Laboratory equipment >> test equipment

IP 5150-50 Asphalt testing machine materials SP 5150-50.

IP 5150-50

782 812 RUB
203 531 UAH

Online prices include VAT.

For order is possible effectively delivery of any quantity.
Asphalt testing machine materials IP 5150-50 (IP515050, IP-5150-50, IP 50 5150, IP5150-50)
 
Asphalt testing machine materials IP 5150-50 is for testing samples in compression.
Allows to determine the ultimate strength of the material in compression.
Perhaps testing other materials within the technical characteristics of the machine.
 
Technical characteristics of the instrument testing machine asphalt materials IP 5150-50:
 
The range of measured loads - 0kN-50kN;
Measurement error 2kN load to the upper limit - ± 1% of reading;
Measurement error of less load 2kN - ± 20N;
Moving speed of the top support unit testing machine asphalt materials IP 5150-50 - 0.1 mm / min, 0.2 mm / min, 0.5 mm / min, 1mm/min, 2mm/min, 3mm/min, 5mm/min, 10mm / min, 20mm/min, 50mm/min, 80mm/min, 100mm/min;
Working stroke upper support - 300mm;
Position measuring range of the top support in testing instrument machine for testing of asphalt materials for IP 5150-50 contraction - from 0 mm to 300 mm;
Position measuring range of the top support when tested according to Marshall - from 0 mm to 10 mm;
The width of the workspace - 400mm;
Maximum power consumption of the device testing machine asphalt materials IP 5150-50 - not more than 1.2 kW;
Power - 380V, 50Hz;
Dimensions of the unit testing machine asphalt materials IP 5150-50 - 650h1000h1700mm;
Machine weight - 400 kg;
Install unit testing machine asphalt materials for IP 5150-50 antivibration mountings, special foundation is required;
Drive - electromechanical, the test cycle and data processing is fully automated;
Control device testing machine asphalt materials IP 5150-50 - from the operator panel on the LCD, the results are displayed on the LCD display;
The base model of the machine allows you to define the following characteristics of the materials:
Compressive strength
- Tensile strength of the split.
According to an additional agreement are delivered:
- Special crimping device according to the scheme for the characterization of the Marshall sdvigoustoychivosti material;
- A device for determining the limit of the tensile strength in bending and deformability indices;
- Software and hardware (computer, software, printer) that provides handling of monitored parameters and the test schedule.
In addition, the unit testing machine asphalt materials IP 5150-50 can be completed:
- Temperature-stabilized bath for testing samples of asphalt MI 5159;
- A device for cutting and other devices to the specifications of the customer;
The manufacturer guarantees that the quality of the instrument testing machine asphalt materials IP 5150-50 technical requirements specifications provided the customer terms and conditions of storage, transportation, installation, operation, and its specified operational documentation.


Яндекс цитирования