R33 R33
4.9 63

Shop resistance measuring R33 (R-33, R 33)
It is used as a measure DC resistance and enables the production of resistance of 0.1 ohms to 99999.9 ohms.
Accuracy Class 0.2 / 6 • 10 -6.

Electrical measuring instruments
measures and boxes
R33 (P33) device image.

Price:

on request

 

Product information updated 05 December 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Product information updated 05 December 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Technical characteristics

Shop resistance measuring R33 (R-33, R 33)
It is used as a measure DC resistance and enables the production of resistance of 0.1 ohms to 99999.9 ohms.
Accuracy Class 0.2 / 6 • 10 -6.

Shop resistance measuring R33 are used as measures of direct current resistance, and enable us to obtain the resistance of 0.1 ohms to 99999.9 ohms.
Shop resistance R33 is designed to operate at an ambient temperature of 10 to 30 ° C and a relative humidity of 25 to 80% of the operating temperature range. Normal conditions: temperature (20 ± 5) ° C, relative humidity of 25 to 80% of atmospheric pressure 84-106.7 kPa (630-800 mm Hg).
Shops of resistance R33 is exported to countries with tropical climates, suitable for use in dry, heated spaces at an ambient temperature of 10 ° to 35 ° C, the normal operating temperature (27 ± 5) ° C. In this case, the plant designation store should be 04.2 * P33.

Technical data

Accuracy class shopping P33 0.2 / 6 • 10 -6. Limit of acceptable deviation of the actual value of the resistance store as a percentage of the nominal measured under normal conditions, is given by:
δ = ± [0,2 + 6 • 10 -6 (Rc / R - 1)]
where Rk - the greatest resistance value store, Ohm;
R - the nominal value of a resistor in ohms.

The limit of additional error caused by changes in ambient temperature between the upper (lower) limit the range of normal conditions of use and by some point in the related field of application of the operating temperature corresponding to the maximum change in resistance, which is numerically equal to the value determined by the formula set out above.
The limit of additional error in percent of the nominal value when the power dissipation of the face to any value that does not exceed the maximum power under normal conditions of use and steady thermal equilibrium does not exceed the value determined by the formula.
Termokontaktnaya emf in the measuring chain store P33 at fixed switching devices does not exceed 10mkV. The average value of the initial resistance, ie resistance during the installation of the ten-day switches to zero indication shall not exceed 0.06 ohm. The variation of initial resistance due to the change of the contact resistances of contacts switching devices does not exceed 0,006 ohms.
Nominal impedance of one stage of the maximum (maximum on resistance) of the decade - 10000 ohms. Nominal impedance one step lower (lower on resistance) of the decade - 0.1 ohms. Power rating by one notch (with resistance from 1 to 10 4 ohm) 0.25 W (0.1 ohm resistor) - 0.1 watts. The maximum power at one level of 0.5 W (resistance of 1 to 10 4 ohms) 1W (the resistance of 0.1 ohms.) The insulation resistance between the case and isolated dc measurement chain store P33 in the working conditions of application of at least 500MOm.
Isolation between the housing and isolated DC measuring circuit stores P33 stands for 1 min. test voltage of 2 kV value. practically sinusoidal AC 50 Hz. Dimensions 260h185h110mm store. Weight less than 2.5 kg.

Rate the product: R33
Number of views: 2593
Product rating: 4.4
Number of grades: 540
* rating and all product statistics are updated once a month; information is current as of 19 December 2024

Photos Р33

R33 (P33) device image.

R33 (P33) device image.

R33 (P33) front view.

R33 (P33) front view.

R33 (P33) side view.

R33 (P33) side view.

R33 (P33) rear view.

R33 (P33) rear view.

R33 (P33) overhead view.

R33 (P33) overhead view.

R33 (P33) bottom view.

R33 (P33) bottom view.

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.