S1-167 (C1-167) S1-167 (C1-167)
4.9 63

S1-167 oscilloscope device for studying the periodic electrical signals in the frequency range from 0 up to 25 MHz, which is equipped tester components for observation of two - and three-point.
Screen size - 80x100 mm
Number of channels - 2.
The range of coefficient of variation - from 0.002 In/div to 20 V/div (±3 %).

Radiometric devices
oscilloscopes (S1-, S7-, S8-, S9-, Ya40-, Ya4S-, Ya9S- and others)

Production under the order: any quantity.


on request

  include VAT

Found cheaper?

Let us know. Our price is the best. 


12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Found cheaper?

Let us know. Our price is the best. 


12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Technical characteristics

Universal oscilloscope S1-167

Also, the device can be called: S1 167, S1167, c1-167, c1 167, c1167.


Oscilloscopes universal S1-167 - instruments for studies of periodic electric signals by visually observing them, measuring their amplitude and time parameters in the frequency range from 0 up to 25 MHz scale screen of a cathode-ray tube (CRT). They are used in the measurement of electrical signals in the workshop and laboratory conditions.


S1-167 equipped tester components, the purpose of which - observation of two - and three-point, through the development of a bipolar signal for the filing of the studied region of two-terminal device voltage or current to supply the control electrode three-point and issuance in the paths of the horizontal and vertical deflection and in the power of the illumination of the needed signals to obtain volt-ampere characteristics on the CRT screen.


Specifications S1-167:


Number of channels - 2.

Screen size - 80x100 mm

The range of coefficient of variation - from 0.002 In/div to 20 V/div (± 3 %).

Rise time HRP - not more than 14 NS.

Limits of the basic relative error of the coefficient of variation - to + / -3%.

Output voltage range in mode tester components - from -12 to +12 V.

Range of output current in the tester components - from -12 mA +12 mA.

The ability to 10 times the stretch marks.

Range sweep - from 100 NS/div to 0.1 s/div (to + 4 %).


Limits of the basic relative error in the sweep oscilloscope S1-167:

- without stretching - to + 4%;

- banner - ± 5%.


The limits of permissible error of measurement of time intervals in the temperature range should be:

- divider 1:10 - of - / + 6%;

- for each of the channels ± of 4.5%.


Input impedance - 1 MW/25 pF (divider 1:10 -10 IOM/12 pF).

Calibrator - 600 mV, 1 kHz (+or-1 %).

The presence of X-Y - a band of 20 Hz -1 MHz (coefficient of variation of 2 mV/div - 10 V/div±10%).


Weight - no more than 7 kg

Overall dimensions of the oscillograph S1-167 - not more than 141 x 302 x 384 mm


Parameters of the tester components:


Y axis - ± 12 mA.

X Axis - ± 12 V

Test voltage 0 V; 2; 4; 6; 8 V

Test current base - 0 mcA; 20 mcA; 40 mcA; 60 mcA; 80 mcA.

8-fold reduction.


Operating conditions of universal oscilloscope S1-167:


Ambient temperature - from +5 C to 40ºc.

Relative humidity at +25 oC - 80%.

AC voltage - 220 V + 22 V

Frequency AC - 50 approximately 0.5 Hz.

Power consumption - not more than 90 VA.


The manufacturer warrants the compliance of the produced oscilloscope S1-167 all technical requirements under the consumer of the rules and conditions of operation, storage and transportation, fixed in the documentation manual.

Photos: S1-167 (C1-167)

S1-167 (C1-167) device image.

S1-167 (C1-167) device image.

LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.


The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.


In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.


LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.


We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.


The company takes an active part in such procedures as electronic bidding, tender, auction.


If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.