D142 D142 Wattmeter D142, D142 kilovattmetr.
4.9 63
Wattmeter D142, D142 kilovattmetr (D 142, D-142)
Designed to measure active power in three-phase circuits of 50Hz and 400Hz-500Hz with a uniform load phases.
Dimensions - 85H85H92, 5mm.
Accuracy class - 2.5.
Tryaskoprochny, vibration, shock-resistant.
Electrical measuring instruments
analog panel meters
panel with round scale devices for harsh environments

Available in our warehouse:57 pcs от производителя.

Production under the order: any quantity.

Price

on request

  include VAT

-50%off factory price

The device is produced in 2021.

All measurement ranges and settings are available.

It is possible to customize any special scales.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Technical characteristics

Wattmeter D142, D142 kilovattmetr (D 142, D-142)
 
Wattmeter D142, D142 kilovattmetr designed to measure active power in three-phase circuits of 50Hz and 400Hz-500Hz with a uniform load phases.
Dimensions - 85h85h92 5mm.
Accuracy class - 2.5.
Tryaskoprochny, vibration, shock-resistant.
 
Technical characteristics of the devices wattmeters D142, D142 kilovattmetry:
 
Designed to measure active power in three-phase circuits of 50Hz and 400Hz-500Hz with a uniform load phases.
The device wattmeter D142, D142 kilovattmetr used at an ambient temperature of -40 º C to +60 ° C and relative humidity of 98% (at 60 ° C).
Measurement range, the nominal data and the method of inclusion in the wattmeter circuit presented in Table 1.
The main error of the instrument wattmeter D142, D142 kilovattmetr - ≤ ± 2,5%.
Settling time - ≤ 3 seconds.
The angle of the instrument scale wattmeter D142, D142 kilovattmetr - 90 º.
Scale length - 55mm.
The change of reading wattmeter D142, D142 kilovattmetr caused the deviation of temperature (within the operating temperature) from normal, does not exceed ± 0,5% for every 10 degrees;
- Due to the influence of external magnetic field strength of 400 A / m - not more than ± 2,5%;
- Due to the slope of devices on 45 ° - no more than ± 1%;
- Installation of devices to a ferromagnetic shield - no more than ± 0,5%.
Consumed by the device wattmeter D142, D142 kilovattmetr power circuits:
- Sequential circuits - ≤ 2x0, 5V ∙ A;
- Parallel circuit:
- At a voltage of 127V - ≤ 1,2 W;
- At a voltage of 220 V - ≤ 2W;
- At a voltage of 380 V - ≤ 3,5 Tues
Overall dimensions wattmeter D142, D142 kilovattmetr - 85h85h92 5mm.
Unit weight - 0.6 kg.
The measuring system devices - ferrodinamicheskaya.
Devices wattmeter D142, D142 kilovattmetr made ​​in hermetic enclosures for flush mounting.
 
Rated frequency in Hz
Rated current, A
 
 
Measurement range, kW at rated voltage (linear), in
Switching on the appliance
127V
220
380
 
50Hz and 400Hz-500Hz
5A
10A
20A
30A
50A
75A
100A
150 A
200A
300A
400A
600A
750A
1000 A
1500 A
2000A
3000A
4000A
5000A
6000A
1kW
2kW
4kW
6kW
10kW
15kW
20kW
30kW
40kW
60kW
80kW
120kW
150kW
200kW
300kW
400kW
600kVt
800kVt
1000kVt
1200kVt
2kW
4kW
8kW
12kW
20kW
30kW
40kW
60kW
80kW
120kW
150kW
250kW
300kW
400kW
600kVt
800kVt
1200kVt
1500 kW
2000kW
2500kVt
3kW
6kW
12kW
20kW
30kW
50kW
60kW
100kW
120kW
200kW
250kW
400kW
500kVt
600kVt
1000kVt
1200kVt
2000kW
2500kVt
3000kVt
4000kVt
With a current transformer secondary winding to 5A.
An optional wattmeters at 50 Hz can be produced with current transformer with a secondary winding on the 5A and with the intermediate-type transformer with ratio I1820 5 / 1
400Hz-500Hz
30A
50A
75A
100A
150 A
200A
6kW
10kW
15kW
20kW
30kW
40kW
12kW
20kW
30kW
40kW
60kW
80kW
20kW
30kW
50kW
60kW
100kW
120kW  
With the current transformer with a secondary winding on the type 1A I1820

Photos D142

D142 front view (scale).

D142 front view (scale).

D142 overhead view.

D142 overhead view.

LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

 

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

 

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

 

The company takes an active part in such procedures as electronic bidding, tender, auction.

 

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.