Equipment for maintenance checkup >> - the list of equipment for vehicle inspection >> light transmission of glass

«LYUKS» IS-2 02P device for determining the light transmission glass

For order is possible effectively delivery of any quantity.
    Device for determining the light transmission glass "LYUKS" IS-2 02P
    Device for determining the light transmission windows "LYUKS" IS-2 02P - a device with a thermal printer, designed to detect the light transmission windows for various purposes, including installed on motor vehicles.
    The range of measurement of light transmission - 4% - 100%.
    Rated supply voltage - 2.4V
    Power supply - 2 pcs. rechargeable battery 1.2V×0,8 Ah.

Overall dimensions:
    - The measuring unit - 190×105 × 42mm;
    - Illuminator - diameter 42×95mm;
    - AC adapter - 100×85×55mm.
    Weight:
    - The measuring unit with a lighter - 0.5 kg;
    - Network adapter - 0.35 kg.
    The unit "LYUKS" IS-2 02P can be used by the state traffic police as a technical means to monitor the requirements of road safety, diagnostic centers on technical inspection, as well as enterprises that perform tinting car windows.
    Constructional features and principles of the "LYUKS" IS-2 02P

    The unit "LYUKS" IS-2 02P works by determining the light transmission windows based by measuring the per-unit of the luminous flux transmitted by the glass relative to the total incident light flux.

    The measuring unit "LYUKS" IS-2 02P in a plastic housing. On the front surface of the housing unit is installed sensor. Illuminator and detector equipped with rubber pads to prevent damage to the glass during the test measurements.

    On the front surface of the housing  "LYUKS" IS-2 02P has a digital display and keypad.
    On the lateral surface of the body  "LYUKS" IS-2 02P posted universal connector for communication cable and power adapter.
    Batteries are placed in a compartment of the unit "LYUKS" IS-2 02P, closed the lid and fasten with two screws.
    Illuminator devices "LYUKS" IS-2 02P in a metal casing and connected to the measuring unit by a flexible cable. Inside the housing is installed light source, which is used as a white light LED emitter.
    Specifications "LYUKS" IS-2 02P

    The unit "LYUKS" IS-2 02P has the following specifications:
    - Unit price of LSB - 0.1%;
    - The limits of permissible basic error - ± 2,0%;
    - Warm-up time - less than 3 minutes;
    - The burden of a continuous operation from svezhezaryazhennoy battery - 50 hours;

    Devices "LYUKS" IS-2 02P suitable for use in the following conditions:
    - Ambient temperature from 5 ° C to 40 ° C;
    - Relative humidity 95% at 30 ° C;
    - Atmospheric pressure 84kPa to 106.7 kPa.

    Full average life of "LYUKS" IS-2 02P is at least 10 years of age.


Яндекс цитирования