SHUM-1M20 SHUM-1M20 Sound Level Meter Noise-1M20.
4.9 63
Sound level meter SHUM-1M20 (SHUM1M20, SHUM-1-M20, SHUM 1 M20, SHUM 1M20, SHUM1-M20, SHUM1 M20)
Designed to measure the levels of stationary neimpulsnyh sounds (noise) on the threshold of the laboratory and industrial conditions;
Frequency Range - 31.5 Hz-8000Hz.
The frequency characteristics - A, B, C.
Dynamic range - 20dB-120dB.
SHUM-1M20 Sound Level Meter Noise-1M20.

Price:

on request

 

Product information updated 02 October 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Product information updated 02 October 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Technical characteristics

Sound level meter SHUM-1M20 (SHUM1M20, SHUM-1-M20, SHUM 1 M20, SHUM 1M20, SHUM1-M20, SHUM1 M20)
 
Sound level meter SHUM-1M20 is designed to measure the levels of stationary neimpulsnyh sounds (noise) on the threshold of the laboratory and industrial conditions.
Can be used in the traffic police and sanepidemstantsiyah to measure the levels of municipal, industrial and street noise in order to verify their compliance with existing state standards and sanitary regulations.
Principle of the device is to measure the electrical signal from your microphone and sound pressure is proportional to the acoustic noise.
The device is sound level meter SHUM-1M20 consists of a microphone, preamplifier, attenuator input amplifier, filters, final amplifier, inverter and generator calibrated signal.The electrical part of the sound level meter is collected in a small metal case. To eliminate the disturbing action of the reflected sound from the body of the upper part of it has konusoidalnuyu form. In the upper part of the measuring microphone is located. The back cover removable sound level meter. It is threaded bushing for mounting sound level meter on a tripod.
The electronic circuit device sound level meter SHUM-1M20 assembled on printed circuit boards, assembled on the pre-amplifier cards with contacts for electrical connection to the electronic circuit sound level meter.By pre-amplifier with thread attached capsule condenser measurement microphone. On the front panel are the most important controls: switch ranges of measured levels, mode selector switch, instrument calibration and pen.
Sound level meter SHUM-1M20 has a socket "Exit" for connecting external devices to analyze the input impedance of no less than 10 ohms.
 
Technical characteristics of the instrument sound level meters SHUM-1M20:
 
Frequency Range - 31.5 Hz-8000Hz.
Frequency characteristics of sound level meter, the instrument SHUM-1M20 - A, B, C.
Dynamic range - 20dB-120dB.
The basic error of measurement instrument sound level meter SHUM-1M20 at a frequency of 1000 Hz - no more than ± 2%.
The error limits of the switch - no more than ± 1 dB.
The error of the grading scale shows the device - no more than ± 0,5 dB.
Accuracy of the energy summation of the frequency components of noise sound level meter SHUM-1M20 - no more than ± 0,25 dB.
Adjustment range of electrical calibration with respect to the installation level - not less than ± 2 dB.
Power supply Noise Sound Level Meter SHUM-1M20, two batteries, "Crohn's EC" connected in series, voltage 15V-18V.
Current consumed by the sound level meters from the battery - no more than 2.8 mA.
Overall dimensions sound level meter SHUM-1M20 - 260h85h65mm.
Weight - 1.1 kg.
 
Rate the product: SHUM-1M20
Number of views: 1652
Product rating: 4.4
Number of grades: 415
* rating and all product statistics are updated once a month; information is current as of 16 October 2024

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.