Discount up to 50% on the panel devices.

Measuring tools, gauges >> caliper gauge (ShTs-, ShR-, ShTsTs- and others) >> Calipers measuring (ShTs, ShTsK, ShTsTs) >> electronic (ShTsTs-1, ShTsTs-2, ShTsTs-3) >> type 3 (III) (ShTsTs-3)

SHCC-3-1500 0,01mm sponge 150mm Caliper SHTSTS-3-1500 0.01 mm sponge 150mm electronic.

SHCC-3-1500 0,01mm sponge 150mm

It is possible effectively delivery of any quantity.
Caliper SHCC-3-1500 0.01 mm 150 mm sponge electronic (SHCC31500, SHCC 3 1500, SHCC-3 1500, SHCC 3-1500)
Caliper SHCC-3-1500 0.01 mm 150 mm sponge email is designed to measure external and internal dimensions.
Caliper performs the following functions:
- Issuance of digital information in a direct code (with the sign and absolute value);
- Set the origin in the absolute coordinate system;
- Pre-installation of zero;
- The ability to measure quantities in both millimeters and inches;
- Display of measurement results to external devices (via serial interface RS232).
Details calipers are made of corrosion resistant steel or have a reliable anti-corrosive coating.
Scale bar and have a vernier satin chrome finish, eliminating glare.
This caliper type III - a one-sided.
Also caliper SHTSTS-3-1500 0.01 mm 150 mm sponge may be referred to the electronic:
- SHCC-1500 0.01 mm 150 mm sponge type 3, III, iii;
- SHCC-III-1500 0.01 mm 150 mm sponge;
- SHCC-iii-1500 0.01 mm 150 mm sponge.
Product Specifications Calipers SHCC-3-1500 0.01 mm 150 mm sponge electronic:
Size caliper products SHCC-1500 0.01 mm sponge 150mm e - 1500mm;
Step discrete digital reading device - 0.01 mm;
Caliper SHCC-3-1500 0.01 mm sponge 150mm E - is a tool that consists of a stiff metal ruler, called the bar, a frame with a vernier and measuring jaws;
With the help of a special screw is fixed to the risks of the line. Measuring the sponge can be upper and lower. The upper jaws are required to perform internal measurements, most often it is the hole in the details, the lower jaw are used for the external dimensions of products;
On the product caliper SHCC-1500 0.01 mm 150 mm sponge email is very easy to work with.In the process of measuring the lower jaw to the side of divorce, the jaws have a piece, and then have to move the jaw to lock. In the process of measuring the shift in the upper jaw parts, after entering into the hole, which is measured, and there is disclosed a sponge;
Working with an electronic caliper product SHCC-3-1500 0.01 mm 150 mm sponge should try to keep the tool perpendicular to the details, then the sponge will fall close to the surface of the measurand.According to the main scale and vernier are the results of measurements;
The product is indispensable for some problems of measurement;
The manufacturer guarantees the product quality caliper SHCC-1500 0.01 mm 150 mm sponge electronic technical requirements specifications, subject to the consumer the terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.