Products catalog

indicators panel

DUP-M

Available:

68 pcs

Remote position indicator DUP-M (DUPM, DUP M)
Designed for remote indication of the output shaft of the electric actuator having a rheostat or an inductive sensor.
More info ...

ИВЛМ1-1/7

Available:

200 pcs

ИВЛМ1-1/7 индикатор вакуумный люминесцентный предназначен для составления матричных знакомест или строк в устройствах отображения цифровой, буквенной и знаково-символической информации.

Напряжение накала - 2,4 В.

Ток накала - 35±5 мА.

More info ...

IM476/2 (ИМ476/2)

Available:

99 pcs

Recording indicator IM476/2 (IM4762, IM-476-2, IM 476 2, M476/2, M4762, M-476-2, M 476 2)
It is intended to indicate the recording process;
Scale - AME.7.029.002;
Current full deflection - 150mkA-250mkA.
More info ...

ИПУ индикатор

Available:

2 pcs

ИПУ индикатор положения унифицированный предназначен для выполнения функций определения положения рабочего органа исполнительного механизма в процентах от его полного хода, снабженного потенциометрическим, либо индуктивным датчиком перемещения.

Напряжение:

- переменного тока для питания датчиков перемещения - от 11 В до 15 В;

- вызывающее отклонение стрелки указателя положения от 0 до 100% - не более 2 В.

Сопротивление внешней нагрузки - не менее 70 Ом.

More info ...

ИТ к ПФТ индикатор

Available:

51 pcs

ИТ к ПФТ индикатор тока является аналоговым стрелочным щитовым прибором магнитоэлектрической системы.

Габаритные размеры - 160×160×90 мм.

Диапазон измерения - от 0 до 10.

More info ...

M20

Available:

5 pcs

Indicator M20 (M 20, M-20)
Designed to measure the values ​​proportional to the direct current;
Current full deflection - 1mA;
Basic error - ± 2,5%.
More info ...

M205

Available:

8 pcs

no-image
LED M205 (M 205, M-205)
Designed to measure the values ​​proportional to the direct current;
Current full deflection - 200uA;
Basic error - ± 2,5%.
More info ...

M226/1

Available:

54 pcs

LED M226/1 (M 226/1, M-226/1, M2261)
Designed for installation in the aircraft and the finder is not used outside of it;
Measurement range - 2mA, 5mA;
Basic error - ± 5%;
Vibration-proof, shock-resistant.
More info ...

M259

Available:

12 pcs

no-image
Voltage Indicator M259 (m 259, m-259)
Designed to measure DC voltage and at the same time signaling devices in portable mine;
Full deflection voltage - 15V;
Current in the contact device - 1mA-100mA;
Voltage at open contacts - 20V-60V;
Basic error - ± 4%.
More info ...

M26

Available:

6 pcs

Indicator M26 (M 26, M-26)
Designed to measure the values ​​proportional to the direct current;
Current full deflection - 2mA;
Basic error - ± 2,5%.
More info ...

M267

Available:

73 pcs

no-image
LED M267 (m 267, m-267)
Designed to set the aviation radio compass;
Current full deflection - 1mA;
Basic error - ± 5%;
Vibration-proof, shock-resistant.
More info ...

M310

Available:

9 pcs

LED M310 (M 310, M-310)
Designed to measure the values ​​proportional to the direct current;
Limit of measurement - 100mkA;
Basic error - ± 5%;
Tryaskoprochny, dustproof.
More info ...

M365

Available:

51 pcs

LED M356 (M 356, M-356)
Designed for monitoring reading dosimeters;
Measurement range - 20mkA-50mkA;
Basic error - ± 2,5%, ± 4%;
Vibration-proof, shock-resistant.
More info ...

M370

Available:

10 pcs

no-image
LED M370 (m 370, m-370)
Is designed to control the DC circuit transistor radios and tape recorders.
The final value of the measuring range - 50mkA-500mkA;
Acceptable basic error - ± 10,0%, ± 5,0%;
Vibration-proof, shock-resistant.
More info ...

M42180

Available:

281 pcs

LED M42180 (M 42180, M-42180)
Designed for current, characterizing the degree of charging alkaline batteries mine individual lamps, car batteries and other battery chargers in enclosed unheated rooms;
The final value of the measuring range - 6A;
Basic error - ± 10%;
Vibration-proof, shock-resistant.
 
More info ...

M42189

Available:

11 pcs

no-image
LED M42189 (m 42189, m-42189)
Designed for monitoring electrical signals.
Current full deflection - 7mA, 5mA;
Acceptable basic error - ± 8%;
Vibration-proof, shock-resistant.
More info ...

M4239

no-image
Indicator M4239 (M 4239, M-4239)
Designed for current, which characterizes the degree of traction charge alkaline and lead-acid batteries 40TZHN-400 60TZHN 12EN-350-400;
Current full deflection - 5mA;
Basic error - ± 10%;
Vibration-proof, shock-resistant.
More info ...

M4280

Indicator M4280 (M 4280, M-4280)
Designed for current, characterizing the degree of charging alkaline batteries mine individual lamps;
The final value of the measuring range - 6A;
Basic error - ± 10%;
Vibration-proof, shock-resistant.
 
More info ...

М4281 измеритель

Available:

3 pcs

М4281 индикатор тока предназначены для настройки радиоприемника.

Пределы измерения - от 0 до 1 мА.

Основная погрешность - ±10%.

More info ...

M4283

Available:

61 pcs

Indicator M4283 (m 4283, m-4283)
Designed for entry-level indicator in transistor tape recorders.
Current full deflection - 100mkA-500mkA;
Acceptable basic error - does not exceed ± 10% of full scale range;
Vibration-proof, shock-resistant.
More info ...

M4284

Available:

280 pcs

Indicator M4284 (m 4284, m-4284)
Designed for use in transistor radios in the combined DC devices as an indicator of adjustment;
Measurement range - 100mkA-1000mkA;
Basic error - ± 10%;
Vibration-proof, shock-resistant.
More info ...

M4285

Available:

10 pcs

Indicator M4285 (m 4285, m-4285)
Designed for use in transistor radios in the combined DC devices as an indicator of adjustment;
Measurement range - 300mkA-1000mkA;
Basic error - ± 4%;
Vibration-proof, shock-resistant.
More info ...

M4286

Available:

8 pcs

no-image
Indicator M4286 (m 4286, m-4286)
Designed to indicate the state (position) of the object of energy management equipment.
Current full deflection - 3mA;
Vibration-proof, shock-resistant.
More info ...

M4288

Available:

60 pcs

Noise Meter M4288 (m 4288, m-4288)
Designed to measure the electrical signals in a special apparatus.
Current full deflection - 200uA, 1000mkA;
Accuracy class - 4.0;
Vibration, tryaskoprochny.
More info ...

M4289

Available:

9 pcs

Noise Meter M4289 (m 4289, m-4289)
Designed to measure the electrical signals in a special apparatus.
Current full deflection - 200uA, 1000mkA;
Accuracy class - 4.0;
Vibration, tryaskoprochny.
More info ...

M4370

Available:

10 pcs

Indicator M4370 (m 4370, m-4370)
Designed for visual inspection of the DC consumer electronic equipment.
Current full deflection - 100mkA-500mkA;
Vibration-proof, shock-resistant.
More info ...

M4387

Available:

12 pcs

Іndikator M4387 (m 4387, m-4387)
Priznacheny to control rіvnya records magnіtofonіv that іnshoї pobutovoї radіoelektronnoї Industrial.
Strum Karpovna vіdhilennya - 100mkA-500mkA;
Admissible mainly pohibka - ± 4,0%;
Vіbrostіyky, udarostіyky.
More info ...

M476

Available:

99 pcs

Dial indicator M476 (M 476, M-476)
Designed to work in DC for the recording level control and power supply voltage of transistor tape recorders.
Vibration, resistant to shaking.
Current full deflection - 40mkA-300mkA.
More info ...

M4761

Available:

52 pcs

Indicator M4761 (M 4761, M-4761)
Is designed to control the recording level and voltage recorders;
Rated current - ± 150mkA 30MKA;
Vibration-proof, shock-resistant.
More info ...

M4762

Available:

93 pcs

Indicator M4762 (M 4762, M-4762)
Is designed to control the recording level and voltage recorders;
Rated current - ± 150mkA 30MKA;
Vibration-proof, shock-resistant.
More info ...

M4762-M1, M4762-M1.1

Available:

250 pcs

The level indicator entries M4762-M1, M4762-M1.1 (M 4762 M1, M-4762-M1 , M4762-M1, M4762 M1, M-4762M1, M 4762M1)
Designed to control the recording level recorders.
More info ...

M478

Available:

72 pcs

LED M478 (M 478, M-478)
Designed to work in DC for level monitoring and recording voltage transistor tape recorders.
Basic error - ± 5%.
Current full deflection - 40mkA-300mkA.
Vibration, tryaskoprochny.
More info ...

M59

Available:

8 pcs

Indicator M59 (M 59, M-59)
Designed to measure the values ​​proportional to the direct current;
Current complete deviation - 6.5 mA;
Basic error - ± 5%;
Vibration, splashproof.
More info ...

M597

Available:

5 pcs

LED M597 (M 597, M-597)
Designed to measure the current and voltage in DC;
Limits of measurement instrument:
- 1mA - enable direct;
- 20mA - with the inclusion of the NS;
- 4B - inclusion of the DS 3950 ohms;
- 50V - with the inclusion of the DS 50 k;
Basic error - ± 2,5%;
Vibration-proof, shock-resistant.
More info ...

М68500

Available:

11 pcs

no-image
LED M68500 (m 68500, m-68500)
Is intended to indicate power on and off the professional equipment of magnetic recording.
Rated current - no more 500mkA.
Vibration-proof, shock-resistant.
More info ...

M68501

Available:

53 pcs

LED M68501 (m 68 501, m-68501)
Designed for visual monitoring of signal strength in consumer electronic equipment.
Current full deflection - no more than ± 250mkA 25mkA.
Vibration-proof, shock-resistant.
More info ...

М68501-01

Available:

51 pcs

М68501-01 индикатор уровня заряда батареи предназначен для визуального контроля уровня сигнала в бытовой радиоэлектронной аппаратуре.

Ток полного отклонения - 250±25 мкА.

Внутреннее сопротивление - не более 1 кОм.

More info ...

M68502

Available:

83 pcs

LED M68502 (m 68502, m-68502)
Designed for visual monitoring of signal strength in consumer electronic equipment.
Current full deflection - no more than ± 250mkA 25mkA.
Vibration-proof, shock-resistant.
More info ...

M68504

Available:

9 pcs

no-image
LED M68504 (m 68504, m-68504)
Designed for visual monitoring of signal strength in consumer electronic equipment.
Current full deflection - no more than ± 400mkA 40mkA.
Vibration-proof, shock-resistant.
More info ...

M68505

Available:

71 pcs

LED M68505 (m 68505, m-68505)
Designed for visual inspection of the level of the electrical signal on two channels in stereo audio equipment.
Current full deflection - no more than ± 250mkA 25mkA.
Vibration-proof, shock-resistant.
More info ...

M732

Available:

83 pcs

no-image
LED type setting M732 (M 732, M-732, m732, m 732, m-732)
Designed for integration into portable equipment.
Current full deflection - 100mkA.
Dust and splash-proof.
More info ...

M733

Available:

72 pcs

LED type setting M733 (M 733, M-733)
Designed to fine tune the network of transistor radios.
Dimensions - 37h38mm.
Vibration and tryaskoprochny.
 
More info ...

М733/1

Available:

44 pcs

М733/1 индикатор настройки предназначен для точной настройки сетевых транзисторных приемников.

Основная погрешность - ±10%.

Внутреннее сопротивление - не более 3000 Ом.

Длина шкалы - 26 мм.

More info ...

M733/2

Available:

72 pcs

    M733/2 control indicator (M 733/2; M-733/2; M733-2; M 733-2; M-733/2; m733/2: m 733/2; m-733/2; m733-2; m 733-2; m-733/2)
    The M733/2 control indicator - the device intended for exact control of network transistor radio receivers.
    Range of measurements: 50-0-50mcA.
    Internal resistance of the indicator - ≤ 3000Om. More info ...

РПН указатели

Available:

27 pcs

РПН указатели положения предназначены для индикации положения РПН в приводах отечественного и импортного производства, а также для передачи данных о положении привода в цифровом виде для систем АСУ.

Габаритные размеры - не более 144×144×111 мм.

Потребляемая мощность - не более 15 Вт.

Яркость свечения индикатора - 10 000 мКд.

More info ...

UP-30

Available:

19 pcs

A pointer to the provisions of UP-30 (UP30, UP 30)
It is intended to indicate the position switching device transformers with voltage regulators and operates under the load in the indicator mode in conjunction with rotary sensor BS1404.
More info ...

FShch1882.1

Available:

53 pcs

    FShch1882.1 indication device (FShch 1882.1; FShch-1882.1; FShch 1882 1; FShch1882-1; FShch1882 / 1)
    FShch1882.1 indication device - product intended for use as part of the tachometer count.
    Dimensions - 126 × 36 × 136mm
    Weight - 0.6 kg.

More info ...

C4269

no-image
C4269 indication device (C 4269, C-4269)
Designed for visual inspection of load diesel engine having a centrifugal governor;
Current complete deviation - 2.5 mA;
Basic error - ± 5%;
Vibration-proof, shock-resistant.
More info ...

C4282

Available:

57 pcs

C4282 voltage indicator (C 4282, C-4282)
Designed for voltage control in autotransformers TVs.
Controlled voltage - 127V, 220V;
Basic error - ± 4,0%;
Vibration-proof, shock-resistant.
More info ...

C4283

Available:

6 pcs

C4283 voltage indicator (C 4283, C-4283)
Designed for voltage control in autotransformers TVs.
Controlled voltage - 127V, 220V;
Basic error - ± 4,0%;
Vibration-proof, shock-resistant.
More info ...

C4285

Available:

9 pcs

no-image
C4285 voltage indicator (C 4285, C-4285)
Designed to control the voltage at 30V diaproektorah LETI-60.
The frequency range - 45Hz-55Hz;
Basic error - ± 2,5%;
Vibration-proof, shock-resistant.
More info ...

LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

 

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

 

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

 

The company takes an active part in such procedures as electronic bidding, tender, auction.

 

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.