Discount up to 50% on the panel devices.

Laboratory equipment >> metal hardness testers

TDM-3 Dynamic hardness TDM-3.


It is possible effectively delivery of any quantity.
Dynamic hardness TDM-3 (TDM3, TDM 3)
Dynamic hardness TDM-3 is designed to measure the hardness of structural and carbon steels, stainless steels and alloys and non-ferrous metals in the laboratory, shop and field conditions.
Hardness can be used for grading of various materials on the elastic properties with additional scales that are available in the device.
Technical characteristics of the devices dynamic hardness TDM-3:
Range of hardness measurements - 20HRC-70HRC, 90HB-450HB, 400HV-875HV, 30HSD-99, 9HSD;
The maximum permissible errors of test loads - ± 2,0 HRC, ± 15HB, ± 15HV, ± 3HSD;
The resolution of the device dynamic hardness TDM-3 - 0,1 HRC, 1,0 HB, 1,0 HV, 0,1 HSD;
Number of hardness scales - 14;
Number of hardness scales, major (HRA, HRB, HRC, HB, HV, HRN, HRT, HSD, HSC, HL) - 10;
Number of hardness scales instrument dynamic hardness TDM-3, additional (SP1-SP4) - 4;
Maximum angle converter - 180 º;
Number of averaged single measurement instrument dynamic hardness TDM-3 - 2-99;
Operating temperature range - from -10 º C to +50 º C;
Electrical power tool battery dynamic hardness TDM-3 - 2.4 V;
Continuous operation time - at least 25 hours;
Environmental protection dynamic hardness TDM-3 - IP 65;
Size - no more 143h85h35mm;
Dimensions of the unit converter dynamic hardness TDM-3 - no more than the diameter 20h100mm;
Weight - not more than 0.4 kg;
Features of the device dynamic hardness TDM-3:
- Calibration standards to measure the hardness of any non-porous material (the number of required standards 2-5);
- Automatic correction of readings, depending on the device inserted in the angle of the transducer;
- Mode of the "experiment" for laboratory tests;
- Mode of single or multiple measurements;
- Grading of materials and products in hardness;
- Internal memory and access to a personal computer (port USB);
- Battery powered and low battery level control;
The apparatus dynamic hardness TDM-3:
- The electronic unit;
- The converter cable;
- Battery pack (built-in);
- Charger;
- The cable connecting the PC / electronics;
- The diskette with the software;
- Spare indenter carbide-tipped (surcharge);
- Cover for electronics;
- Verification procedure;
Vehicle Operation Manual
- Carrying Bag;
The manufacturer guarantees that the quality of the device dynamic hardness TDM-3 technical requirements specifications provided the customer terms and conditions of storage, transportation, installation, operation, and its specified operational documentation.