V7-40/1 V7-40/1
4.9 63

Voltmeter V7-40/1 digital universal (V740/1, V-7-40/1, V 7 40/1, b7-40/1, V-740/1, V 740/1, b740/1, b-7-40/1, b 7 40/1, b-740/1, b 740/1)

Is designed to measure AC and DC voltage, DC and AC currents and electrical resistance, as well as to communicate with the public channel (CPC). Used to provide measurements for setup, testing and operation of various electronic equipment and allow you to use them as stand-alone or as part of information-measuring systems. It can be used in stationary and mobile objects that do not work on the go.

Products catalog

Radiometric devices
voltmeters (V2-, V3-, V4-, V7-, V8-, V9-, F and others)
voltmeters V7
V7-40 (B7-40) device image.

  • Typical photos 

Price:

on request

 

Get price

Product information updated 12 December 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Product information updated 12 December 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Accessories, inexpensive analogues and other devices in stock(7)

Technical characteristics

Voltmeter V7-40/1 digital universal (V740/1, V-7-40/1, V 7 40/1, b7-40/1, V-740/1, V 740/1, b740/1, b-7-40/1, b 7 40/1, b-740/1, b 740/1)

Voltmeter V7-40/1 digital versatile designed to measure AC and DC voltage, DC and AC currents and electrical resistance, as well as to communicate with the public channel (CPC). Used to provide measurements for setup, testing and operation of various electronic equipment and allow you to use them as stand-alone or as part of information-measuring systems.
V7-40/1 can be used in stationary and mobile objects that do not work on the go.
Technical characteristics of the instrument voltmeter V7-40/1 digital universal:
The voltmeter is designed to operate on AC voltage 220V ± 22V, 50Hz ± 0,5 Hz with harmonic content up to 5% and ± 11V voltage 220V, frequency of 400 Hz ± 10 Hz with harmonic content up to 5%;
Ambient temperature - from -30 º C to +50 º C;
Relative humidity 98% at 25 º C;
Voltmeter V7-40/1 provides a DC voltage of positive and negative polarities of the value - 0.01 mV to 1000 V and the measurement range is 200mV, 2V, 20V, 200V, 2000V;
The limits permitted by the basic error in the measurement of the voltmeter DC:
- ± [0,05 +0,02 (U a / U-1)]% for the range 200mV, 2V;
- ± [0,1 +0,02 (U a / U-1)]% for the range 20V, 200V, 2000V,
where U to - the final value of the limit set of measurements; U - the measured voltage at the input;
B7-40/1 maintains all within measurement limits except 2000V 200V for 1 minute, a voltage equal to the final value of the next higher detection limit. Voltmeter stand for 1 minute at the limit of 200V voltage 1000V, 2000V to the limit - the voltage 1200V;
Input impedance voltmeter when measuring DC voltage is 10 megohms ± 0,1 MW on all ranges of measurements;
Input impedance of the high voltage divider DNV is 500 MW ± 25 MW;
Voltmeter V7-40/1 with a high-voltage divider, DNV provides a DC voltage of 1 kV to 30 kV, with the voltmeter match:
- 0,001 U DNV - V dc voltmeter with a high-voltage divider DNV;
- 0,0005 U DNV - V dc voltmeter with a high-voltage divider and shunt DNV "K2";
- 0,0002 U DNV - V dc voltmeter with a high-voltage divider and shunt DNV "K3";
where U DNV - the measured voltage at the input of the high voltage divider DNV;
The limits permitted by the basic error in the measurement of DC voltage:
- Voltmeter with a high-voltage divider DNV
± [0,4 +0,04 (U a / U-1)]%
- Voltmeter with a high-voltage dividers and shunts DNV "K2"
± [0,4 +0,04 (U a / U w1 -1)]%
voltmeter with a high-voltage divider and shunt DNV "short-circuit"
± [0,4 +0,04 (U a / U w2 -1)]%
where U to - the final value of the limit set of measurements voltmeter V7-40/1 (200 mV, 2 mV, 20 mV, 200 V);
U = 0,001 U DNV;
U w1 = 0,0005 U DNV;
U w2 = 0,0002 U DNV;
where U DNV - the measured voltage at the input of the high voltage divider DEV;
When measuring DC voltage rejection ratio of normal form voltmeter on the interference frequency 50 Hz, 400 Hz - not less than 40 dB;
When measuring DC voltage rejection ratio, common mode DC voltage voltmeter V7-40/1 - not less than 90 dB at 1 ohm resistance unbalance;
The voltmeter measures the mean-square value of AC voltage arbitrary waveform from 200V to 2 mV in the frequency range from 20 Hz to 100 kHz, more than 200V to 500V at frequencies from 20 Hz to 5 kHz, and has a limit of measurement: 200mV, 2V, 20V, 200V, 2000V. Crest factor of the measured voltage to a ≤ 3, and the maximum value of the input voltage voltmeter no more than 1000 V;
The limits permitted by the basic error of V7-40/1 in the measurement of AC-form with the values ​​of the measured voltage of up to 0,01 U U are equal to:
- ± [1 +0,1 (U a / U-1)]% in the frequency range 20Hz-40Hz;
- ± [0,6 +0,1 (U a / U -1)]% in the frequency range 40Hz-10KHz;
- ± [1 +0,1 (U a / U -1)]% in the frequency range 10kHz-20kHz;
- ± [5 +0,15 (U a / U-1)]% in the frequency range 20kHz-50kHz;
- ± [10 +0,4 (U a / U-1)]% in the frequency range 50kHz-100kHz;
to within 200mV of measurements; 2B, 20B, 200B;
- ± [1 +0,1 (U a / U-1)]% in the frequency range 20 Hz-40 Hz and 1 kHz, 5 kHz;
- ± [0,6 +0,1 (U a / U-1)]% in the frequency range 40Hz-1kHz;
at the limit of measurement 2000V,
where U to - the final value of the limit set of measurements; U-value of the measured voltage at the input;
Voltmeter V7-40/1 with variable voltage divider cash flow provides a measure of the mean square value of AC voltage by a factor of arbitrary shape and amplitude for the <3 from 500V to 1000V in the frequency range from 20 Hz to 1 kHz, with a maximum value of the input voltage divider may be a maximum 3000V4
Voltmeter readings correspond to 0,001 U of cash flow,
where U of cash flow - the measured voltage at the input AC voltage divider DPN;
The limits permitted by the basic error voltmeter V7-40/1 with variable voltage divider cash flow as measured rms ac voltage of arbitrary shape:
- ± [1 +0,1 (U a / U-1)]% in the frequency range 20Hz-40Hz;
- ± [1 +0,1 (U a / U-1)]% in the frequency range 40Hz-1kHz,
where U to - the final value of the limit set of measurements voltmeter; U = 0,001 CF;
The input resistance of V7-40/1 in the measurement of AC voltage is equal to 1 MW ± 0,1 MW.
Input shunt capacitance of less than 50pF, capacitance measurement accuracy of ± 5%;
Voltmeter V7-40/1 with RF probe provide a measure of the mean square value of the voltage sine wave in the frequency range of 50kHz-1000MHz. The ranges of the measured voltages with a voltmeter RF probe:
from 0.1 V to 15 V in the frequency range from 50kHz to 10MHz;
from 0.1 to a value determined by the formula
U max = (1,5 ∙ 10 August) / ƒ,
where ƒ-frequency voltage measured in the frequency range from 10MHz to 50MHz from 0.1V to 3V in the frequency range of 50MHz-1000MHz;
The limits permitted by the basic error voltmeter V7-40/1 with RF probe in the measurement of the mean square value of AC voltage sine wave:
- ± [10 +0,6 (U a / U-1)]% in the frequency range 50 kHz-50 MHz,
where U k - value of AC voltage equal to 15 V; U - value of the measured voltage to the RF input of probe B;
- ± [10 +3 (U a / U-1)]% in the frequency range of 50MHz-300MHz;
- ± [20 +2 (U a / U-1)]% in the frequency range of 300MHz-800MHz;
- ± [30 +2 (U a / U-1)]% in the frequency range of 800MHz-1000MHz;
where U to - the final value of the AC voltage measured with a voltmeter with high frequency probe equal to 3V; U - the measured voltage at the input RF probe;
When measuring AC voltmeter V7-40/1 with RF probe readout of measurement results of measurements carried out on the range 200mV, 1V, 2V, 20V mode DC voltage;
Input impedance of the RF probe at a frequency of 50 kHz - not less than 150 ohms;
Input shunt capacitance of less than 5pF. Measurement error of the input resistance and input capacitance of less than ± 10%;
Voltmeter V7-40/1 provides a measurement of DC current of 0.01 mA to 2000mA (Bypassed "10A", up to 10A) and has a measurement range limits: 200uA, 2mA, 20mA, 200mA, 2000mA;
The limits permitted by the basic error voltmeter for measuring the DC:
- ± [0,2 +0,02 (I a / I-1)]% on all ranges of measurements
where I to - the final value of the limit set of measurements; I - force value measured dc power input;
- ± [0,4 +0,02 (I a / I-1)]% of the shunt "10A"
where I to - the final value of the measured voltage meter with a shunt DC current equal to 10A; I - force value measured dc power input, A;
Voltmeter V7-40/1 provides a measure of the mean square value of AC current arbitrary waveform from 2mkA to 200mA in the frequency range 40Hz-20kHz, and more than 200mA to 2000mA (Bypassed "10A", up to 10A) in the frequency range of 40Hz-2kHz and has a limit of measurement: 200uA, 2mA, 20mA, 200mA, 2000mA;
The limits permitted by the basic error in the measurement of the mean square value of AC current arbitrary waveform with the values ​​of the measured current of up to 0,01 I I to:
- ± [1 +0,1 (I a / I-1)]% in the frequency range 40Hz-10KHz;
- ± [2 +0,1 (I a / I-1)]% in the frequency range of 10kHz to 20kHz range for measurements 200uA, 2mA, 20mA, 200mA;
- ± [1 +0,02 (I a / I-1)]% in the frequency range of 40Hz-2kHz at the limit of measurement and 2000mA with a shunt 10A,
where I to - the final value of the limit set dimension (for voltmeters with a shunt to I = 10A); I - force value measured AC input;
Voltmeter V7-40/1 provides a measurement of the electrical resistance of 0.01 Omdo 20 MW and has the measurement range: 200 ohms, 2 ohms, 20 ohms, 200 ohms, 2000 ohms, 20 MW;
The limits permitted by the basic error voltmeter to measure electrical resistance:
- ± [0,15 +0,05 (R a / R-1)]% in the range of 200 ohms, 2 ohms, 20 ohms, 200 ohms, 2000 ohms;
- ± [0,5 +0,1 (R a / R-1)] 20% at the limit MOhm
where R is a - the final value of the limit set of measurements; R - value of the measured electrical resistance at the input;
DC current flowing through the measured resistance is equal to the values ​​given in Table 3;
Table 3 DC current flowing through the resistance being measured
 
The limit of resistance measurement
Amperage
200 ohms
1mA ± 0,05 mA
2 k
1mA ± 0,05 mA
20 kohms
1 uA ± 0,05 mA
200 k
1 uA ± 0,05 mA
2000 ohms
1 uA ± 0,05 mA
20 M
1nA ± 0,05 nA

The maximum value of the DC voltage to the measured resistance (voltage on the open sockets) not more than 10V. Voltage measurement error not exceeding 5%;
Voltmeter V7-40/1 with the measuring cable K1 measures a constant voltage of 0.01 mV to 40 V and RMS AC voltage arbitrary waveform amplitude by a factor of K and N ≤ 2 mV to 40 V from a frequency range of 20Hz-100kHz;
Voltmeter maintains its specifications within the standards set specifications, when powered from the mains AC 220V ± 22V, 50Hz ± 0,5 Hz with harmonic content up to 5% or 220V ± 11V, frequency of 400 Hz ± 10 Hz with harmonic content up to 5%;
Power consumed by the V7-40/1 from the power supply at rated voltage not exceeding 30 V ∙ A. The error of measurement of power consumption is not more than ± 5%;
Life more than 8000 hours. The bodies of multiple control and regulation provide 30,000 switching cycles;
Gamma-percent life voltmeter B7-40/1 - of at least 10,000 hours at γ = 90%;
Gamma-percent service life of at least 10 years old at γ = 90%;
Average recovery time less than 10 hours;
The probability of no latent failures not less than 0.95 for calibration interval 12 months, with an average utilization rate of 0.04;
Dimensions voltmeter - 304h80h320mm;
Weight V7-40/1 - no more than 5.5 kg;
The device V7-40/1 has a built in timer operating time. Operating time counter records the time of use in temperatures ranging from -10 º C to +50 ° C.
Rate the product: V7-40/1
Number of views: 2270
Product rating: 4.5
Number of grades: 541
* rating and all product statistics are updated once a month; information is current as of 22 December 2024

Poll

How did you find out about zapadpribor.com?

search engines

exhibition

online media

printed editions

colleagues advice

Vote

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.