size 120x105mm
М1690А-16 микроамперметр, М1690А-16 миллиамперметр, М1690А-16 амперметр предназначен для встраивания в измерительную и испытательную аппаратуру и в изделия, эксплуатируемые в полевых условиях при повышенных механических и климатических воздействиях.
Габаритные размеры - 120×105×75 мм.
Класс точности - 2,5.
More info ...
М1690А.70 микроамперметр, М1690А.70 миллиамперметр, М1690А.70 амперметр предназначен для встраивания в измерительную и испытательную аппаратуру и в изделия, эксплуатируемые в полевых условиях при повышенных механических и климатических воздействиях.
Габаритные размеры - 120×105×75 мм.
Класс точности - 2,5.
More info ...
М1690Д микроамперметр, миллиамперметр щитовой с измерительным механизмом магнитоэлектрической системы предназначается для измерения силы постоянного тока в электрических цепях.
Габаритные размеры - 115×100×70 мм.
Класс точности - 1,5.
More info ...
М1691А микроамперметр, миллиамперметр предназначен для измерения тока при креплении приборов на панелях переносных и стационарных установок, работающих при повышенных механических и климатических воздействиях.
Класс точности - 1,0.
Пределы измерения:
- микроамперметр - от 20 мкА до 500 мкА;
- миллиамперметр - от 1 мА до 10 мА.
More info ...
М2027 микроамперметр, миллиамперметр предназначен для измерения силы постоянного тока, используются в качестве показывающих приборов в переносных и стационарных электро- и радиотехнических устройствах.
Габаритные размеры - 120×105×75 мм.
Класс точности - 0,5; 1.
More info ...
Габаритные размеры - 120×105×72 мм.
Класс точности - 0,5; 1; 1,5.
М24-97 вольтметр щитовой предназначен для измерения малых величин постоянного тока, а также для измерения не электрических величин, пропорциональных величине постоянного тока, протекающего по рамке измерительного механизма.
Габаритные размеры - 120×105×59 мм.
Диапазоны измерения:
- от 0 до 10 В;
- от 0 до 30 В.
More info ...
М297 микроамперметр предназначен для измерения фототоков в пирометрах излучения переносного типа.
Габаритные размеры - 120×105×80 мм.
Ток полного отклонения - 100 мкА.
Внутреннее сопротивление - не более 460 Ом.
More info ...
Dimensions - 120х105mm.
Microammeter M903/1 (M-903/1, M 903/1, M-903-1, M 903-1, M903 1, M-903 1, M 903 1, m903 1, m-903 1, m 903 1 , m903/1, m-903/1, m 903/1, m-903-1, m 903-1)
Designed to measure the current in dc circuits.
Limit of measurement - 1mkA, 5mkA, 10mkA, 15mkA, 20mkA, 25mkA, 30mkA, 50mkA, 100mkA, 150mkA, 200mkA, 300mkA, 500mkA, 1000mkA, 1mkA-0mkA-1mkA, 5mkA-0mkA-5mkA, 10mkA-0mkA-10mkA, 15mkA-0mkA-15mkA, 20mkA-0mkA-20mkA, 25mkA-0mkA-25mkA, 30mkA-0mkA-30mkA, 50mkA-0mkA-50mkA, 100mkA-0mkA-100mkA, 150mkA-0mkA-150mkA, 200mkA-0mkA-200mkA, 300mkA-0mkA-300mkA, 500mkA-0mkA-500mkA, 1000mkA-0mkA-1000mkA.
Dimensions - 120x105x64mm.
Accuracy class - 1,0, 1,5.
Milliammeter M903/2 (m903 2, m-903 2, m 903 2, m903/2, m-903/2, m 903/2, m-903-2, m 903-2)
Designed to measure the current in dc circuits.
Limit of measurement - 1mA, 2mA, 3mA, 5mA, 7,5mA, 10mA, 15mA, 20mA, 25mA, 30mA, 50mA, 75mA, 100mA, 150mA, 200mA, 300mA, 500mA, 750mA, 1000mA, 1mA-0mA-1mA, 2mA -0mA-2mA, 3mA-0mA-3mA, 5mA-0mA-5mA, 7,5mA-0mA-7,5mA, 10mA-0mA-10mA, 15mA-0mA-15mA, 20mA-0mA-20mA, 25mA-0mA-25mA , 30mA-0mA-30mA, 50mA-0mA-50mA, 75mA-0mA-75mA, 100mA-0mA-100mA, 150mA-0mA-150mA, 200mA-0mA-200mA, 300mA-0mA-300mA, 500mA-0mA-500mA, 750mA -0mA-500mA, 1000mA-0mA-1000mA.
Dimensions - 120x105x64mm.
Accuracy class - 1.0, 1.5.
Ammeter M903/3 (m903 3, m-903 3, m 903 3, m903/3, m-903/3, m 903/3, m-903-3, m 903-3)
Designed to measure the current in dc circuits.
Limit of measurement - 1A, 2A, 3A, 5A, 10A, 20A, 30A, 50A, 75A, 100A, 150A, 200A, 300A, 500A, 750A, 1A-0A-1A, 2A-0A-2A, 3A-0A-3A , 5A-0A-5A, 10A-0A-10A, 20A-0A-20A, 30A-0A-30A, 50A-0A-50A, 75A-0A-75A, 100A-0A-100A, 150A-0A-150A, 200A -0A-200A, 300A-0A-300A, 500A-0A-500A, 750A-0A-750A.
Dimensions - 120x105x64mm.
Accuracy class - 1.0, 1.5.
Voltmeter M903/4 (m903 4, m-903 4, m 903 4, m903/4, m-903/4, m 903/4, m-903-4, m 903-4)
Designed to measure the voltage in DC.
Limit of measurement - 1V, 2V, 3V, 5V, 7,5V, 10V, 15V, 20V, 30V, 50V, 75V, 100V, 150V, 200V, 250V, 300V, 400V, 500V, 600V, 750V, 1000V, 1500V, 2500V , 3000V, 1V-0V-1V, 2V-0V-2V, 3V-0V-3V, 5V-0V-5V, 7,5V-0V-7,5V, 10V-0V-10V, 15V-0V-15V, 20V -0V-20V, 30V-0V-30V, 50V-0V-50V, 75V-0V-75V, 100V-0V-100V, 150V-0V-150V, 200V-0V-200V, 250V-0V-250V, 300V-0V -300V, 400V-0V-400V, 500V-0V-500V, 600V-0V-600V, 750V-0V-750V, 1000V-0V-1000V, 1500V-0V-1500V, 2500V-0V-2500V, 3000V-0V-3000V.
Dimensions - 120x105x64mm.
Accuracy class - 1.0, 1.5.
Microammeter M903M/1 (M-903M/1, M 903M/1, M-903M-1, M 903M-1, M903M 1, M-903M 1, M 903M 1)
Designed to measure the current in dc circuits.
Limit of measurement - 1mkA, 5mkA, 10mkA, 15mkA, 20mkA, 25mkA, 30mkA, 50mkA, 100mkA, 150mkA, 200mkA, 300mkA, 500mkA, 1000mkA, 1mkA-0mkA-1mkA, 5mkA-0mkA-5mkA, 10mkA-0mkA-10mkA, 15mkA-0mkA-15mkA, 20mkA-0mkA-20mkA, 25mkA-0mkA-25mkA, 30mkA-0mkA-30mkA, 50mkA-0mkA-50mkA, 100mkA-0mkA-100mkA, 150mkA-0mkA-150mkA, 200mkA-0mkA-200mkA, 300mkA-0mkA-300mkA, 500mkA-0mkA-500mkA, 1000mkA-0mkA-1000mkA.
Dimensions - 120x105x64mm.
Accuracy class - 1,0, 1,5.
Milliammeter M903M/2 (m903m 2, m-903m 2, m 903m 2, m903m/2, m-903m/2, m 903m/2, m-903m-2, m 903m-2)
Designed to measure the current in dc circuits.
Limit of measurement - 1mA, 2mA, 3mA, 5mA, 7,5mA, 10mA, 15mA, 20mA, 25mA, 30mA, 50mA, 75mA, 100mA, 150mA, 200mA, 300mA, 500mA, 750mA, 1000mA, 1mA-0mA-1mA, 2mA -0mA-2mA, 3mA-0mA-3mA, 5mA-0mA-5mA, 7,5mA-0mA-7,5mA, 10mA-0mA-10mA, 15mA-0mA-15mA, 20mA-0mA-20mA, 25mA-0mA-25mA , 30mA-0mA-30mA, 50mA-0mA-50mA, 75mA-0mA-75mA, 100mA-0mA-100mA, 150mA-0mA-150mA, 200mA-0mA-200mA, 300mA-0mA-300mA, 500mA-0mA-500mA, 750mA -0mA-500mA, 1000mA-0mA-1000mA.
Dimensions - 120x105x64mm.
Accuracy class - 1.0, 1.5.
Ammeter M903M/3 (m903m3, m-903m 3, m 903m3, m903m/3, m-903m/3, m 903m/3, m-903m-3, m 903m-3)
Designed to measure the current in dc circuits.
Limit of measurement - 1A, 2A, 3A, 5A, 10A, 20A, 30A, 50A, 75A, 100A, 150A, 200A, 300A, 500A, 750A, 1A-0A-1A, 2A-0A-2A, 3A-0A-3A , 5A-0A-5A, 10A-0A-10A, 20A-0A-20A, 30A-0A-30A, 50A-0A-50A, 75A-0A-75A, 100A-0A-100A, 150A-0A-150A, 200A-0A-200A, 300A-0A-300A, 500A-0A-500A, 750A-0A-750A.
Dimensions - 120x105x64mm.
Accuracy class - 1.0, 1.5.
M903M/4 voltmeter (m903m4, m-903m 4, m 903m4, m903m/4, m-903m/4, m 903m/4, m-903m-4, m 903m-4)
Designed to measure the voltage in DC.
Limit of measurement - 1V, 2V, 3V, 5V, 7,5V, 10V, 15V, 20V, 30V, 50V, 75V, 100V, 150V, 200V, 250V, 300V, 400V, 500V, 600V, 750V, 1000V, 1500V, 2500V , 3000V, 1V-0V-1V, 2V-0V-2V, 3V-0V-3V, 5V-0V-5V, 7,5V-0V-7,5V, 10V-0V-10V, 15V-0V-15V, 20V -0V-20V, 30V-0V-30V, 50V-0V-50V, 75V-0V-75V, 100V-0V-100V, 150V-0V-150V, 200V-0V-200V, 250V-0V-250V, 300V-0V -300V, 400V-0V-400V, 500V-0V-500V, 600V-0V-600V, 750V-0V-750V, 1000V-0V-1000V, 1500V-0V-1500V, 2500V-0V-2500V, 3000V-0V-3000V.
Dimensions - 120x105x64mm.
Accuracy class - 1.0, 1.5.
М906-10 микроамперметр щитовой, однопредельный предназначен для измерения силы тока в электрических цепях постоянного тока.
Габаритные размеры - 120×105×59 мм.
Класс точности - 1,0.
Диапазон измерений - от 0 до 150 мкА.
More info ...
М906-15 вольтметр щитовой, однопредельный предназначен для измерения напряжения в электрических цепях постоянного тока.
Габаритные размеры - 120×105×59 мм.
Класс точности - 1,5.
More info ...
М906-2 миллиамперметр, М906-2 микроамперметр, М906-2 милливольтметр щитовой, однопредельный предназначен для измерения силы тока и напряжения в электрических цепях постоянного тока.
Габаритные размеры - 120×105×59 мм.
Класс точности - 2,5.
More info ...
М906-6 вольтметр щитовой предназначен для измерения силы тока в электрических цепях постоянного тока.
Габаритные размеры - 120×105×59 мм.
Класс точности - 1,5.
Диапазон измерений - от 0 до 100 В.
More info ...
Sales department
Увага!
Due to the large number of incoming orders, in order to speed up their processing, new applications are accepted only at
Email, or via the
, or via the
Ukraine, Lviv
Gorodotskaya, 222
Mon-Fri 8:00 - 18:00
Our works(35)
Installation of the lodgement and the STM-15000U.01 stand
Connecting the brake stand STM-15000U
Connecting a low-profile stand STM-3500MN
Installation of a two-speed stand STM-15000U.01
Work on the installation of the line of maintenance of trucks
Poll
How did you find out about zapadpribor.com?
Products in this category
Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.
The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.
In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.
Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.
We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba, Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.
We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.
The online store takes an active part in such procedures as electronic bidding, tender, auction.
If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.
Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.
While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.
In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.
On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.
All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.
If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.
We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.
We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.