SMV 8,5 SMV 8,5
4.9 63

Selective Microvoltmeter SMV 8.5, voltage interference measure SMV 8.5 (SMV8.5, SMV-8.5)

 

Microvoltmeter SMV8.5 is highly sensitive measuring heterodyne receiver, operating in frequency range 26MHz-1000MHz.
Device is designed to measure high-frequency sinusoidal voltage and quasi-peak voltage interference measurements.  Selective microvoltmeter SMV8.5 can be used as measuring device of field strength interference with measuring antenna type DP 3/ATR 2, DP 1/ATR 2 or LPA1-ATR2.

 

SMV 8,5 device image.

Price:

on request

 

Product information updated 05 October 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Product information updated 05 October 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Technical characteristics

 Selective Microvoltmeter SMV 8.5, voltage interference measure SMV 8.5 (SMV8.5, SMV-8.5, SMV 8.5)
Microvoltmeter SMV8.5 is highly sensitive measuring heterodyne receiver, operating in frequency range 26MHz-1000MHz.
Device is designed to measure high-frequency sinusoidal voltage and quasi-peak voltage interference measurements.  Selective microvoltmeter SMV8.5 can be used as measuring device of field strength interference with measuring antenna type DP 3/ATR 2, DP 1/ATR 2 or LPA1-ATR2.
 
Selective Microvoltmeter SMV8.5 Technical characteristics
 
Device is used for :
High voltage selective measurements, particularly of mixed frequencies, such as spectra measurement modulation, harmonics and distortion measurements;
        Impulse voltage and sinusoidal interference measurements in order to eliminate reception of  radio interferences;
        Useful field strength measurements and field strength interference in electromagnetic  fields in conditions of stationary operation, and outside laboratory at open air;
With built-in generator attenuation and amplification measurements can be done. For example, together with reflection coefficient measuring bridge, or with directional coupler, or with measuring line, there is a possibility to measure alignment without a use of measuring generator. Attenuation measurements limit with a use of built-in generator is 95dB (built-in generator output voltage is equal to 95dB comparatively  to 1mkV resistance load of 50 Ohm);  
For example, at short-term voltage measurements, of frequency characteristics mesurements of automatic calibration gain control can be switched. This simplifies and shorts the receiver’s calibration process, so frequency characteristics measurements are greatly accelerated;
With voltage external changes slow narrow-band swing is provided with bandwidth of 1 kHz. With oscilloscope connection you can get frequency spectrum image and find interfering signals in modulation spectra;
Operating temperature range SMV8.5 - of-30 º C to +50 º C;
Maximum permissible water vapor pressure for period of not more than 500 hours - 35torr; Shock resistance of 6ms duration - maximum acceleration 12g, strokes amount - 1000;
Frequency range SMV8.5 -26 MHz - 1000 MHz  - 5 subranges - 1) 26 MHz -66MHz; 2) 66MHz-142 MHz;  3) 142 MHz -300MHz; 4) 300 MHz-600 MHz; 5) 600MHz-1000MHz;
Frequency scale error after calibrating at nearest mark -
±(3∙10-3∙fe+200kHz);
Frequency marks - n∙5MHz and n∙20MHz;
Receiver part frequency instability without additional frequency scale calibration on internal frequency marks:
- voltage oscillations ± 10% - <2∙10-5;
- battery voltage oscillations 15%, -5% at unregulated battery voltage 12V - <4∙10-4;
- battery voltage oscillations ± 10% at regulated battery voltage 16V-30V - <2∙10-5;
- with ambient temperature changes - 2∙10-4/ºС±10kHz / º C;
SMV8.5 reference voltage types:
- AV 1 - average value of AM signals, reference limit 20 dB;
- AV 2 - average value of AM signals, reference limit 40 dB;
- QP - quasi-peak CISPR value;
- P - peak value;
SMV8.5voltage measurement limits:
- At work form AV1:
- 0dB-125dB (comparatively to 1mkV) or 5dB-120dB (comparatively to 1mkV with amplification increase on 5 dB);
 
- The lowest voltage for devices indicator complete deviation - 10dB (comparatively to 1mkV) or 10dB (comparatively to 1mkV amplification increase - 5 dB);
- Voltage at signal / noise 6 dB at bandwidth 20 kHz - ≤ 1mkV;
- At the form of work AV 2:
- The lowest voltage for devices indicator complete deviation - 20dB (comparatively to 1mkV);
- At work form  QP - for CISPR;
- For impulse voltage interferences at impulse frequencies repetition:
 
Impulse repetition frequency
Measurement limit
<2Hz
10dB-45dB (75dB) (comparatively to 1mkV)
≥2Hz
10dB-50dB (80dB) (comparatively to1mkV)
≥5Hz
10dB-55dB (85dB) (comparatively to 1mkV)
≥10Hz
10dB-60dB (90dB) (comparatively to 1mkV)
≥50Hz
10dB-70dB (100dB) (comparatively to 1mkV)
≥100Hz
10dB-75dB (105dB) (comparatively to 1mkV)
≥500Hz
10dB-80dB (110dB) (comparatively to 1mkV)
≥1kHz
10dB-85dB (115dB) (comparatively to 1mkV)
 
- for sinusoidal voltages - 10dB-85dB (125dB) (comparatively to 1mkV);
- the lowest voltage at complete devices indicator deviation - 10dB (
comparativelyto 1mkV);
SMV8, 5 voltage measurement error:
- Sinusoidal voltage at work form AV1:
- At ambient temperature +23 º C measuring limits 70dB - 75dB (
comparativelyto 1mkV) - in divider position BCh- 30 dB, in High Frequency divider position - 35 dB ± 0.8 dB;
- Additional measurement error in other divider position in frequency ranges:
- 26 MHz -300MHz - ± 0.4 dB;
- 300MHz-1000MHz - ± 0.7 dB;
- Depending on ambient temperature - ± 0.02 dB / º C;
- Sinusoidal voltage at AV2 work type - in addition to error ± 3 dB;
- Interference voltage at QP work type;
- Impulse voltage for values ≥ 10 dB (
comparatively to 1mkV) within devices indication of 5dB-10dB:
- In dividers position of intermediate frequency 5dB - ± 3 dB;
- In dividers position of intermediate frequency 0 dB - ± 6 dB;
- Impulse voltage for values ≥ 10 dB (
comparatively to 1mkV) within devices indication 5 dB-10 dB in noise characteristics adjustment:
- In dividers position of intermediate frequency  5dB - ± 1 dB;
- In dividers position of intermediate frequency 0dB- ± 2dB;
- Signals amplitude modulation in P work type - in addition to error ± 1 dB;
SMV8. 5 measurement error, connection of two voltages  at AV1work type :
- Dividers error voltage in following ranges:
- 26 MHz -300MHz - ± 0.6 dB;
- 300MHz-1000MHz - ± 0.9 dB;
- Devices indicator calibration scale error in readings limit 0dB-10dB - ± (0.05 dB/1dB+ 0.1 dB);
SMV8.5 input resistance:
- Z = 50 Ohm;
   
- type of connection - high-frequency plug corps 50 Ohm «N» series;
- matching coefficient  in High Frequency voltage attenuation ≥ 20 dB in frequency range:
- 26 MHz -300MHz - ≤ 1.11;
- 300MHz-1000MHz - ≤ 1.25;
- matching coefficient in High Frequency voltage attenuation 0dB - ≤ 2;
SMV8.5 bandwidth - 120 kHz, 20 kHz, 1 kHz (for frequencies oscillation mode - additional voltage measurement error ± 0.5 dB);
Intermediate frequency selectivity:
- bandwidth 120 kHz
 
decrease
6dB
40dB
bandwidth
120kHz±20kHz
<300kHz
 
- bandwidth 20kHz
decrease
3dB
40dB
bandwidth
20 kHz ±5 kHz
<200 kHz
 
Attenuation frequencies SLR channel in the range:
- 20MHz-300MHz -> 80 dB;
- 300 MHz /1000 MHz -> 60 dB;
Intermediate frequency attenuation in the range of:
- 20MHz-300MHz -> 80 dB;
 - 300MHz /1000MHz -> 70 dB;
 Other types channels attenuation:
  
- suppression at next wave -> 60 dB; for unmodulated high frequency signals U1=U2=60 dB (comparatively to 1mkV) at dividers high frequency input cause for frequency range f1-f2=500kHz frequency voltage interferences in 2f1-f2<0 dB (comparatively to 1mkV );
- Components of signal conversion attenuation
fin=n∙fgen± ff -> 60 dB;
Automatic frequency control of SMV8.5 is made by second local oscillator or calibration generator;
Amplitude-and frequency-modulated signals audition device SMV8.5 device - with built-in speaker, main phone connection;
SMV8.5 power supply – 220V ± 10%, 110V ± 10%;
Network frequency - 48 Hz -62Hz and 400Hz;
Power consumption - 15 V ∙ A;
SMV8.5 power from external battery:
- battery voltage - unregulated - 12V +15%, 12V- 5%, regulated – 16V-30V;
- current consumption - 300mA;
SMV8.5 dimensions – 550x200x400mm
3;
Weight - 22kg.
 
Rate the product: SMV 8,5
Number of views: 2949
Product rating: 4.3
Number of grades: 497
* rating and all product statistics are updated once a month; information is current as of 23 October 2024

Photos SMV 8,5

SMV 8,5 device image.

SMV 8,5 device image.

SMV 8,5 front view.

SMV 8,5 front view.

SMV 8,5 side view.

SMV 8,5 side view.

SMV 8,5 rear view.

SMV 8,5 rear view.

SMV 8,5 overhead view.

SMV 8,5 overhead view.

SMV 8,5 bottom view.

SMV 8,5 bottom view.

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.