Universal power supply such as UIP-1 (UIP 1, UIP1)
Universal power supply such as UIP-1 is mainly intended to supply the anode, grid and screen circuits radio stabilized DC voltage and filament circuits unregulated AC voltage and can be used both in laboratory and workshop conditions, and in terms of mobile and stationary workshops.
Technical characteristics, power supply, such as UIP-1
UIP-1 device is powered by an AC 220 V Frequency 50 ± 5 Hz.
The device power supply such as UIP-1 provides the following output:
a) stabilized rectified voltage from 20V to 600V at up to 600mA load current and 0 to 400V at a current of 5 mA to the load;
b) unstabilized voltage variables:
Stability of output voltage from 0 to 400 and from 100V to 600V should be no worse than ± 0,5% at any point in the voltage range when the voltage from -15 to +5% of nominal power supply.
Stability of output voltage - positive at any point from 100V to 600V and negative - with a maximum voltage at the output - should be no worse than ± 0,5% at constant supply voltage depending on the load changes from 0 to 600mA and from 0 to 5 mA, respectively .
The value of output voltage ripple at full load does not exceed 0.1%, and at the limit of 20V-150V up to 100 mV.
The value of alternating voltage is different from the nominal value by more than 10% at no-load output and ± 5% of the fully loaded output.
The device power supply such as UIP-1 retains its characteristics at temperatures from -10 to +35 ° C and relative humidity up to 80%.
The power consumed by the device, 1500W.
Unit dimensions 530 x 390 x 325 mm.
Weight about 46 kg.
Photos: UIP-1 (УИП-1)