Equipment for maintenance checkup >> - the list of equipment for vehicle inspection >> light transmission of glass

«LYUKS» IS-2 02 device for determining the light transmission glass

For order is possible effectively delivery of any quantity.
    Device for determining the light transmission glass "LYUKS" IS-2 02
    Device for determining the light transmission windows "LYUKS" IS-2 02 - a device designed to determine the light transmission windows for various purposes, including installed on motor vehicles.
    The range of measurement of light transmission - 4% - 100%.
    Rated supply voltage - 2.4V
    Power supply - 2 pcs. rechargeable battery 1.2V × 0,8 Ah.

    Overall dimensions:
    - The measuring unit - 190×105×42mm;
    - Illuminator - diameter 42×95mm;
    - AC adapter - 100×85×55mm.

    - The measuring unit with a lighter - 0.5 kg;
    - Network adapter - 0.35 kg.
    The unit "LYUKS" IS-2 02 can be used by the state traffic police as a technical means to monitor the requirements of road safety, diagnostic centers on technical inspection, as well as enterprises that perform tinting car windows.
    Constructional features and principles of the "LYUKS" IS-2 02

    Device"LYUKS" IS-2 02  works on the principle of determining the transmittance glass based by measurement in arbitrary units of the luminous flux transmitted by the glass relative to the total incident flux.

    The measuring unit "LYUKS" IS-2 02 in a plastic housing. On the front surface of the housing unit is installed sensor. Illuminator and detector equipped with rubber pads to prevent damage to the glass during the test measurements.

On the front surface of the housing IS "LYUKS" IS-2 02 digital display and keypad.
    On the lateral surface of the body IS "LYUKS" IS-2 02 posted a universal connector for communication cable and power adapter.
    Batteries are placed in a compartment of the unit "LYUKS" IS-2 02, closed the lid and fasten with two screws.

    Illuminator devices "LYUKS" IS-2 02 in a metal casing and connected to the measuring unit by a flexible cable. Inside the housing is installed light source, which is used as a white light LED emitter.
    Specifications "LYUKS" IS-2 02

    The unit "LYUKS" IS-2 02 has the following specifications:
    - Unit price of LSB - 0.1%;
    - The limits of permissible basic error - ± 2,0%;
    - Warm-up time - less than 3 minutes;
    - The burden of a continuous operation from svezhezaryazhennoy battery - 50 hours;

    Devices "LYUKS" IS-2 02 suitable for use in the following conditions:
    - Ambient temperature from 5 ° C to 40 ° C;
    - Relative humidity 95% at 30 ° C;
    - Atmospheric pressure 84kPa to 106.7 kPa.

    Full average life of "LYUKS" IS-2 02 is at least 10 years of age.

Photos: «LYUKS» IS-2 02

«LUKS» IS-2 02 device image.
«LUKS» IS-2 02 device image.
«LUKS» IS-2 02 image using the device.
«LUKS» IS-2 02 image using the device.

Яндекс цитирования