Discount up to 50% on the panel devices.

Measuring tools, gauges >> caliper gauge (ShTs-, ShR-, ShTsTs- and others) >> Calipers measuring (ShTs, ShTsK, ShTsTs) >> mechanical Calipers (ShTs-1, ShTs-2, ShTs-3) >> type 1 (I) (ShTs-1)

SHC-1-200 0,05mm (0,02mm) Caliper ShTs-1-200 0.05 mm (0.02 mm).

SHC-1-200 0,05mm (0,02mm)

1 599 RUB
533 UAH

Online prices include VAT.

It is possible effectively delivery of any quantity.
Caliper SHC-1-200 0.05 mm (0.02 mm) (SHC1200, SHC 1 200, SHC-1 200, SHC 1-200)
Caliper SHC-1-200 0.05 mm (0.02 mm) are designed to measure external and internal dimensions.
Details calipers are made of corrosion resistant steel or have a reliable anti-corrosive coating.
Scale bar and have a vernier satin chrome finish, eliminating glare.
This caliper Type I - two with the depth gauge.
Also caliper ShTs-1-200 0.05 mm (0.02 mm) may be indicated:
- SHC-200 0.05 mm (0.02 mm) Type 1, I, i;
- SHC-I-200 0.05 mm (0.02 mm);
- SHC-i-200 is 0.05 mm (0.02 mm).
Product Specifications Calipers SHC-1-200 0.05 mm (0.02 mm):
Size caliper products SHC-200 0.05 mm (0.02 mm) - 200mm;
The graduation - 0.05 mm (0.02 mm);
Caliper SHC-1-200 0.05 mm (0.02 mm) - a tool that consists of a stiff metal ruler, called the bar, a frame with a vernier and measuring jaws.At the bar there are markings with a scale of 0.5 mm, and the vernier scale interval - 0.02 mm;
With the help of a special screw is fixed to the risks of the line. Measuring the sponge can be upper and lower. The upper jaws are required to perform internal measurements, most often it is the hole in the details, the lower jaw are used for the external dimensions of products;
The product has a built-in depth gauge;
On the product caliper SHC-200 0.05 mm (0.02 mm) is very easy to work with.In the process of measuring the lower jaw to the side of divorce, the jaws have a piece, and then have to move the jaw to lock. In the process of measuring the shift in the upper jaw parts, after entering into the hole, which is measured, and there is disclosed a sponge;
Working with the product caliper SHC-1-200 0.05 mm (0.02 mm) must try to keep the tool perpendicular to the details, then the sponge will fall close to the surface of the measurand.According to the main scale and vernier are the results of measurements;
The product is indispensable for some problems of measurement;
The manufacturer guarantees the product quality caliper SHC-200 0.05 mm (0.02 mm) with the technical specifications in compliance with the conditions of the consumer terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.