Radiometric devices >> belongings to the selective voltmeters SMV

FE 2

available:
7 pieces
For order is possible effectively delivery of any quantity.

FE 2 block lifts

Also, this device can be called: FE2, FE-2.

FE 2 block lifts complete with a dipole type DP 1 or DP 3 and the supporting structure of the antenna type ATR 2 is used to measure the field strength for measuring kit type FSM 8 and provides continuous height adjustment and antenna polarization.

FE 2 product in combination with DP 1 and ATR 2, as well as in combination with DP 3 and ATR 2 is designed to measure and control the interference field strength; useful measurement of field strength.

Specifications FE 2:

Frequency range:

- FE 2 in conjunction with the ATR 2 - 30 MHz to 1000 MHz;

- FE 2 in conjunction with a DP 1 and ATR 2 - from 26 MHz to 1000 MHz.

FE 2 block lifts to the supporting structure of the antenna type ATR 2

Characteristic impedance of the coaxial cable - 50 Ohm.

Changing the position of the antenna in azimuth:

- Position limits - ± 20°;

- The type of installation - smooth by hand.

Changing the antenna height:

- The kind of change - thus motor winch with remote control;

- Position limit - continuously from 1 m to 4 m

- Speed ​​of installation - ± 0,2 m/s.

FE 2 polarization direction:

- The type of installation - remote control actuating motor;

- Position limits - from 0° to 360° (continuously without stop);

- Speed ​​of installation - ± 6 rev/min.

Joining block lifts:

- Antenna - RF connector 7/16 TGL 25603;

- HF connecting cable LE 60 or LE 64 - HF socket 7/16 TGL 25603.

Protection class FE 2 - I by TGL 14283.

Mode - continued.

Relative time of inclusion - 33%.

Class implementation - T II by TGL 9200.

Dimensions - 2.8x4,7 m

Weight - no more than 31 kg.

FE 2 block lifts consists of elevator cable holder, cable type LE 61 and winch motor drive, remote control, cable for connection network.

Is provided as a support for the antenna.

Operating conditions FE 2:

Operating temperature range - from -30° C to +50° C.

Operating voltage - 220 V ± 10%.

The frequency - 50 Hz.

Power consumption - 530 V·A.

Storage and transport conditions FE 2:

Ambient temperature - from -40° C to +55° C.

Maximum allowable pressure steam storage - 35 Torr.

Degree of protection IP 23, splashes and dust proof.

Photos: FE 2

FE 2 block lifts image.
FE 2 block lifts image.
FE 2 remote control image.
FE 2 remote control image.
DP-1 dipole image.
DP-1 dipole image.
FE 2 cable holder image.
FE 2 cable holder image.
FE 2 lift 2 image.
FE 2 lift 2 image.
FE 2 lift 2 image.
FE 2 lift 2 image.
FE 2 winch motor drive image.
FE 2 winch motor drive image.
FE 2 winch front view.
FE 2 winch front view.
FE 2 winch side view.
FE 2 winch side view.
FE 2 winch rear view.
FE 2 winch rear view.
FE 2 winch side view.
FE 2 winch side view.
FE 2 winch overhead view.
FE 2 winch overhead view.
FE 2 winch bottom view.
FE 2 winch bottom view.


Яндекс цитирования