S1-107 S1-107 ScopeMeter C1-107.
4.9 63
Oscilloscope, multimeter S1-107 (S1107, S-1-107, S 1107, S1-107, S 1107, S1 107, c1107, c-1-107, c 1107, c 1107, c1 107)
Intended to:
- To study the form of electrical signals in the frequency range of 5MHz to 0MGts by visual observation and measurement of their amplitudes in the range from 0.02 V to 120 V (with external divider 1:10 to 350V) and the time intervals of 0,4 ∙ 10 -6 s to 1.0 s in the oscilloscope mode;
- To measure the DC voltage of 1 ∙ 10 -3 V to 1000V, AC 1 ∙ 10 -3 g of 300V DC power from 1 ∙ 10 -6A to 1.999 A, the activity of the resistivity in the range of 1 ∙ 10 -3ohm-1999 ohms in the mode of the meter;
The working part of the screen - 60h40mm;
The basic error of the calibrated coefficients of vertical deviation (0.01 V / div, 0.02 V / div, 0.05 V / div and 0.1 V / div and 0.2 V / div and 0.5 V / div; 1V/del, 2B / Affairs; 5V/del; 10V/del; 20V/del) - no more than 8%.
Radiometric devices
oscilloscopes (S1-, S7-, S8-, S9-, Ya40-, Ya4S-, Ya9S- and others)
S1-107 ScopeMeter C1-107.

Price:

on request

 

Product information updated 13 December 2023.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Product information updated 13 December 2023.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Technical characteristics

Oscilloscope, multimeter S1-107 (S1107, S-1-107, S 1107, S1-107, S 1107, S1 107, c1107, c-1-107, c 1107, c 1107, c1 107)
 
Oscilloscope, multimeter S1-107 is:
- To study the form of electrical signals in the frequency range of 5MHz to 0MGts by visual observation and measurement of their amplitudes in the range from 0.02 V to 120 V (with external divider 1:10 to 350V) and the time intervals of 0,4 ∙ 10 -6 s to 1.0 s in the oscilloscope mode;
- To measure the DC voltage of 1 ∙ 10 -3 V to 1000V, AC 1 ∙ 10 -3 g of 300V DC power from 1 ∙ 10 -6 A to 1.999 A, the activity of the resistivity in the range of 1 ∙ 10 -3 ohm-1999 ohms in the mode of a multimeter.
The device is an oscilloscope, multimeter S1-107 is performed in two ways:
- Table - drawing designation I22.044.088-01;
- To work in field conditions - symbol drawing N22.044.088.
 
Technical characteristics of the devices, multimeters oscilloscope S1-107:
 
The working climate the device are:
- Ambient temperature - from -30 ° C to +30 ° C;
- Relative humidity - up to 98% at +35 ° C;
- Atmospheric pressure - from 60kPa to 104kPa (from 460 mm. Hg. Art. 780 mm. Hg. Art.);
The working part of the device screen oscilloscope, multimeter S1-107:
- 60mm (10 divisions, the price of division 6 mm) horizontal;
- 40 mm (6 and 2 / 3 divisions, the price of division 6 mm) vertically;
The line width of the beam oscilloscope Multimeter instrument S1-107 - less than 0.8 mm;
The basic error of the calibrated coefficients of vertical deviation (0.01 V / div, 0.02 V / div, 0.05 V / div and 0.1 V / div and 0.2 V / div and 0.5 V / div; 1V/del, 2B / Affairs; 5V/del; 10V/del; 20V/del) - no more than 8%;
The error coefficient of variation instrumentoscilloscope, multimeter S1-107 in the range of influence quantity - no more than 12%;
Coefficient of variation is adjustable with an overlap of at least 2.5-fold;
Step response time channel oscilloscope vertical deflection device- S1-107 multimeter with direct input with the remote and 1:10 divider - not more than 70ns;
Emission characteristics of a transitional path in vertical position with the direct input and with external divider 1:10 - no more than 5%;
The time for establishing the transition channel performance in vertical position with the direct input and with external divider 1:10 - no more than 210ns;
The uneven top of the unit step response oscilloscope, multimeter S1-107 - less than 3%;
The decline of the transient characteristic peaks of the test pulse of 10 ms with a closed input - no more than 10%;
The bandwidth of the vertical deflection channel oscilloscope Multimeter instrument S1-107 - from 0MGts to 5 MHz;
The uneven frequency response in the normal frequency range of 1MHz-0MGts - no more than 8% compared to the reference frequency of 1 kHz;
The drift of the line scan path vertical deflection after the time of an operating mode - no more than:
- Short - 1 mV;
- Long term - 5mV / h;
The displacement of the beam oscilloscope Multimeter instrument S1-107 due to the input current - not more than 5mV;
H a scanning line can be observed both synchronous and unsynchronized interferences from the mains frequency, transmitter and other noises.Their magnitude should not exceed 1 mV (0.1 division) and is defined as the maximum deflection of the beam (or the release of Padina) from a horizontal line;
Limits of movement in the vertical beam - at least two values ​​of the nominal vertical deflection;
Parameters of vertical deflection of the instrument channel oscilloscope, multimeter S1-107:
- Input resistance - 1 MW ± 0,02 MW in parallel with 35pF ± 5pF with direct inlet;
- Input resistance - 1 MW ± 0,02 MW in parallel with no more than 13pF with an external divider 1:10;
Restricted to the total value of the DC and AC voltage device oscilloscope, multimeter S1-107 at the closed entrance channel vertical deflection no more than:
- 200V by direct inlet;
- 350V with external divider 1:10;
The delay in the path of the image signal is the vertical deflection device oscilloscope Multimeter S1-107 provides a view of the front of the signal on the working part of the sweep;
Footnote. Working part sweep is 10 divisions stretch from the beginning of the exception to the initial section of length 0.2 cases;
Sweep generator provides the following modes of operation of the device oscilloscope, multimeter S1-107:
- Self-oscillation;
- Waiting.
The basic error of the calibrated sweep (0.1 microseconds / div, 0.2 ms / div, 0.5 ms / div; 1mks/del; 2mks/del; 5mks/del; 10mks/del; 20mks/del; 50mks/del; 100mks / Affairs; 200mks/del; 500mks/del, 1 ∙ 10 3 ms / div, 2 ∙ 10 3 ms / div, 5 ∙ 10 3 ms / div, 1 ∙ 10 4 microseconds / div, 2 ∙ 10 4 microseconds / div; 5 ∙ April 10 ms / div, 1 ∙ 10 5 ms / div) - no more than 8%;
Accuracy of calibrated sweep in the range of influence quantity - no more than 12%;
Duration of scanning device oscilloscope, multimeter S1-107 is adjustable for each band with an overlap of at least 2.5-fold;
Limits movement of the beam in the horizontal alignment should provide the beginning and end of the working part of the sweep center of the screen;
Coefficient of variation channel horizontal deflection - no more 1V/del;
The input resistance of the entrance channel horizontal deflection - not less than 30 ohms in parallel with no more than 30pF;
Internal synchronization device oscilloscope, multimeter S1-107 by sinusoidal signals in the frequency range from 1 Hz to 5 ∙ 10 6 Hz and pulse duration of both polarities from 0.3 s to 1 ∙ 10 6 microseconds;
The height of the image from a minimum value equal to no more than 0.6 division in the range of 1 Hz to 1 ∙ 10 6 Hz and 1 division to 5 ∙ 10 6 Hz to a maximum of 6 divisions;
Instability start scanning device oscilloscope, multimeter S1-107 - less than 10 ns;
In the oscillatory regime sweep the lower frequency sweep run no more than 100 Hz;
External clock sweep by sinusoidal signals in the frequency range from 1 Hz to 5 ∙ 10 6 Hz and pulse signals of both polarities duration from 0.3 s to 1 ∙ 10 6 microseconds with an amplitude of 0.5 V to 50 V;
Instability start scanning - no more than 10 ns;
In the oscillatory regime sweep the lower frequency sweep run - less than 100 Hz;
Options Genlock input device oscilloscope, multimeter S1-107 (open):
- Input resistance nests "0.5-5" - no less than 30 ohms in parallel with no more than 30pF;
- Input resistance nests "5-50" - not less than 650 ohms in parallel with no more than 10 pF;
The internal voltage source generates a calibrated U-shaped pulses with a repetition rate of 1 kHz and an amplitude of 1 V;
The main error of the amplitude and pulse frequency oscilloscope calibrator instrument meter- S1-107 - less than 2%;
Accuracy of the amplitude and pulse frequency of the calibrator in the range of influence quantity - less than 3%;
Geometric distortion - less than 3%;
 
Meter Mode
 
The choice of type and extent of the measurement instrument oscilloscope, multimeter S1-107 is performed manually by a switch type of work («R, -, ~») and a pen full scale (combined with an attenuator knob);
When measuring voltage or DC power, determination and polarity indication is done automatically;
In the measurement of electrical quantities, whose values ​​exceed the final value of the selected limit is indicated by the sign "P";
Indication of commas, depending on the position of the switch device limit oscilloscope, multimeter S1-107 corresponds to Table 1;
 
Table 1
Switch position full scale
Point position
0.2
, 0000
"2"
0.000
{0}{1}20%{/1}{/0}
- 00 00
200
000.0
2000
0000
 
Measuring range of DC voltage 1 ∙ 10 -3 V-1000 V, is divided into sub-bands, "0.2", "2", "20", "200", "2000";
Measuring range AC 1 ∙ 10 -3 V-300B, is divided into sub-bands, "0.2", "2", "20", "200", "2000";
When measuring the AC unit oscilloscope, multimeter S1-107 retains its essential characteristics after exposure to handling stress in 1 minute:
- 10 times the limit of "0.2", "2", "20";
- 5 times the limit of "200";
- 1.1-fold at the limit of "2000";
Range of measuring the strength of the DC 1 ∙ 10 -6 A-1, 999A is divided into sub-bands, "0.2", "2", "20", "200", "2000";
When measuring DC power unit oscilloscope, multimeter S1-107 retain their essential characteristics of the limits established by TU, after exposure to handling current for 1 minute:
- 10 times - at the limits of "0.2", "2", "20";
- 1.2-fold - to the limit of "200";
- 1.1-fold - to the limit of "2000";
Resistance measurement range 1 ∙ 10 -3 ohm ohm-1999 is divided into sub-bands, "0.2", "2", "20", "200", "2000";
The input resistance of the device oscilloscope, multimeter S1-107 in the measurement of DC and AC power is not less than 10 MW;
Input capacity - up to 100 pF;
Average Power in the measured resistance - less than 1 mW;
 
General data of the instrument oscilloscope, multimeter C1-107
 
Adjusting the brightness of the image brightness changes ensures the total absence to a convenient for observation;
Electrical isolation between the input power supply circuit network cable and the housing unit ^ withstand without breakdown withstand voltage AC, 50 Hz, the effective value of which corresponds to:
- 1500V in normal conditions;
- 900V in wet conditions;
Operation mode setup time oscilloscope Multimeter instrument S1-107 - less than 5 minutes;
Allowed continuous operation of the oscilloscope, multimeter in working conditions within 16 hours;
The device is an oscilloscope, multimeter S1-107 is powered by:
a) AC 220V ± 22V 50Hz ± 0,5 Hz and 60 Hz ± 0,5 Hz and harmonic content up to 5%;
b) AC voltage 115 V ± 5,5 V and 220 V ± 11 V with a frequency of 400 Hz ± 12Gts and harmonic content up to 10%;
c) DC voltage of 27V ± 2,7 V;
The power consumed by the device oscilloscope S1-107 multimeter on AC, with rated voltage not more than 25 V ∙ A;
The current consumed by the DC current at a voltage of 27 V must not exceed 0.6 A;
Working hours instrument oscilloscope Multimeter S1-107 waiver - 1500 hours;
Average life - at least 10 years of age;
Average life - 10,000 hours;
Overall dimensions oscilloscope, multimeters S1-107 - 245X111X360mm;
Dimensions of laying the box - no more 530X246X302mm;
Dimensions of container box - no more 729X369X443mm;
Weight of the device - no more than 4 kg;
Weight with box - no more than 4.5 kg;
The mass of the oscilloscope, multimeter laying box - no more than 15kg;
Unit weight oscilloscope, multimeter S1-107 to transport container and laying box - no more than 35kg;
Weight of the device with transport container and with the box - no more than 25kg.
Rate the product: S1-107
Number of views: 1681
Product rating: 4.7
Number of grades: 283
* rating and all product statistics are updated once a month; information is current as of 28 December 2023

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.