S1-101 S1-101
4.9 63

Oscilloscope S1-101 (S1 101, S1101, c1-101, c1 101, c1101)

Suitable formulas for the study of periodic electrical signals by visual observation and measurement of the amplitude in the range from 0.01 V to 300 V, and time intervals of 0.3 · 10 -6 s to 0.4 s.
Frequency range from 0 to 5 MHz.
The range of values ​​of the coefficient of variation: 0.005, 0.01, 0.02, 0.1, 0.2, 0.5, 1, 2, 5 V / div.
Basic error limit of deflection factors should be ± 7%.
The margin of error with a remote 1:10 divider must be ± 7%.
Yield bias error coefficients in the working conditions must be ± 8%.

Products catalog

Radiometric devices
oscilloscopes (S1-, S7-, S8-, S9-, Ya40-, Ya4S-, Ya9S- and others)
universal oscilloscope (S1-, Ya40-, Ya4S- and others)
S1-101 (C1-101) device image.

Price:

on request

 

Get price

Product information updated 02 December 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Product information updated 02 December 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Accessories, inexpensive analogues and other devices in stock(5)

Technical characteristics

Oscilloscope S1-101 (S1 101, S1101, c1-101, c1 101, c1101)

Suitable formulas for the study of periodic electrical signals by visual observation and measurement of the amplitude in the range from 0.01 V to 300 V, and time intervals of 0.3 · 10 -6 s to 0.4 s.
Frequency range from 0 to 5 MHz.
The range of values ​​of the coefficient of variation: 0.005, 0.01, 0.02, 0.1, 0.2, 0.5, 1, 2, 5 V / div.
Basic error limit of deflection factors should be ± 7%.
The margin of error with a remote 1:10 divider must be ± 7%.
Yield bias error coefficients in the working conditions must be ± 8%.

Oscilloscope S1-101 universal chip is designed to study formulas periodic electrical signals by means of visual observation and measurement of the amplitude in the range from 0.01 V to 300 V, and time intervals of 0.3 · 10 -6 s to 0.4 s, the frequency range from 0 up to 5 MHz
According to signal fidelity, measurement time and amplitude values ​​oscilloscope S1-101 belongs to the class III GOST 22737-77 "cathode-ray oscilloscope. Nomenclature parameters. General requirements."
Operating conditions n ribora Oscilloscope S1-101
Operating ambient temperature from -30 ° C to +50 ° C with power supply I22.087 457 - from -20 ° C to +50 ° C, relative humidity up to 98% at temperatures up to +35 ° C, with the block Power I22. 087,457 - up to 80% at +35 ° C device operates normally after exposure (in the packing box) shock
repeated action with acceleration up to 147 m / s 2 and a pulse duration of 5 ms and 10 ms, a single action with acceleration up to 735m / s 2 and the duration of 1 ms to 10 ms.
Oscilloscope S1-101 resistant to cyclical changes in ambient temperature from -50 ° C to +65 ° C with power supply I22 087,457 - from -50 ° C to +60 ° C.
Oscilloscope S1-101 can be used in the design, configuration and adjustment of electronic circuits, for inspection and repair of instrumentation and automation of various devices in the laboratory and in the field, especially in hard to reach places when setting up and testing of computing devices
 
Technical data
 
Range rejection coefficient. 0.005, 0.01, 0.02, 0.1, 0.2, 0.5, 1, 2, 5V/div.
Basic error limit of deflection factors should be ± 5% margin of error with external divider must be January 10 ± 7% margin of error coefficients of variation in working conditions must be ± 7,5%
In all positions of the switch "V / DIV" permitted the rise or decline the leading edge of the rectangular pulse of ± 5%, with external divider 1:10 - in the range of ± 20%
Rise time of the channel vertical deviation must be less than 70 ns with the direct input and no more than 100 ns with a divider 1 x 10
Release of the transient response of the channel vertical deflection should be no more than 5% - in all positions of the switch "V / DIV", 8% - with external divider 1 10.
Time of the transient characteristics of the channel vertical deviation should be less than 210 ns, with external divider 1 × 10 - less than 250 ns.
Irregularity of the transient response to be no more than ± 3%
Recession vertices (with closed inlet) must be no more than 10% at a test pulse duration 10 ms
Parameters input channel vertical deflection:
Input resistance at the open inlet (1 ± 0,02) megohms,
input capacitance (40 ± 4) pF
External divider must have an active input impedance (1 ± 0,03) MW and the input capacitance of less than 15 pF.
Permissible total value of the DC and AC voltage gated entrance ("~") channel oscilloscope vertical deflection device S1-101 should not be more than 200, and with a divider 1 · 10 to 300 V.
The limits of the vertical displacement of the beam shall be not less than two times the rated vertical deflection
The range of values ​​of the coefficients sweep
0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50 ms / div,
0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50 ms / div
0.1, 0.2 s / div.

Basic error limit of sweep must be ± 3% at the measured image size from 6 to 7 bar working part of the sweep, and ± 4% for all other image sizes from 4 to 8 bars in the range of 2 ms / div - 50 ms / div ± 5% the range of 0.1 - 1 mkc / div
Sweep 0.1 s / div and 0.2 s / div are screening. The margin of error in scanning the coefficients operating conditions must be ± 4,5% measured with the image size of 6 to 7 bar and the working part of the sweep ± 6% for the remaining image sizes of from 4 to 8 bar in the range 2 ms mks/del-50 / Affairs, ± 7,5% in the range of 0.1 - 1 ms / div
Margin of the beam in horizontal alignment should provide rocked and the end of the working parts of the scanning center of the screen. Parameters of the internal clock synchronization frequency range should be from 20 Hz to 5 × 10 6 Hz, the minimum and maximum timing should be 3 mm (06 cases) and 30 mm (6 cases), respectively, the instability of the synchronization should be no more than 1 mm (0 , 2 cases). External synchronization parameters: frequency range of external synchronization must be 20 Hz to 5 × 10 6 Hz, the minimum and maximum timing should be 0.5 V and 20 V respectively, the instability of the synchronization should be no more than 1 mm (0.2 cases) External trigger input for the input "Ext January 1", the input resistance - not less than 50 ohm input capacity - not more than 30 pF for input "Ext January 10," Input resistance - not less than 750 ohms, the input capacitance - more than 20 pF.
Effective screen of the oscilloscope should be 40mm at 8 bar (price for 1 division - 5 mm) horizontally, 30 mm or 6 bars (dividing the price of 1 - 5 mm) vertically. The line width of the beam shall be not more than 0.6 mm.
Short term drift Oscilloscopes S1-101 after 5 min of heating must be not more than 1 mV for 1 min operation. Long-term drift - 5 mV / hr for 1 hour
The displacement of the beam line at the transition from one value to another coefficient of variation should be no more than 1 div
The displacement of the beam line due to the input current does not exceed 1 cases.
The displacement of the beam line when the supply voltage must be no more than 0.2 cases.
Periodic and (or) random deviations should be no more than 3% of the rated deflection.
Adjust the brightness to change the brightness of the image to ensure the total absence to a comfortable to watch.
The internal power supply shall generate a calibrated rectangular pulses with a repetition rate of 1 kHz and an amplitude of 0.05 V and 1 V
The margin of error pulse amplitude calibrator should be
± 1,5% - in normal circumstances,
± 2% - in working conditions.
The margin of error pulse frequency calibrator should be
± 1% - in normal circumstances,
± 1,5% - in working conditions.
The maximum amplitude of the signal should be no more than 30 - to the vertical position of the inlet channel, 300 V - input divider 1 10.
The amplitude of the sinusoidal voltage must not exceed 15V and 150V respectively.
The amplitude of the voltage sweep, extracted at the nest "OL" should be at least 2 V at no less than 20 ohms with an output capacity of no more than 20 pF. Overall dimensions (281 h155x 69) mm. Overall dimensions in the packing box - (526 x265h200) mm. Overall dimensions of shipping containers - (725X406X 323) mm. Weight of the device should be less than 1.8 kg, with power supply I22.087.459 - not more than 2,3 kg, with power supply I22 087,457 - less than 2,5 kg, with a divider I22.727.095 - not more than 1.9 kg.
Weight of the device Oscilloscope S1-101 in the packing box should be no more than 10 kg.
Weight of the device in transport containers should be no more than 22 kg.
The power consumed by the device from AC mains at the rated voltage should be no more than 18VA.
Current consumed from the DC power at a voltage of 12 V and 27 V must be no more than 0.70 A.
Oscilloscope S1-101 should retain its specifications within the standards set by the technical specifications for their nutrition from AC with a frequency of (50 ± 0,5) Hz voltage (220 ± 22) and harmonic content up to 5% or frequency ( 400 ± 10) Hz and voltage (115 ± 5,75) B and (220 ± 11) and a harmonic content up to 5% of the constant current sources (12 ± 1,2) B and (27 ± 2,7) V from the power supply I22 087,457.
Note: When you export supply and availability requirements in the purchase order, it is possible revision of the device to ensure its supply of AC frequency (50 ± 0,5) Hz (230 ± 23) V or (240 ± 24) and the content harmonics up to 5%. These devices are not intended for inclusion in the AC line voltage of 220 V and 115 V.
Oscilloscope S1-101 should be capable of continuous operation in the working conditions for a time at least 16 hours while maintaining its specifications within the standards set specifications.
While allowing the normal modes of vacuum, semiconductor, electric components within the norms, standards and technical specifications for these
When the instrument oscilloscope S1-101 unit I22 087 457 of length should be in normal conditions for at least 1 h at a temperature of +50 ° C for at least 40 minutes at -20 ° C for at least 20 minutes.
Mean time to failure of the device (It) should be no less than 3500 hours The device should be capable of long-term storage in a heated and unheated storage capital.
Shelf life Oscilloscopes S1-101 in a heated storage for at least 12 years of age. Shelf life major appliance in an unheated storage for at least 10 years of age.
Shelf life with the power supply unit I22 087 457 at least 3 years Average lifetime without power supply 087,457 I22 at least 10 years of age. Average life 10,000 hour average life of the appliance to the power supply I22 087,457, including storage, 3 years. Within 3 years of power supply I22 087,457 to withstand at least 150 cycles (charge-discharge).
Rate the product: S1-101
Number of views: 2904
Product rating: 4.7
Number of grades: 504
* rating and all product statistics are updated once a month; information is current as of 19 December 2024

Photos С1-101

S1-101 (C1-101) device image.

S1-101 (C1-101) device image.

S1-101 (C1-101) front view.

S1-101 (C1-101) front view.

S1-101 (C1-101) side view.

S1-101 (C1-101) side view.

S1-101 (C1-101) rear view.

S1-101 (C1-101) rear view.

S1-101 (C1-101) overhead view.

S1-101 (C1-101) overhead view.

S1-101 (C1-101) bottom view.

S1-101 (C1-101) bottom view.

Poll

How did you find out about zapadpribor.com?

search engines

exhibition

online media

printed editions

colleagues advice

Vote

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.