AID-70M AID-70M Apparatus AID-70M.
4.9 63
Apparatus AID-70M (AID70M, AID-70-M, AID 70 M, AID 70M)
Designed to test insulation of power cables rectified voltage and solid dielectric sinusoidal voltage with frequency 50Hz;
Regulation of DC negative polarity (peak value) - 2kV-70kV;
Regulation AC (rms) - 2kV-50kV;
Basic relative error of measurement of voltage:
- Ranging from 10kV to 70kV DC - does not exceed ± 3%;
- In the range of 10 kV to 50 kV AC - does not exceed ± 3%.
 
Electrical measuring instruments
calibrators, compartors, calibration rigs
  • Typical photos 

Available in our warehouse:2 pcs от производителя.

Production under the order: any quantity.

Price

39 999 UAH

include VAT

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Technical characteristics

Apparatus AID-70M (AID70M, AID-70-M, AID 70 M , AID 70M)
 
AID-70M apparatus designed to test insulation of power cables rectified voltage and solid dielectric sinusoidal voltage frequency 50Hz.
The measurement is carried out by applying to the exposure of high-voltage direct object (up to 70kV) or AC voltage (up to 50kV), 50 Hz sine wave with the control current to the load, ranging from tens of microamps.
 
Technical characteristics of the instrument sets AID-70M:
 
The instrument is designed to operate under a canopy or in rooms with working air temperatures from -10 º C to +40 º C and a relative humidity of 80% at +20 º C and atmospheric pressure of 84.0 kPa, 106, 7kPa (630mm.rt.st.-800mm. Hg);
The instrument unit AID-70M provides the intermittent mode;
The device provides a constant output voltage regulation of negative polarity (peak value) - 2kV-70kV;
The device provides output regulation voltage (rms) - 2kV-50kV;
Basic relative error of voltage measurement device unit AID-70M:
- Ranging from 10kV to 70kV DC - does not exceed ± 3%;
- In the range of 10 kV to 50 kV AC - does not exceed ± 3%;
{0}Note{/0}{1}. {/1} The minimum output voltage of the device unit AID-70M ± 1kV 1kV. Its value is determined by the design of the auto-installed in the control panel;
The maximum operating DC system (RMS):
- In the range of voltages from 60 kV to 2 kV - 10 mA;
- In the range of voltages from 60 kV to 70kV - 5mA;
The maximum output power of the device unit AID-70M - 0.6 kVA;
Maximum battery unit in constant current mode - 10 minutes;
Minimum Off time machine device AID-70M - 5 minutes;
Rated working AC system (RMS) in the range from 2 kV to 50 kV - 20 mA;
The maximum time of the device unit AID-70M in AC mode - 1 hour;
Minimum Off time machine - 5 minutes;
Maximum working AC system (RMS) in the range from 2 kV to 40 kV - 50 mA;
The maximum time of the device unit AID-70M in AC mode is:
- When the power delivered to a load of 1.8 kW to 2.0 kW - 1 minute;
- When the power delivered to a load of 1.5 kW to 1.8 kW - 5 minutes;
- When the power delivered to a load of 1.0 kW to 1.5 kW - 10 minutes;
- When the power supplied to the load, up to 1.0 kW - 1 hour;
Basic reduced error of the instrument unit AID-70M Current measurement does not exceed:
- On the main DC current 10mA and 20mA AC - ± 5%;
- On the main AC current from 20mA to 50mA - ± 10%;
- For additional DC current of 1mA and AC 5mA - ± 10%;
The maximum active power consumed by the device apparatus AID-70M from the mains - not more than 2.2 kW;
While ready-to-high voltage (time from the moment the power switch to power on high voltage) - no more than 20 s;
The device has a safety device to disable the high voltage when the output:
- DC voltage value (peak value) - from 70.1 kV to 74.0 kV;
- AC voltage value (rms) - from 50.1 kV to 53.0 kV;
- DC value (current value) - from 10.1 mA to 12.0 mA
- AC values ​​(RMS) - from 50.1 mA to 54.0 mA
Dimensions of various components of the apparatus of AID-70M, not more:
- Remote Control - 415h220h345mm;
- High voltage generator - 390h346h682mm;
Weight of various components of the apparatus of AID-70M, not more:
- Remote Control - 15 kg;
- High voltage generator - 36kg;
Average service life of the device - not less than 10 years;
The manufacturer guarantees that the quality of the device unit AID-70M technical requirements specifications provided the customer terms and conditions of storage, transportation, installation, operation, and its specified operational documentation.

LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

 

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

 

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

 

The company takes an active part in such procedures as electronic bidding, tender, auction.

 

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.