Oscilloscope radio fancier N3015 (N 3015, N-3015)
Designed for visual inspection of electrical processes, measuring time intervals, AC and DC voltages.
Dimensions of the working of the screen 30x40mm.
The channel provides a vertical deflection: the range of values of the coefficient of deviation from 1x10 -3 to 20V/del.
Channel horizontal deflection provides a range of values sweep of 0.04 × 10 -6 to 0.2 s / div.
Synchronization frequency range from 20 to 10x106Gts.
Oscilloscope radio fancier N3015 are designed for visual observation of electrical processes, measuring time intervals, AC and DC voltages.
1. ambient temperature from 10 to 35 ° C;
2. relative humidity up to 80% at 25 ° C;
3. atmospheric pressure (84 - 106.7) kPa;
4. mains voltage (220 ± 22), line frequency (50 ± 1) Hz or (60 ± 1,2) Hz, with harmonic content of up to 5%.
Normal conditions of use:
1. ambient temperature (20 ± 5) ° C;
2. relative humidity (30-80)%;
3. atmospheric pressure (84 - 106.7) kPa;
4. mains voltage (220 ± 4,4) V ¬ ing frequency of the supply network (50 ± 1) Hz or (60 ± 1,2) Hz, at harmonic content of up to 5%.
Oscilloscope ham N3015 provides simultaneous monitoring of two different signals by connecting a switch-type P323. Dimensions of the working of the screen 30x40 mm (7.5 divisions in the vertical and 10 horizontal divisions).
The line width of the beam does not exceed 0.7 mm. When set to "1" gain switch mV / div allowed beam width of 2 mm.
Vertical position of the channel provides:
the range of values of the coefficient of deviation from 1x10 -3 to 20V/del;
Maximum permissible error of the instrument N3015 when measuring voltages on a grand scale from 5 mV to 150V no more than ± 12% at a frequency of 1 kHz;
frequency response with respect to the frequency of 1 kHz to 2 MHz frequency band up to no more than ± 12% in the frequency band above 2MHz to 10MHz to 40% - on the "x1000" input attenuator frequency response above 20kHz is not standardized;
Long-term drift of the beam up to 30 mV / h;
Input resistance is not less than 0.45 MΩ;
inbound capacity not exceeding 50 pF;
allowable total value of DC and AC voltagetion gated entrance not more than 500V, with maximum amplitude of the AC voltage 300V.
Channel horizontal deflection provides:
waiting and self-oscillating modes of scanning;
range of sweep from 0.04 × 10 -6 to 0.2 s / div;
Maximum permissible error of the instrument N3015 measurement of time intervals ranging from 2 ms to 2 with no more than ± 12%;
inner and outer sweep synchronization signals of positive and negative polarity and synchronization network;
synchronization frequency range from 20 to 10x106Gts;
External synchronization voltage sweep from 0.5 to 5V.
When measuring the voltage and time intervals, the limit of additional error N3015 appliance, rejecting the supply voltage of ± 10% of normal or ambient temperature deviations of ± 10 ° C from the normal value should be equal to half the value of the maximum permissible primary
Power consumption 30 VA. Dimensions 285 x 85 x 315 mm. Unit weight N3015 no more than 4 kg. Information of precious materials in the device N3015: Gold - 0,123 g, silver - 0.89 g
|Sales departments LLC "Zapadpribor"
|1008 RUB||in stock:||4195 RUB||in stock:|
|370 UAH||5781 pieces||1145 UAH||20 pieces|
|1328 RUB||in stock:||4195 RUB||in stock:|
|487 UAH||2640 pieces||1145 UAH||23 pieces|
|1014 RUB||in stock:||5000 RUB||in stock:|
|372 UAH||2784 pieces||1250 UAH||15 pieces|
|2213 RUB||in stock:||5680 RUB||in stock:|
|487 UAH||1635 pieces||1420 UAH||18 pieces|
|1109 RUB||in stock:||5380 RUB||in stock:|
|394 UAH||3143 pieces||1345 UAH||21 pieces|
Built-in printer and a keyboard, memory, transfer data to a computer
Wheatstone bridge, resistance box measure, the resistance coils:
Attention! Delivery of all instruments, which are listed on the site, is on the whole territory of the following countries: Russia, Ukraine, Belarus, Kazakhstan and other CIS countries.
According to Russia, there is an established system of delivery to cities: Moscow, St. Petersburg, Surgut, Nizhnevartovsk, Omsk, Perm, Ufa, Norilsk, Chelyabinsk, Novokuznetsk, Cherepovets, Almetyevsk, Volgograd, Lipetsk, Magnitogorsk, Togliatti, Kogalym Kstovo New Urengoy Nizhnekamsk, Nefteyugansk, Nizhny Tagil, Khanty-Mansiysk, Yekaterinburg, Samara, Kaliningrad, Nadym, Noyabrsk, Vyksa, Nizhny Novgorod, Kaluga, Novosibirsk, Rostov-on-Don, Upper Pyshma, Krasnoyarsk, Kazan, Naberezhnye Chelny, Murmansk, Vsevolozhsk Yaroslavl, Kemerovo, Ryazan, Saratov, Tula, Usinsk, Orenburg, Novotroitsk, Krasnodar, Ulyanovsk, Izhevsk, Irkutsk, Tyumen, Voronezh, Cheboksary, Neftekamsk, Novgorod, Tver, Astrakhan, Novomoskovsk, Tomsk, Prokopyevsk, Penza, Urai, Pervouralsk , Belgorod, Kursk, Taganrog, Vladimir, Neftegorsk, Kirov, Bryansk, Smolensk, Saransk, Ulan-Ude, Vladivostok, Vorkuta, Podolsk, Krasnogorsk, Novouralsk, Novorossiysk, Khabarovsk, Zheleznogorsk, Kostroma, Zelenogorsk, Tambov, Stavropol, Svetogorsk, Zhigulevsk , Arkhangelsk and other cities of the Russian Federation.
Ukraine has a well-established on the delivery system in the cities: Kiev, Kharkov, Dnepr (Dnepropetrovsk), Odessa, Donetsk, Lviv, Kiev, Nikolaev, Lugansk, Vinnitsa, Simferopol, Kherson, Poltava, Chernihiv, Cherkasy, Sumy, Zhytomyr, Kirovohrad, Khmelnytsky, Rivne, Chernivtsi, Ternopil, Ivano-Frankivsk, Lutsk, Uzhgorod and other cities of Ukraine.
On Belarus there organized system of delivery to cities: Minsk, Vitebsk, Mogilev, Gomel, Mozyr, Brest, Lida, Pinsk, Orsha, Polotsk, Grodno, Zhodino Molodechno and other cities of Belarus.
In Kazakhstan there is an established system of delivery to cities of Astana, Almaty, Ekibastuz, Pavlodar, Aktobe, Karaganda, Uralsk, Aktau, Atyrau, Arkalyk, Balkhash, Zhezkazgan Kokshetau Kostanai, Taraz, Shymkent, Kyzylorda, Lisakovsk, Shakhtinsk, Petropavlovsk, reader, Ore, Families, Taldykorgan, Temirtau, Ust-Kamenogorsk and other cities of Kazakhstan.
Ongoing delivery of devices to such countries: Azerbaijan (Baku), Armenia (Yerevan), Kyrgyzstan (Bishkek), Moldova (Chisinau), Tajikistan (Dushanbe), Turkmenistan (Ashgabat), Uzbekistan (Tashkent), Lithuania (Vilnius), Latvia (Riga ), Estonia (Tallinn), Georgia (Tbilisi).
LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.
The site includes a special offer «buy at the best price» - if other Internet resources in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.
In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.
LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.
Plant «META» - is the most reliable manufacturer of equipment for inspection. Brake stand STM produced on this plant.
Manufacturer TM «Infrakar» - a manufacturer of multifunction devices gas analyzer and smoke meter.
If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand.
You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.
Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.
While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.
Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS. We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.
If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.
We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.
Upon request, each measuring device is provided metrological certification or verification. Our staff can represent your interests in such organizations as the metrological Rostest (Rosstandart), State Standard, Derzhspozhiv standard (Derzhspozhivstandart), TSLIT, OGMetr.
Sometimes customers can enter our company name wrong - for example, zapadprybor, zapadprylad, zapadprіbor, zapadprilad, zahіdpribor, zahіdprіbor, zahidpribor, zahidprilad, zahidprіbor, zahidprybor, zahidprylad. That's right - Zapadpribor or zahіdprilad.
LLC "Zapadpribor" is the supplier of ammeters, voltmeters, power meters, frequency meters, phase meters, shunts and other devices such manufacturers of measuring equipment, such as: PO " Elektrotochpribor " (M2044, M2051), Omsk, OAO "Instrument-Making Plant "Vibrator" (M1611, Ts1611), St. Petersburg, JSC "Krasnodar ZIP " (E365, E377, E378), LLC " ZIP Partner" (Ts301 , Ts302 , Ts300) and "ZIP" Yurimov"(M381, C33), Krasnodar, OAO "VZEP" ("Vitebsk factory of electrical appliances") (E8030, E8021), Vitebsk, OAO "Electropribor" (M42300, M42301, M42303, M42304, M42305, M42306), Cheboksary, JSC "Elektroizmeritel" (Ts4342, Ts4352, Ts4353 ) Zhitomir, PJSC "Uman factory "Megger" (F4102, F4103, F4104, M4100), Uman.
© 2005 - 2017 LLC "Zapadpribor".
All rights reserved.