S1-108 (C1-108) S1-108 (C1-108)
4.9 63

S1-108 universal oscilloscope is used to investigate the continuous and pulse shapes, including rarely repeated single signals and voltages in the range from 20 mV to 8 V and lengths ranging from 7 ns to 100 ms by visual observation and photography.

Accuracy class - 2.

Rise time Ss - not more than 1 ns.

The range of the internal clock frequency of a harmonic signal - to 50 Hz; from 350 MHz.

Radiometric devices
oscilloscopes (S1-, S7-, S8-, S9-, Ya40-, Ya4S-, Ya9S- and others)

Price:

on request

 

Product information updated 11 December 2023.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Product information updated 11 December 2023.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Technical characteristics

Universal oscilloscope S1-108

Also, this device may be referred to: S1108, S1 108, c1-108, c1108, c1 108.

 

S1-108 universal oscilloscope is used to investigate the continuous and pulse shapes, including rarely repeated single signals and voltages in the range from 20 mV to 8 V and lengths ranging from 7 ns to 100 ms by visual observation and photography.

 

Specifications S1-108:

 

Accuracy class - 2.

Oscilloscope channels - 1.

Effective screen - 80×100 mm.

The line width of each beam - not more than 0,8 mm.

 

Recording speed (RF-3):

- sensitivity - 1200 I/X-ray;

- relative aperture of 1:1,5 lens - not less than 2000 km/s;

- the lens aperture with 1:2 - not less than 1200 km/s.

Coefficient of variation of channel S1-108 - 10 mV/div to 1 V/div (or series of numbers 1, 2, 5).

 

Error deflection factors:

- basic - no more than 2%;

- in the range of each influence quantity in the working conditions of use - no more than 2,5%.

 

Basic measurement error voltage - no more than (0,5×10 1/n)%,

where n - the size of the image of the measured voltage in scale divisions (in centimeters) of the oscilloscope screen:

- by direct inlet in the range from 20 mV to 8 V;

- active probe in the range from 20 V to 4 V;

- a remote 1:10 divider between 200 mV to 10 V.

 

Basic measurement error voltage - no more than (2,5+10/n)%:

- 1:50 with external divider between 500 mV to 25 V.

 

Voltage measurement error S1-108 in the range of each influence quantity in the working conditions of application of the direct input:

- with an active probe and external divider 1:10 - no more (1,2+0,5·10/n)%;

- with external divisors 1:50 - (3+10/n)%.

 

Surge characteristic oscilloscope

 

Rise time:

- direct input and external divider transmission factor 1:10, 1:50 - less than 1 ns;

- with an active probe - 1,5 ns.

 

Emissions S1-108:

- direct input and external divider 1:10 1:50 - no more than ±5%;

- with an active probe - 7%.

 

Settling time:

- with direct input - no more than 5 ns;

- with an active probe - not more than 8 ns;

- with external divider 1:10, 1:50 - no more than 20 ns.

 

Irregularity in the area of establishing:

- with direct input - 5%;

- with an active probe and external divider 1:10, 1:50 - 7%.

 

Uneven with direct input:

- in the area of up to 100 ns - 2%;

- in the area from 100 ns to 100 ms - 1,5%.

 

Uneven with an active probe and external divider 1:10, 1:50:

- in the area of up to 100 ns - 3%;

- in the area from 100 ns to 100 ms - 2%.

Distortion DC - no more than 2%.

 

The drift of convergence at the screen S1-108:

- long-term drift - not more than 5 mm/h;

- short-term drift - less than 2 mm.

Periodic and random deviations from the active probe - not more than 2 mV.

 

Offset ray oscilloscope:

- when the voltage supply by 10% - less than 2 mm;

- at an input current - no more than 3 mm.

The limits of vertical movement of the beam - at least ±80 mm.

 

Parameters input channel vertical deflection

 

With direct input:

- input impedance - 50±1 Ohm;

- reflectance - no more than 10%.

 

With external divider 1:10:

- input impedance - 500±5 Ohm;

- input capacity - not more than 1 pF;

 

With external divider 1:50:

- input resistance - 2500±25 Ohm;

- input capacity - not more than 1 pF;

 

With an active probe:

- input impedance - 100±5 kOhm;

- input impedance divider 1:10 - 1±0,05 MOhm;

- input capacity - not more than 4 pF;

- input capacitance divider 1:10 - no more than 2,5 pF.

 

Picture delay signal S1-108 - not less than 12 ns.

Scan rate range (stepwise series of numbers 1, 2, 5 respectively) - from 1 ns/div to 10 ms/div.

 

Basic error coefficients sweep the work area sweep:

- from 10 ns/div to 10 ms/div - no more than 2%;

- from 1 ns / div to 5 ns/div - no more than 4%.

 

Voltage measurement error in the range of each influence quantity in the working conditions of use:

- from 10 ns/div to 10 ms/div - 2,5%;

- from 1 ns/div to 5 ns/div - 5%.

 

The basic error of S1-108 measuring time intervals within the working area sweep:

- from 10 ns/div to 10 ms/div - not more than (0,5×0,4·10/l)%,

where l - image size measured time interval in ticks (in centimeters) screen scale;

- from 1 ns/div to 5 ns/div - no more than (2+10/l)%.

 

Error of measurement of time intervals in the range of each influence quantity in the working conditions of use:

- from 10 ns/div to 10 ms/div - not more than (0,7×0,4·10/l)%;

- from 1 ns/div to 5 ns/div - no more than (2,5+10/l)%.

 

Frequency measurement error - no more than ±1 on the error measure time intervals.

Limits of movement of the horizontal beam - at least ±50 mm.

 

Internal synchronization:

 

Frequency range S1-108 of the harmonic signal - to 50 Hz; from 350 MHz.

 

Minimum level in the frequency range of the harmonic signal oscilloscopes:

- up to 50 Hz; from 100 MHz (pulse duration - 5 ns) - 8 mm;

- up to 100 MHz; from 350 MHz - 20 mm.

 

The maximum level of the frequency range of harmonic signals:

- up to 50 Hz; from 100 MHz (pulse duration - 5 ns) - 80 mm.

Instability sync - no more than 0,05+0,1/Csnom cases where

Csnom - nominal value of the set sweep rate.

 

External synchronization S1-108

 

Harmonic signal frequency range - up to 50 Hz; from 350 MHz.

 

Minimum level in the frequency range of the harmonic signal oscilloscope:

- up to 50 Hz; from 100 MHz (pulse duration - 5 ns) - 100 mV;

- up to 100 MHz; from 350 MHz - 200 mV.

 

The maximum level of the frequency range of harmonic signals:

- up to 50 Hz; from 100 MHz (pulse duration - 5 ns) - 3 V.

Instability sync - no more than 0,05+0,1/Csnom div.

 

Built-in calibrator

 

External load S1-108 - 50±1 Ohm.

 

Meander signal:

- repetition period - 10±0,01 ms;

- amplitude - 0,5±0,0025 B.

 

Harmonic signal:

- repetition period - 10±0,02 ns;

- amplitude - not less than 0,1 V.

 

Mode Tags

 

Number of measuring marks - 2 (reference and a reading).

 

Limit the scale of S1-108:

- vertical - at least ±40 mm;

- horizontally - of at least ±50 mm from the center of the screen.

 

Movement of the bearing with respect to the reference mark:

- vertically - from 73 mm to 80 mm;

- horizontally - from 95 mm to 100 mm.

Level accuracy of the test signal "0,1", "0,5", "0,9" - no more than 1% of the level set to "1".

 

Geometric distortion on the borders of the scale of the CRT screen:

- horizontal - not more than 3%;

- vertical - not more than 2%.

Orthogonality error S1-108 - not more than 1°.

 

Modes scans - autooscillation, waiting, single.

Calculation of percentages provided two units with digital display of results on the scoreboard.

Warm-up time - 15 minutes.

Dimensions - 526×200×304 mm.

Weight - no more than 17 kg.

 

Operating conditions S1-108:

 

Ambient temperature:

- operating - from 5° C to 40° C;

- limit - from -50º C to +60° C.

 

Relative humidity at 30° C:

- working - up to 85%;

- limit - up to 95%.

 

Mains voltage - 220±22 V.

Frequency - 50±0,5 Hz, 60 Hz.

 

Power consumption oscilloscopes:

- at rated voltage - no more than 110 V·A;

- with an active probe included - no more than 110 V·A.

 

MTBF device S1-108 - not less than 4000 hours.

Lifetime (80%) - 10 years.

Resource (80%) - 10 000 h.

 

Shelf life (50%):

- in a heated room - 7 years;

- in an unheated room - 5 years.

Rate the product: S1-108 (C1-108)
Number of views: 1972
Product rating: 4.6
Number of grades: 351
* rating and all product statistics are updated once a month; information is current as of 28 December 2023

Photos: S1-108 (C1-108)

S1-108 (C1-108) oscilloscope image.

S1-108 (C1-108) oscilloscope image.

S1-108 (C1-108) front view.

S1-108 (C1-108) front view.

S1-108 (C1-108) side view.

S1-108 (C1-108) side view.

S1-108 (C1-108) rear view.

S1-108 (C1-108) rear view.

S1-108 (C1-108) side view.

S1-108 (C1-108) side view.

S1-108 (C1-108) overhead view.

S1-108 (C1-108) overhead view.

S1-108 (C1-108) bottom view.

S1-108 (C1-108) bottom view.

S1-108 (C1-108) oscilloscope scheme.

S1-108 (C1-108) oscilloscope scheme.

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.