

Shunt measuring steady 75SHSMT2 (75SHSM-T2, 75SHSM T2)
 
Shunt measuring steady 75SHSMT2 intended to limit the extension measuring DC ammeters and counters Cove ampere-hours.
 
Product Specifications stationary measuring shunts 75SHSMT2:
 
Accuracy class 0.5;
The voltage drop across the terminals of the potential for all grafts at rated current is 75mV;
Rated currents and nominal resistance of the shunt measuring stationary products 75SHSMT2 summarized in Table 1;
Limits of error of shunt - ± 0,5%;
 
Table 1 The nominal current and nominal resistance of the shunt measuring stationary products 75SHSMT2
Rated current
Intentional impedance
75A
1000 mkOm
100A
750 mkOm
150 A
500 mkOm
200A
375 mkOm
300A
250 mkOm
500A
150 mkOm
750A
100 mkOm
1000 A
75 mkOm
1500 A
50 mkOm
2000A
37.5 mkOm
3000A
25 mkOm
4000A
18.75 mkOm
5000A
15 mkOm
6000A
12.50 mkOm
7500A
10 mkOm
 
Maximum permissible variation of the resistance values ​​of the shunt products 75SHSMT2 measuring stationary, appearing as a result of termoelektrodvi zhuschey power at nominal load current is equal to half the absolute value of the limit of permissible basic error STI shunt;
Maximum permissible variations in the values ​​of shunt resistance, which has two or more current clips on each side, resulting from the unequal distribution of power in the place of summing up the current to shunt off with one Toko vomu clamp on each side of the shunt is equal to half the absolute value of the limit of permissible basic error;
Shunt 75SHSMT2 measuring steady-state is designed to operate at approximately rounding the air from -40 º C to +50 ° C and a relative humidity of 95% (at 40 ° C);
Shunts, intended for export to areas with cold-temperate and tropical climates, supplying lyayutsya for operation at temperatures from -40 º C to +50 ° C and a relative humidity of 90% (at 35 ° C).
Overall dimensions and weight of products 75SHSMT2 shunt measuring the stationary (non-current and potential terminals), we reduce the HN in Table 2;
The average lifetime of shunts to the cancellation - at least 15 years of age;
 
Table 2. Overall dimensions and weight of items measuring shunt 75SHSMT2 stationary (non-current and potential terminals)
Measurement limit
Weight, kg
Overall dimensions, mm
75A
0.19
120h22h12
100A
0.25
130h30h12
150 A
0.29
130h22h12
200A
0.38
130h30h12
300A
0.54
130h30h18
500A
0.41
150h35h20
750A
0.6
150h50h20
1000 A
0.8
170h50h30
1500 A
1.05
170h50h50
2000A
3.5
200h80h50
3000A
4.4
200h105h50
4000A
7
240h145h70
5000A
11
240h160h70
6000A
11
240h160h70
7500A
13
240h210h70

Photos: Shunt 75SHSMT2

75ShSMT2 4000A shunt image.

75ShSMT2 4000A shunt image.

75SHSMT2 4000A front view.

75SHSMT2 4000A front view.

75SHSMT2 4000A side view.

75SHSMT2 4000A side view.

75SHSMT2 4000A rear view.

75SHSMT2 4000A rear view.

75SHSMT2 4000A overhead view.

75SHSMT2 4000A overhead view.

75SHSMT2 4000A bottom view.

75SHSMT2 4000A bottom view.

75ShSMT2 100A shunt image.

75ShSMT2 100A shunt image.

75SHSMT2 150A shunt image.

75SHSMT2 150A shunt image.

75ShSMT2 500A shunt image.

75ShSMT2 500A shunt image.

75ShSMT2 750A shunt image.

75ShSMT2 750A shunt image.

75ShSMT2 1000A shunt image.

75ShSMT2 1000A shunt image.

75ShSMT2 1500A shunt image.

75ShSMT2 1500A shunt image.

75ShSMT2 2000A shunt image.

75ShSMT2 2000A shunt image.

LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

 

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

 

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

 

The company takes an active part in such procedures as electronic bidding, tender, auction.

 

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.