Radiometric devices >> belongings to the selective voltmeters SMV

TK 14 (ТК 14)

available:
6 pieces
For order is possible effectively delivery of any quantity.

Probe TK 14

Also, this device can be called: TK14, TK-14, тк 14, тк14, тк-14.

TK 14 probe is used to measure asymmetrical interference voltages at high current networks.

Specifications TK 14:

Frequency range - from 0,15 MHz to 30 MHz.

Series resistor - 75 Ohm.

Protective capacitor probes - 5 nF.

Output load 50 Ohm.

The weakening of the test voltage - 20 dB.

Allowable input RF voltage - no more than 4 V.

Voltage at the entrance:

- The maximum - 250 (0 Hz/50 Hz);

- Test - 1500 V (50 Hz).

Quasi-peak measurement range (combination with SMV 11) - from 20 dBmkV to 130 dBmkV.

Basic error (combination with SMV 11) - no more than 2,5 dB.

Type of connection of the probe:

- Input - test clamp A 25 TTL 0-43806.

- Output - high-jack 22-6 on TTL 200-3800 (BNC).

- Protective earth conductor - screw terminals for TTL 0-43806.

Weight - 0,2 kg.

Dimensions - 40x40x100 mm.

Temperature range - from -10° C to +45° C.

The maximum relative humidity - 95%.

Protection class - IP 31 on TGL CMEA 778, protection against dripping water and foreign bodies - not less than 2,5 mm.

The manufacturer provides a guarantee of compliance probe TK 14 all technical requirements if the consumer terms and conditions of use, storage and transportation, installed documentation manuals.

Photos: TK 14 (ТК 14)

TK 14 probe image.
TK 14 probe image.
TK 14 probe image.
TK 14 probe image.
TK 14 front view.
TK 14 front view.
TK 14 rear view.
TK 14 rear view.
TK 14 overhead view.
TK 14 overhead view.


Яндекс цитирования