B5-44A B5-44A DC Power Supply B5-44A
4.9 63

DC Power Supply B5-44A (B5 44A, B544A)

Control and manual control, four-wire connection of loads
Vout: 0-30 V, Iout: 0-1 A.
Dimensions: 254h378h93 mm.
Weight: 4.5 kg
Radiometric devices
power supplies, voltage stabilizers (B5-, TES and others)

Available in our warehouse:6 pcs от производителя.

Production under the order: any quantity.

Price

on request

  include VAT

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Technical characteristics

DC Power Supply B5-44A (B5 44A, B544A)

Control and manual control, four-wire connection of loads
Vout: 0-30 V, Iout: 0-1 A.
Dimensions: 254h378h93 mm.
Weight: 4.5 kg
 
DC Power Supply B5-44A power supply designed for RIP constant stabilized voltage and current.
Operating conditions Ambient temperature 5 to 40 ° C, relative humidity 90% at 25 ° C with voltage 220 ​​± 22, barometric pressure 84-106.7 kPa (630-800 mm Hg)
The main areas of application of the device DC Power Supply B5-44A: power systems in the design, manufacture, testing tions and repair of electronic equipment, electronic and electrical products, etc.

    Technical data
Instruments issued continuously adjustable stabilized voltage and constant current in accordance with the Table. 1.
Table 1
Device Type The limit of output voltage, V Limit of setting the output current, A
B5-44A 0-30 V 0-1 A

The basic error of indication of output voltage and output current does not exceed the device;
300 mV for voltage regulation and 3 mA constant current mode.
Line regulation instruments of measurement equation input voltage of ± 10% of nominal value in voltage does not exceed:
± (0,005% U mouth + 0,005% U max) - for the period of measurement (1-10) p.
where U is the mouth - a set value of the output voltage; U max - the maximum value of the output voltage.
Instability of output voltage versus time (drift output voltage) over 8 hours of continuous operation and 10 minutes for any of these do not exceed 8 hours:
± (0,5% U + 0,136 U word max)
Instability of output current versus time (drift output current) for 8 hours of continuous operation and 10 minutes for any of these do not exceed 8 hours:
± (1,0% U mouth + 0,2% U m ax)
Additional error indication of output voltage and output current instruments for variations in ambient temperature of 10 ° C does not exceed the basic error.
Indicating instability of the output voltage and output current of the moisture does not exceed the basic error.
The device DC Power Supply B5-44A provides the ability to control the output voltage of the external analog voltage:
U = U and mouth / K U
where U mouth   - Set the output voltage; U and - control an analog voltage, K U - conversion factor of 1/3 B / B.
The output error voltage to the set does not exceed:
0,5% U mouth +0,1% U max device DC Power Supply B5-44A provides the ability to control the output current of the external analog voltage:
I mouth = U a / K I
where I is the mouth - fixed output current,
U and - control an analog voltage to I - conversion factor of 10.0 V / A.
Error of the output current to the set does not exceed: 1,5% I mouth + 0,2% I max
When programming the output voltage and output current is less than 100 ms. The maximum output voltage (output) when the load current of 0.9 the maximum value to zero and from zero to a maximum value 0.9 in voltage does not exceed:
U out + 2B, where U out - the output voltage of the device
The time setting of the output voltage of a device when the load current of 0.9 the maximum value to zero and from zero to a maximum value 0.9 in voltage does not exceed 100 ms.
Output voltage devices on power off does not go beyond 0 to U mouth by an amount greater than:
1B-2B + + for the device B5-44A;
Devices are protected against overload and short circuit at the output of the device. The instruments provide protection to the load output voltage from exceeding a predetermined level.
Protection level is adjustable: from 3V to 30V for the device B5-44A.
The device DC power supply B5-44A provides the specifications after a setup time of 30 minutes.
Power supply: AC 220V ± 22V voltage frequency (50 ± 0,1) Hz and harmonic content up to 5%. Power input from the mains at the rated voltage and maximum load current is 85 VA. Normal operating conditions and limits shall conform to given in Table .2.
 
Table 2
 
Operating conditions Tempera-
round ° C (K)
The relative
tion humidity,%

Atmospheric
pressure, kPa

(Mm Hg)
The parameter s network
The stress
of, B
Frequency, Hz
Normal 20 ± 5% 30-80

84-106

(630-795)
220 ± 4,4 50
Limit

-50 (223)

+ 60 (333)

95

at t = 25 ° C

84-106.7

(630-800)
- -

The device DC Power Supply B5-44A retains its specifications within the rules set forth above in the working conditions, as well as after exposure to extreme conditions, followed by aging or working conditions for 3 hours
Device DC Power Supply B5-44A allows continuous operation under the operating conditions for 16 hours while maintaining performance. Time to failure for at least 3 hours 5000 10 years lifetime. Gamma-percent life 10,000 h at γ = 90%. Dimensions and weight of the device: in bulk - 254x378x93 mm, 4.5 kg in the packing box - 390x320x150 mm, 6kg, in transport containers - 564x346x262 mm, 9.5 kg.

Photos: B5-44A

B5-44A device image.

B5-44A device image.

B5-44A front view.

B5-44A front view.

B5-44A side view.

B5-44A side view.

B5-44A rear view.

B5-44A rear view.

B5-44A overhead view.

B5-44A overhead view.

B5-44A bottom view.

B5-44A bottom view.

LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

 

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

 

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

 

The company takes an active part in such procedures as electronic bidding, tender, auction.

 

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.